Topic: Computer Crashed Hard - Best / Easisest way to reset Antminer S1 Passwords (Read 1402 times)
October 26, 2014, 07:50:54 PM
with the s1 powered on, push and hold the reset button. wait for the lights on the ethernet port etc to flash and few other lights to change, probably about 15 seconds. after that wait a few more just to be sure. power off s1. power on s1, check with router to see that it sees it at 192.168.1.99 and you are good to go.
October 26, 2014, 01:06:14 PM
Help a brother out!
Instead of plugging possible pass combos and hoping there has to be a neater way to do this.
thanks all
Instead of plugging possible pass combos and hoping there has to be a neater way to do this.
thanks all
The easiest way to reset the password is to use the small reset button on the Antminer S1 controller board. This will reset all of the settings and its IP address back to defaults.
For detailed instructions, Doggie has a guide here in the forum on the Antminer S1. I don't have the link handy but a quick search will find it.
October 26, 2014, 12:47:24 PM
Help a brother out!
Instead of plugging possible pass combos and hoping there has to be a neater way to do this.
thanks all
Instead of plugging possible pass combos and hoping there has to be a neater way to do this.
thanks all
Jump to: