Author

Topic: CryptoNight n70 + bitmain 1600w (Read 249 times)

hero member
Activity: 1498
Merit: 597
September 28, 2018, 09:32:45 PM
#6
hey guys i have a bitmain 1600w power supply, it arrived with a 10amp chinese outlet, i plugged it in with a typical 10amp usa outlet into a 110. doesn't seem to be powering up. would it be a faulty power supply or will it only start with two n70s plugged in? im running in on 110v outlet

G1114b
https://www.newegg.com/Product/Product.aspx?Item=9SIAC5F6UM3124&ignorebbr=1

this is the one i have, i have tried a few different coords so it must need atleast 200w  Lips sealed

- thats not a Bitmain Power Supply at all Smiley

- Its a Huh? Eyoyo Brand Huh?


Very confusing item description on newegg Smiley

platinum conversion rate 1600W mining power supply,
real full 1600W (1800W Max) power supply,
maximum power only 1200W if 110V main power,
Input Rated Voltage:AC200~240V

Descriptions:
Input Characteristic
Voltage Range: AC 176~264 V
Input Rated Voltage: AC 200~240 V
Starting Inrush Current: =80 A
Maximum Input Current: =10 A
Efficiency: =92%
full member
Activity: 538
Merit: 175
September 28, 2018, 04:15:01 PM
#5
https://www.newegg.com/Product/Product.aspx?Item=9SIAC5F6UM3124&ignorebbr=1

this is the one i have, i have tried a few different coords so it must need atleast 200w  Lips sealed
Yes, you can see in the description that:

Voltage Range: AC 176~264 V
newbie
Activity: 154
Merit: 0
September 28, 2018, 04:00:08 PM
#4
G1114b

https://www.newegg.com/Product/Product.aspx?Item=9SIAC5F6UM3124&ignorebbr=1

this is the one i have, i have tried a few different coords so it must need atleast 200w  Lips sealed


What is the model number of the power supply?

The APW3+-12-1600 will only start at voltages above 205 volts

The APW3++ will start at voltages between 95-105 volts but the rated power on 110v is only 1200 watts
 



legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
September 28, 2018, 08:52:57 AM
#3
yeah maybe you don't have the correct  bitmain psu to run on 110 volt

this one is the one that works with 110-240 volts

https://www.amazon.com/AntMiner-Power-Supply-1200W-Connectors/dp/B076CM9F7Q/ref=sr_1_5?


you mention n70 plugged into it  what is an n70


is it this?
http://www.baikalminer.com/product15.php

if it is these pull only 220 watts

you should be able to run 2 on the correct psu

if you need a different  psu  here is a link

https://www.corsair.com/us/en/Categories/Products/Certified-Refurbished/Power-Supplies/RMx-Series%E2%84%A2-RM1000x-%E2%80%94-1000-Watt-80-PLUS%C2%AE-Gold-Certified-Fully-Modular-PSU-%28NA%29-%28Refurbished%29/p/CP-9020094-NA/RF
member
Activity: 113
Merit: 31
September 28, 2018, 06:50:18 AM
#2
What is the model number of the power supply?

The APW3+-12-1600 will only start at voltages above 205 volts

The APW3++ will start at voltages between 95-105 volts but the rated power on 110v is only 1200 watts
 


newbie
Activity: 154
Merit: 0
September 28, 2018, 05:53:27 AM
#1
hey guys i have a bitmain 1600w power supply, it arrived with a 10amp chinese outlet, i plugged it in with a typical 10amp usa outlet into a 110. doesn't seem to be powering up. would it be a faulty power supply or will it only start with two n70s plugged in? im running in on 110v outlet
Jump to: