I love the mods
Topic: Compac/R1/U3 - Overclock/Mod Showoff Thread (Read 929 times)
These count? I can pull it off the shelf and give it some run time with each heat sink set up.
Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad
Wow that looks cool! Does it perform better than your other stick ? (The stock one)
I haven't pushed it yet but will soon.
Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad
Wow that looks cool! Does it perform better than your other stick ? (The stock one)
Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad
Since posting mods and overclock results is diverts most threads I thought I would start one. Please use the following rules on this thread:
1- Post Mods and Overclock results for the Compact/R1/U3 only. Will modify as new small miners are released.
2- For overclock results, please include pertinent info like Freq. and cooling method.
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.
Thanks
1- Post Mods and Overclock results for the Compact/R1/U3 only. Will modify as new small miners are released.
2- For overclock results, please include pertinent info like Freq. and cooling method.
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.
Thanks
Do you mean a compac from sidehack.
yes - damn spell check--
Since posting mods and overclock results is diverts most threads I thought I would start one. Please use the following rules on this thread:
1- Post Mods and Overclock results for the Compact/R1/U3 only. Will modify as new small miners are released.
2- For overclock results, please include pertinent info like Freq. and cooling method.
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.
Thanks
1- Post Mods and Overclock results for the Compact/R1/U3 only. Will modify as new small miners are released.
2- For overclock results, please include pertinent info like Freq. and cooling method.
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.
Thanks
Do you mean a compac from sidehack.
Here is an overclock of a GekkoScience Compac;
Freq- 435
Cooling - Stock
Bfgminer 5.4.1 on a Raspi
Freq- 435
Cooling - Stock
Bfgminer 5.4.1 on a Raspi
Since posting mods and overclock results tends to divert most threads I thought I would start one. Please use the following rules on this thread:
1- Post Mods and Overclock results for the Compac/R1/U3 only. Will modify as new small miners are released.
2- For overclock results, please include pertinent info as shown below:
- Freq-
- Cooling;
- Software
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.
Thanks
1- Post Mods and Overclock results for the Compac/R1/U3 only. Will modify as new small miners are released.
2- For overclock results, please include pertinent info as shown below:
- Freq-
- Cooling;
- Software
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.
Thanks
Jump to: