The drivers worked. Took a few goes to find a floppy that I could write the files to (part of the install), but it picked up the two FC HBAs no problem and then spotted the RAID array on the restart.
The files I was looking for from 1996/97 were not there, so they're obviously gone from another computer years ago (shame).
Topic: [Completed] Device drivers - old and hard to find - BTC bounty (Read 922 times)
Thanks guys - I will test tomorrow. Stupid HP site didn't get me to those locations this time around.
From what they say here: http://www.ds10.com/FPL/HW/STOR/CONTROLLERS/120186-B21/windows.html
This will do the trick:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316587&prodNameId=316589&swEnvOID=181&swLang=8&mode=2&taskId=135&swItem=MTX-UNITY-I10559
or this:
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=254910&prodNameId=257747&swEnvOID=24&swLang=8&mode=2&taskId=135&swItem=MTX-UNITY-I10558
This will do the trick:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316587&prodNameId=316589&swEnvOID=181&swLang=8&mode=2&taskId=135&swItem=MTX-UNITY-I10559
or this:
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=254910&prodNameId=257747&swEnvOID=24&swLang=8&mode=2&taskId=135&swItem=MTX-UNITY-I10558
I am in need of a device driver for an older piece of equipment, and having spent quite a lot of time on this, have decided to offer a BTC bounty for a valid/working version. Not making it easier is the fact there are two OS's that are acceptable and two similar cards.
OS: XP or W2k (if you come up with Win95, Win98, Win server 2k3 that would be ok but less desirable - Win98 would be the preference from those.)
Device part number:
161290-001 also know as 120186-B21 or
005106-001
These are Compaq fibre channel (FC) host bus adaptors (HBA) for PCI running 66MHz. They are used to connect from either a dual xeon III server (PowerEdge2650) or a PE2550 (dual P3) to a SCSI external raid array. It happens that there is some information on the RAID array that I think is there and useful. Various rebuilds over the years and my original versions are not available.
Minimum bounty is 2BTC (not knowing what is a fair sum).
OS: XP or W2k (if you come up with Win95, Win98, Win server 2k3 that would be ok but less desirable - Win98 would be the preference from those.)
Device part number:
161290-001 also know as 120186-B21 or
005106-001
These are Compaq fibre channel (FC) host bus adaptors (HBA) for PCI running 66MHz. They are used to connect from either a dual xeon III server (PowerEdge2650) or a PE2550 (dual P3) to a SCSI external raid array. It happens that there is some information on the RAID array that I think is there and useful. Various rebuilds over the years and my original versions are not available.
Minimum bounty is 2BTC (not knowing what is a fair sum).
Jump to: