that spreadsheet is big but very outdated
out of 20+ 780 and 780Ti only a few are sub 500kh/s
also, sorry if I confused, the 840-900kh/s settings is with -H 1, I get that 200kh/s if I enable -H 1 over -H 0
Topic: [Configuration & Hashrate] GeForce GTX 780 / 780 Ti Thread (Read 3331 times)
Not sure if it has been started before or is hiding somewhere.
If you are interested in participating or sharing info please do.
Which 780/780Ti do you have- Manufacturer & Version
Your hashrate
Your core clock / memory clock / +mV increase / bios version / temps / air or water cooled
What settings do you use for Cudaminer
How much power is drawn from your card / system
eVGA 780TI KPE
840-900kh/s
1253mhz core / 1750mhz memory / +0mV increase(bios already increases) / skyn3t bios / 40C / watercooled
cudaminer -H 1 -i 0 -m 1 -l T15x24 -o stratum+tcp://pool:port -u user -p pass
~300w from the card ~450w from system ~550w if -H 1 is enabled over -H 0 ( also an increase of 200khs )
there are some spreadsheets on cudaminer thread accessible from the OP...If you are interested in participating or sharing info please do.
Which 780/780Ti do you have- Manufacturer & Version
Your hashrate
Your core clock / memory clock / +mV increase / bios version / temps / air or water cooled
What settings do you use for Cudaminer
How much power is drawn from your card / system
eVGA 780TI KPE
840-900kh/s
1253mhz core / 1750mhz memory / +0mV increase(bios already increases) / skyn3t bios / 40C / watercooled
cudaminer -H 1 -i 0 -m 1 -l T15x24 -o stratum+tcp://pool:port -u user -p pass
~300w from the card ~450w from system ~550w if -H 1 is enabled over -H 0 ( also an increase of 200khs )
when you say H0 an increase of 200khs, do you mean you do 1100khs ?
Not sure if it has been started before or is hiding somewhere.
If you are interested in participating or sharing info please do.
Which 780/780Ti do you have- Manufacturer & Version
Your hashrate
Your core clock / memory clock / +mV increase / bios version / temps / air or water cooled
What settings do you use for Cudaminer
How much power is drawn from your card / system
eVGA 780TI KPE
840-900kh/s
1253mhz core / 1750mhz memory / +0mV increase(bios already increases) / skyn3t bios / 40C / watercooled
cudaminer -H 1 -i 0 -m 1 -l T15x24 -o stratum+tcp://pool:port -u user -p pass
~300w from the card ~450w from system ~550w if -H 1 is enabled over -H 0 ( also an increase of 200khs )
If you are interested in participating or sharing info please do.
Which 780/780Ti do you have- Manufacturer & Version
Your hashrate
Your core clock / memory clock / +mV increase / bios version / temps / air or water cooled
What settings do you use for Cudaminer
How much power is drawn from your card / system
eVGA 780TI KPE
840-900kh/s
1253mhz core / 1750mhz memory / +0mV increase(bios already increases) / skyn3t bios / 40C / watercooled
cudaminer -H 1 -i 0 -m 1 -l T15x24 -o stratum+tcp://pool:port -u user -p pass
~300w from the card ~450w from system ~550w if -H 1 is enabled over -H 0 ( also an increase of 200khs )
Jump to: