I have adjusted them, I pushed the memory and processor to max before artifacts would appear. That gave me a bit more- but it seems to max out at 550 and seems to just want to chug along at 48-500.
It's sitting in a PCI-E x16 2.0 slot on a 3.0 C2D system (I had it laying around).
It's a HIS card, do you guys think that's what the performance is due to- would I have better luck with a MSI, ASUS, or other better brand?
Topic: Config help (Read 431 times)
Have you adjusted the GPU Engine/Memory clocks? I would recommend using cgminer rather than guiminer, as it will allow you to adjust these.
Ok, so I'm not a total noob- but still relatively.
I initially setup a 7850 rig and am getting ~350mh/s out of it and am happy with that (unless I shouldn't be). His weekend I setup a 1x 7950 rig (these are two separate pc's) and am only getting ~485 mh/s where I think I should be getting 550-600.
I'm using guiminer with flags set -v -w256
Any tips on what else I can do?
PS- I was using 50btc, but got tired of their site being down half of the time I went there. Using btcguild now.
Thanks for the help!
I initially setup a 7850 rig and am getting ~350mh/s out of it and am happy with that (unless I shouldn't be). His weekend I setup a 1x 7950 rig (these are two separate pc's) and am only getting ~485 mh/s where I think I should be getting 550-600.
I'm using guiminer with flags set -v -w256
Any tips on what else I can do?
PS- I was using 50btc, but got tired of their site being down half of the time I went there. Using btcguild now.
Thanks for the help!
Jump to: