Topic: [Complete] Remote Rig Optimization, ***Thanks Deslok! (Read 929 times)

Thanks mb300sd,  I'm hoping for 370mh/s on mine.  I'm going to put your advice to good use in the next few days,  and a few tricks I picked up from Deslok.  You guys rock!

300SD, as you can guess from the name.

Have you enabled unofficial overclocking in afterburner?
http://www.overclock.net/amd-ati/641299-guide-enabling-unofficial-overclocking-msi-afterburner.html

Mine won't let me underclock the ram to 333 unless I open it, drag RAM to ~600 and core to 940, close AB, and reopen it and set RAM to 333.

Try 940/333 with phoenix + phatk 2.2, thats what I'm using for 390 on the 5850.

I bet you thats me!    I have a 300d and a 240d!    How about yourself?  sd's are nice rides!


I'm not looking for overclocking help specifically,  but thats part of it.  I don't have the time I need to tinker. I only get a few hours a week to maintain my rigs and it breaks my heart to be running inefficiently.   Your getting 390 on a 5850 I'm getting something crazy like 40% less Mh/s out of mine.  The tools I'm using just seem weak.  (afterburner?)

Check your Pm's

Are you looking for overclocking help? I have a 5850 getting 390 MHash with a mild overclock, running 69-70 degC. Be happy to help.

PS- same svojoe as on several car forums?

****EDIT****

You guys are great!

Extra thanks to Deslok and mb300sd,  

I've only had time to tweak one system, but with Deslok's Help I was able to get 210 Mh/s Additional performance out of only 3 5830's.  And it seems there is still headroom to be tapped.  





******************************************************


I have 3 main rigs.   Each contain 3 or 4 gpus (5830/5850/6950/5770).  Over the next two days I am going to fabricate a open frame station for these three machines.  After I get the new setup dialed in I would like see about getting some help Optimizing.

Here is why,  I believe due to various issues I am running well below my potential Mh/s.   Here is what I am averaging.

5830,  235 Mh/s
5850,  285 Mh/s
6950,  335 Mh/s
5770,  205 Mh/s


These numbers seem well below the 'average' speed posted on the hardware comp.   And well below what most other people are getting.  I have the machines setup for remote access via LogMeIn on a fast internet connection.  I would prefer to be physically present to help with restarts etc.   They are all Win7 Ultimate OS.

I suspect that I am missing out on a lot of hash because of driver conflicts, lack of updates and low skill level with

I would prefer to pay in Bitcoins.  And would look at a little over a week before I would be ready for you.

Reply here or send me a PM about what you think, any questions and your rate.