Author

Topic: confused on why some miners are so expensive. (Read 1325 times)

legendary
Activity: 1456
Merit: 1000
September 07, 2014, 05:22:03 PM
#16
One of the biggest costs is the ASIC chips them-self.  With being a smaller miner you will need to do a little research and pick best for your money.

Some of this decision is really based on your electricity.  If the efficient will make a difference.
legendary
Activity: 1120
Merit: 1000
September 07, 2014, 04:35:57 PM
#15
Because you are not a mining whale that will buy thousand of them.

For big buyers, the prices are way cheaper, for the small ones, they charge expensive because people still buy them expensive.
legendary
Activity: 1134
Merit: 1002
September 07, 2014, 12:37:31 PM
#14
Demand is high,production cost is higher as difficulty rises.

IMO, the mining difficulty only affects how much bitcoin you can get from the miner, but not the production cost of the miner.
sr. member
Activity: 280
Merit: 250
September 07, 2014, 05:49:57 AM
#13
Mining Fund is very expensive in because the price of mining equipment is very expensive, it impacts on the high price of a miner, an example can be seen in such cloudmining PBmining.com or CEX.IO, before investing in cloudmining, which must first be understood is cloudming investment is an investment that has a high risk, could succeed or could also fail, though successful, can be managed with little benefit.
The couple of things that caused the miner very expensive, hopefully You can invest in a safe and profitable ...  Tongue
member
Activity: 92
Merit: 10
September 07, 2014, 05:00:27 AM
#12
So I'm really new but I'm looking at let's say antminer S3 okay and then let's say a teraminer like an S2 (OR ANY TERAMINER)
Would or should I save my money for a teraminer ($1300-$1800)
So no here is the thing. S3 is about half a bitcoins and your required to buy in pairs so 1bitcoin for 2(I'm rounding down) so at this day about $500-$540 for 2 S3
so
456*2=912gh for 2s3
1tera=1000gh


It seems cheaper to buy the 2s3 (maybe more ) as to the teraminer right?

Or is my math wrong?


Demand is high,production cost is higher as difficulty rises.
newbie
Activity: 6
Merit: 0
September 07, 2014, 04:44:39 AM
#11
New Ants are better than Terras in general, but it depends how you get them.

Are you talking about S3 or S4 ants ? Are S4 even anounced ?

S3. There are rumours only for S4.
full member
Activity: 434
Merit: 101
https://www.payaccept.net/
September 07, 2014, 04:33:43 AM
#10
New Ants are better than Terras in general, but it depends how you get them.

Are you talking about S3 or S4 ants ? Are S4 even anounced ?
newbie
Activity: 6
Merit: 0
September 07, 2014, 03:58:30 AM
#9
New Ants are better than Terras in general, but it depends how you get them.
full member
Activity: 434
Merit: 101
https://www.payaccept.net/
September 07, 2014, 12:39:06 AM
#8
Ants has also very J per GH/s ratio, if you are paying something for electricity, it is worth to consider it. And even if you do not, they will run cooler, than other units with worse j/GH/s ratio.
legendary
Activity: 1456
Merit: 1000
September 06, 2014, 12:23:23 PM
#7
One thing is shipping.  I know on the 1.5 Dragon it is a beast on shipping. 

With S3 it has no psu's and lighter can ship much cheaper.
member
Activity: 70
Merit: 10
September 06, 2014, 07:43:45 AM
#6
Because thats how they do it, just like CPUs with higher processing power, you pay a lot more for a little bit extra.
hero member
Activity: 653
Merit: 500
September 05, 2014, 02:38:38 PM
#5
So I'm really new but I'm looking at let's say antminer S3 okay and then let's say a teraminer like an S2 (OR ANY TERAMINER)
Would or should I save my money for a teraminer ($1300-$1800)
So no here is the thing. S3 is about half a bitcoins and your required to buy in pairs so 1bitcoin for 2(I'm rounding down) so at this day about $500-$540 for 2 S3
so
456*2=912gh for 2s3
1tera=1000gh


It seems cheaper to buy the 2s3 (maybe more ) as to the teraminer right?

Or is my math wrong?

What about buying 10 ASICMiner Tube? https://bitcointalksearch.org/topic/block-erupter-tube-sales-information-thread-round4-price-at-1btc-per-ths-735728
You can get 8-8.5 TH/s for 7.9 btc, and the power consumption is about 0.9 J per GH/s.
sr. member
Activity: 434
Merit: 250
September 05, 2014, 08:03:17 AM
#4
So I'm really new but I'm looking at let's say antminer S3 okay and then let's say a teraminer like an S2 (OR ANY TERAMINER)
Would or should I save my money for a teraminer ($1300-$1800)
So no here is the thing. S3 is about half a bitcoins and your required to buy in pairs so 1bitcoin for 2(I'm rounding down) so at this day about $500-$540 for 2 S3
so
456*2=912gh for 2s3
1tera=1000gh


It seems cheaper to buy the 2s3 (maybe more ) as to the teraminer right?

Or is my math wrong?


They are totally different companies and they set their prices themselves and maybe they manufacturing costs them more or they only want more profit, who knows.
full member
Activity: 434
Merit: 101
https://www.payaccept.net/
September 05, 2014, 12:22:41 AM
#3
most teraminers do not need aditional psu's like ants do, that is additional price, but seems like ants is best bang for the buck.
DrG
legendary
Activity: 2086
Merit: 1035
September 05, 2014, 12:15:19 AM
#2
S3 uses new chips compared to the S2 (both from the same company Bitmain).

S2 was geared more for data centers and the S3 was more for home users.

The newer version of the S2 which was expected to be called the S4 should be coming out soon using the same chips on the S3.
newbie
Activity: 51
Merit: 0
September 04, 2014, 10:46:46 PM
#1
So I'm really new but I'm looking at let's say antminer S3 okay and then let's say a teraminer like an S2 (OR ANY TERAMINER)
Would or should I save my money for a teraminer ($1300-$1800)
So no here is the thing. S3 is about half a bitcoins and your required to buy in pairs so 1bitcoin for 2(I'm rounding down) so at this day about $500-$540 for 2 S3
so
456*2=912gh for 2s3
1tera=1000gh


It seems cheaper to buy the 2s3 (maybe more ) as to the teraminer right?

Or is my math wrong?

Jump to: