COM1 port error Bitminter | Bitcointalksearch.org

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: danialQsk on April 28, 2015, 05:56:40 PM

Quote from: notlist3d on April 28, 2015, 01:40:44 PM

Quote from: danialQsk on April 28, 2015, 01:37:21 PM

Quote from: Amph on April 28, 2015, 05:44:21 AM

"it say no external device detected"...

so...have you installed the correct drivers? you need a restart after the installation

yes i was do that by IObit Driver booster
i don't have any other external device
my first Qestion is bit mining just whit a normal computer is possible? or i should use an other hardwares ?
and if it's possible how i can fix this problem

Yes it's looking for other hardware... like asics. If you are trying to mine with gpu/cpu most lose money doing it at this point. It brings in a tiny amount. And if your trying to mine BTC with GPU/CPU it will not work just can't compete with asics.

Are you trying to mine BTC with a regular computer? Just making sure i understood your post right.

tnx very much for your answer
yes i'm trying to mine with a regular pc (gpu 2gig cpu3.6) but its bitcoin amount dose not matter for me even if it is very tiny i'm just wanna know this processes will possible by a GPU/CPU or i should buy an asics for start mining

Not a problem. You will not make money but i suggest looking at USB stick miners. One of those will allow you to learn about mining and try it out.

And no stress on your CPU/GPU. If you have a Raspberry Pi you can even run it from it.

danialQsk

newbie

Activity: 4

Merit: 0

Quote from: notlist3d on April 28, 2015, 01:40:44 PM

Quote from: danialQsk on April 28, 2015, 01:37:21 PM

Quote from: Amph on April 28, 2015, 05:44:21 AM

"it say no external device detected"...

so...have you installed the correct drivers? you need a restart after the installation

yes i was do that by IObit Driver booster
i don't have any other external device
my first Qestion is bit mining just whit a normal computer is possible? or i should use an other hardwares ?
and if it's possible how i can fix this problem

Yes it's looking for other hardware... like asics. If you are trying to mine with gpu/cpu most lose money doing it at this point. It brings in a tiny amount. And if your trying to mine BTC with GPU/CPU it will not work just can't compete with asics.

Are you trying to mine BTC with a regular computer? Just making sure i understood your post right.

tnx very much for your answer
yes i'm trying to mine with a regular pc (gpu 2gig cpu3.6) but its bitcoin amount dose not matter for me even if it is very tiny i'm just wanna know this processes will possible by a GPU/CPU or i should buy an asics for start mining

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: danialQsk on April 28, 2015, 01:37:21 PM

Quote from: Amph on April 28, 2015, 05:44:21 AM

"it say no external device detected"...

so...have you installed the correct drivers? you need a restart after the installation

yes i was do that by IObit Driver booster
i don't have any other external device
my first Qestion is bit mining just whit a normal computer is possible? or i should use an other hardwares ?
and if it's possible how i can fix this problem

Yes it's looking for other hardware... like asics. If you are trying to mine with gpu/cpu most lose money doing it at this point. It brings in a tiny amount. And if your trying to mine BTC with GPU/CPU it will not work just can't compete with asics.

Are you trying to mine BTC with a regular computer? Just making sure i understood your post right.

danialQsk

newbie

Activity: 4

Merit: 0

Quote from: Amph on April 28, 2015, 05:44:21 AM

"it say no external device detected"...

so...have you installed the correct drivers? you need a restart after the installation

yes i was do that by IObit Driver booster
i don't have any other external device
my first Qestion is bit mining just whit a normal computer is possible? or i should use an other hardwares ?
and if it's possible how i can fix this problem

Amph

legendary

Activity: 3248

Merit: 1070

"it say no external device detected"...

so...have you installed the correct drivers? you need a restart after the installation

danialQsk

newbie

Activity: 4

Merit: 0

Quote from: notlist3d on April 27, 2015, 09:26:08 PM

What device are you trying to use? I could have missed it, but I don't think i see it listed.

Code:


CPU-Z	 
 	 
Binaries	 
CPU-Z version	1.72.0.x32
 	 
Processors	 
Number of processors	1
Number of threads	2
 	 
APICs	 
Processor 0	
     -- Core 0	
         -- Thread 0	0
     -- Core 1	
         -- Thread 0	2
 	 
Timers	 
     ACPI timer	3.580 MHz
     HPET timer	14.318 MHz
     Perf timer	2.116 MHz
     Sys timer	1.000 KHz
 	 
 	 
Processors Information	 
Processor 1	ID = 0
     Number of cores	2 (max 8)
     Number of threads	2 (max 16)
     Name	Intel Celeron N2830
     Codename	Bay Trail-M
     Specification	Intel(R) Celeron(R) CPU N2830 @ 2.16GHz
     Package (platform ID)	(0x3)
     CPUID	6.7.8
     Extended CPUID	6.37
     Core Stepping	C0
     Technology	22 nm
     Tjmax	105.0 °C
     Core Speed	500.0 MHz
     Multiplier x Bus Speed	6.0 x 83.3 MHz
     Stock frequency	2166 MHz
     Instructions sets	MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x
     L1 Data cache	2 x 24 KBytes, 6-way set associative, 64-byte line size
     L1 Instruction cache	2 x 32 KBytes, 8-way set associative, 64-byte line size
     L2 cache	1024 KBytes, 16-way set associative, 64-byte line size
     FID/VID Control	yes
 	 
 	 
     Max non-turbo ratio	26x
     Max turbo ratio	29x
     Ratio 1 core	29x
     Ratio 2 cores	29x
 	 
 	 
 	 
Chipset	 
Northbridge	Intel Bay Trail Host Bridge rev. 0E
Southbridge	Intel Bay Trail LPC Bridge rev. 0E
Memory Type	DDR3
Memory Size	2 GBytes
Memory Frequency	666.7 MHz (1:8)
CAS# latency (CL)	9.0
RAS# to CAS# delay (tRCD)	9
RAS# Precharge (tRP)	9
Cycle Time (tRAS)	24
Command Rate (CR)	1T
 	 
Memory SPD	 
DIMM #	1
     SMBus address	0x50
     Memory type	DDR3
     Module format	SO-DIMM
     Manufacturer (ID)	Hyundai Electronics (AD000000000000000000)
     Size	2048 MBytes
     Max bandwidth	PC3-12800 (800 MHz)
     Part number	HMT325S6EFR8A-PB
     Serial number	0B7F32A3
     Manufacturing date	Week 19/Year 14
     Number of banks	8
     Nominal Voltage	1.35 Volts
     EPP	no
     XMP	no
     AMP	no
JEDEC timings table	CL-tRCD-tRP-tRAS-tRC @ frequency
     JEDEC #1	5.0-5-5-14-19 @ 380 MHz
     JEDEC #2	6.0-6-6-16-22 @ 457 MHz
     JEDEC #3	7.0-7-7-19-26 @ 533 MHz
     JEDEC #4	8.0-8-8-22-30 @ 609 MHz
     JEDEC #5	9.0-9-9-24-33 @ 685 MHz
     JEDEC #6	10.0-10-10-27-37 @ 761 MHz
     JEDEC #7	11.0-11-11-28-39 @ 800 MHz
 	 
 	 
Monitoring	 
Mainboard Model	2213 (0x000000C8 - 0x000020B8)
 	 
LPCIO	 
Hardware Monitors	 
Hardware monitor	ACPI
     Temperature 0	40°C (103°F) [0xC3C] (TZ00)
     Temperature 1	59°C (138°F) [0xCFA] (TZ01)
     Temperature 2	28°C (82°F) [0xBC2] (TZ02)
     Temperature 3	0°C (32°F) [0x0] (PCH)
 	 
Hardware monitor	Battery
     Voltage 0	17.07 Volts [0x42AC] (Current Voltage)
     Capacity 0	41440 mWh [0xA1E0] (Designed Capacity)
     Capacity 1	39472 mWh [0x9A30] (Full Charge Capacity)
     Capacity 2	39472 mWh [0x9A30] (Current Capacity)
     Level 0	5 pc [0x5F] (Wear Level)
     Level 1	100 pc [0x64] (Charge Level)
 	 
 	 
PCI Devices	 
Description	Host Bridge
Location	bus 0 (0x00), device 0 (0x00), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F00
     Revision ID	0x0E
 	 
Description	VGA Controller
Location	bus 0 (0x00), device 2 (0x02), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F31
     Revision ID	0x0E
 	 
Description	Serial ATA Controller
Location	bus 0 (0x00), device 19 (0x13), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F23
     Revision ID	0x0E
 	 
Description	Encryption Device
Location	bus 0 (0x00), device 26 (0x1A), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F18
     Revision ID	0x0E
 	 
Description	Multimedia device
Location	bus 0 (0x00), device 27 (0x1B), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F04
     Revision ID	0x0E
 	 
Description	PCI to PCI Bridge
Location	bus 0 (0x00), device 28 (0x1C), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F48
     Revision ID	0x0E
 	 
Description	PCI to PCI Bridge
Location	bus 0 (0x00), device 28 (0x1C), function 1 (0x01)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F4A
     Revision ID	0x0E
 	 
Description	PCI to PCI Bridge
Location	bus 0 (0x00), device 28 (0x1C), function 2 (0x02)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F4C
     Revision ID	0x0E
 	 
Description	PCI to PCI Bridge
Location	bus 0 (0x00), device 28 (0x1C), function 3 (0x03)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F4E
     Revision ID	0x0E
 	 
Description	USB 2.0 Controller (EHCI)
Location	bus 0 (0x00), device 29 (0x1D), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F34
     Revision ID	0x0E
 	 
Description	PCI to ISA Bridge
Location	bus 0 (0x00), device 31 (0x1F), function 0 (0x00)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F1C
     Revision ID	0x0E
 	 
Description	SMBus Controller
Location	bus 0 (0x00), device 31 (0x1F), function 3 (0x03)
Common header	
     Vendor ID	0x8086
     Model ID	0x0F12
     Revision ID	0x0E
 	 
Description	Network Controller
Location	bus 2 (0x02), device 0 (0x00), function 0 (0x00)
Common header	
     Vendor ID	0x1814
     Model ID	0x3290
     Revision ID	0x00
 	 
Description	BlueTooth
Location	bus 2 (0x02), device 0 (0x00), function 1 (0x01)
Common header	
     Vendor ID	0x1814
     Model ID	0x3298
     Revision ID	0x00
 	 
Description	BaseClass 0xFF, SubClass 0x00, PI 0x00
Location	bus 3 (0x03), device 0 (0x00), function 0 (0x00)
Common header	
     Vendor ID	0x10EC
     Model ID	0x5229
     Revision ID	0x01
 	 
Description	Ethernet Controller
Location	bus 4 (0x04), device 0 (0x00), function 0 (0x00)
Common header	
     Vendor ID	0x10EC
     Model ID	0x8136
     Revision ID	0x07
 	 
 	 
DMI	 
DMI BIOS	
     vendor	Insyde
     version	F.16
     date	04/24/2014
     ROM size	4608 KB
 	 
DMI System Information	
     manufacturer	Hewlett-Packard
     product	HP 15 Notebook PC
     version	0991100000000000000600087
     serial	CND4215X35
     UUID	{3BF7DC08-A8DC-E311-B2A0-F8A9638A535C}
     SKU	J1W69EA#ABV
     family	103C_5335KV G=N L=CON B=HP S=PAV
 	 
DMI Baseboard	
     vendor	Hewlett-Packard
     model	2213
     revision	57.23
     serial	PEGUBF2WV6PTEI
 	 
DMI System Enclosure	
     manufacturer	Hewlett-Packard
     chassis type	Notebook
     chassis serial	Chassis Serial Number
 	 
DMI Processor	
     manufacturer	Intel(R) Corporation
     model	Intel(R) Celeron(R) CPU N2830 @ 2.16GHz
     clock speed	2179.0 MHz
     FSB speed	83.0 MHz
     multiplier	26.5x
 	 
DMI Port Connector	
     designation	J1A2 (internal)
     designation	USB2.0 (external)
     port type	USB
     connector	Access Bus (USB)
 	 
DMI Port Connector	
     designation	J1A2 (internal)
     designation	USB2.0 (external)
     port type	USB
     connector	Access Bus (USB)
 	 
DMI Port Connector	
     designation	J2A2 (internal)
     designation	USB3.0 Port0 (external)
     port type	USB
     connector	Access Bus (USB)
 	 
DMI Port Connector	
     designation	J9D1 (internal)
     designation	UART to Micro USB (external)
     port type	USB
     connector	Access Bus (USB)
 	 
DMI Port Connector	
     designation	CON6A1 (internal)
     designation	SD Card (external)
 	 
DMI Port Connector	
     designation	J9B1 (internal)
     designation	Keyboard (external)
     port type	Keyboard Port
     connector	PS/2
 	 
DMI Port Connector	
     designation	J9B1 (internal)
     designation	Mouse (external)
     port type	Mouse Port
     connector	PS/2
 	 
DMI Port Connector	
     designation	J5A1 (internal)
     designation	Microphone (external)
     port type	Audio Port
     connector	Mini Jack (headphones)
 	 
DMI Port Connector	
     designation	J5A1 (internal)
     designation	Line In (external)
     port type	Audio Port
     connector	Mini Jack (headphones)
 	 
DMI Port Connector	
     designation	J5A1 (internal)
     designation	Line Out (external)
     port type	Audio Port
     connector	Mini Jack (headphones)
 	 
DMI Port Connector	
     designation	J7A1 (internal)
     designation	Audio Jack (external)
     port type	Audio Port
     connector	Mini Jack (headphones)
 	 
DMI Port Connector	
     designation	J2A2 (internal)
     designation	Network Rj45 Jack (external)
     port type	Network Port
     connector	RJ-45
 	 
DMI Port Connector	
     designation	J4J1 (internal)
     designation	SATA (external)
 	 
DMI Port Connector	
     designation	J4E2 (internal)
     designation	SATA Cable (external)
 	 
DMI Port Connector	
     designation	J4A1 (internal)
     designation	VGA (external)
     port type	Video Port
     connector	DB-15 female
 	 
DMI Port Connector	
     designation	J1A1 (internal)
     designation	Display Port (external)
     port type	Video Port
 	 
DMI Port Connector	
     designation	J3A1 (internal)
     designation	Display Port (external)
     port type	Video Port
 	 
DMI Port Connector	
     designation	J9B4 (internal)
     designation	Serial Port (external)
     port type	Serial Port 16550A
     connector	DB-9 male
 	 
DMI Port Connector	
     designation	J2A1 (internal)
     designation	HDMI (external)
 	 
DMI Extension Slot	
     designation	J5C1
     type	A8
     populated	no
 	 
DMI Extension Slot	
     designation	J4B3
     type	A6
     populated	no
 	 
DMI Extension Slot	
     designation	J6C1
     type	A6
     populated	no
 	 
DMI Extension Slot	
     designation	J6D1
     type	A6
     populated	no
 	 
DMI OEM Strings	
     string[0]	$HP$
     string[1]	LOC#
     string[2]	ABS 70/71 78 79 7A 7B
     string[3]	CNB1 0991100000000000000600087
     string[4]	HP_Mute_LED_0_0
     string[5]	String6 for Original Equipment Manufacturer
     string[6]	String7 for Original Equipment Manufacturer
     string[7]	String8 for Original Equipment Manufacturer
     string[8]	String9 for Original Equipment Manufacturer
     string[9]	String10 for Original Equipment Manufacturer
     string[10]	String11 for Original Equipment Manufacturer
 	 
DMI Physical Memory Array	
     location	Motherboard
     usage	System Memory
     correction	None
     max capacity	8192 MBytes
     max# of devices	1
 	 
DMI Memory Device	
     designation	Bottom
     format	SODIMM
     type	unknown
     total width	64 bits
     data width	64 bits
     size	2048 MBytes
 	 
 	 
Graphics	 
Number of adapters	1
 	 
Graphic APIs	 
API	Intel I/O
 	 
Display Adapters	 
Display adapter 0	
     Display name	\\.\DISPLAY1
     Name	Intel(R) HD Graphics
     Board Manufacturer	0x103C (0x2213)
     Memory size	778 MB
     PCI device	bus 0 (0x0), device 2 (0x2), function 0 (0x0)
     Vendor ID	0x8086 (0x103C)
     Model ID	0x0F31 (0x2213)
     Performance Level	0
 	 
Win32_VideoController	AdapterRAM = 0x30AEE800 (816769024)
Win32_VideoController	DriverVersion = 10.18.10.4176
Win32_VideoController	DriverDate = 03/30/2015
 	 
Monitor 0	
     Model	()
     ID	LGD039F
     Serial	
     Manufacturing Date	Week 0, Year 2012
     Size	15.7 inches
     Max Resolution	1366 x 768 @ 59 Hz
     Horizontal Freq. Range	0-0 kHz
     Vertical Freq. Range	0-0 Hz
     Max Pixel Clock	0 MHz
     Gamma Factor	2.2
 	 
 	 
Software	 
Windows Version	Microsoft Windows 7 (6.1) Ultimate Edition 32-bit Service Pack 1 (Build 7601)
DirectX Version	11.0

notlist3d

legendary

Activity: 1456

Merit: 1000

What device are you trying to use? I could have missed it, but I don't think i see it listed.

danialQsk

newbie

Activity: 4

Merit: 0

Hi
Sry if i'm not good in english
fist i was create a bitmenter acount and next make a worker
i was download and install bitminter last version and set my worker user name
but when i run it i have "Probe of port COM1 failed: timeout" Error and my hashrate ghps has stoped on 0.00

(Full problem text : 2015.04.27 [18:27] Connected to BitMinter
2015.04.27 [18:28] Probe of port COM1 failed: timeout
2015.04.27 [18:28] No external devices detected.
2015.04.27 [18:28] BFL drivers: http://www.ftdichip.com/Drivers/VCP.htm ASICMiner and Antminer drivers: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx On Linux load)

how can i fix it
do i need to other external hardwares ?

please help me
special tnx

my mail adress : [email protected]

Topic: COM1 port error Bitminter (Read 1723 times)