Thank you so much, I did not know that work this way.
Thank you
Topic: Cuda error in cudaprogram.cu:388 (Read 140 times)
I have 4 gigabytes of DDR4, Should be enough RAM for the Asus prime Z390-P, if I want to run7 graphic cards?
Currently, I have 5 3070 and 2 1660 super.
My disc is SSD 250 ,more than empty besides Windows
How should I config that memory in my case?
Currently, I have 5 3070 and 2 1660 super.
My disc is SSD 250 ,more than empty besides Windows
How should I config that memory in my case?
Based on your setup:
5 x 3070's each with 8GB = 40GB
2 x 1660's each with 6GB = 12GB
So a total of 52GB Minimum... So enter 52000 at the minimum...
I have 4 gigabytes of DDR4, Should be enough RAM for the Asus prime Z390-P, if I want to run7 graphic cards?
Currently, I have 5 3070 and 2 1660 super.
My disc is SSD 250 ,more than empty besides Windows
How should I config that memory in my case?
Currently, I have 5 3070 and 2 1660 super.
My disc is SSD 250 ,more than empty besides Windows
How should I config that memory in my case?
Yes the virtual memory.
DO NOT SET TO NO PAGING FILE!
You should have at least the same amount allocated as you have in your graphics cards.
If you have 2 x 8GB cards make sure that you have at least 16GB allocated on your disk to keep things happy!
DO NOT SET TO NO PAGING FILE!
You should have at least the same amount allocated as you have in your graphics cards.
If you have 2 x 8GB cards make sure that you have at least 16GB allocated on your disk to keep things happy!
Hi, thanks for the reply,
I belive your talking about virtual memory?
Should I put "no paging file" in the options menu or just a crazy number like 200.000?
If you say that might be the problem I will try again that way.
Thank you
I belive your talking about virtual memory?
Should I put "no paging file" in the options menu or just a crazy number like 200.000?
If you say that might be the problem I will try again that way.
Thank you
Hi, thanks for the help first of all;
I am just new on this, asking for help for the error: https://ibb.co/bHKDdgL
I have windows 10, Nvidia version is 461.40, Cuda drivers, and my config are just two 1660 Super.
For some reason, I get only this problem when I have the two of them connected. I took one away and it's not happening anymore, mines perfectly then but just one.
I taught could be the graphic card but I tested all of them separately and work perfectly.
I also tried to add my config to a rig with 5 3070 as the last one and also the same error, Out of memory.
Any ideas of what could be?
Thank you again
I am just new on this, asking for help for the error: https://ibb.co/bHKDdgL
I have windows 10, Nvidia version is 461.40, Cuda drivers, and my config are just two 1660 Super.
For some reason, I get only this problem when I have the two of them connected. I took one away and it's not happening anymore, mines perfectly then but just one.
I taught could be the graphic card but I tested all of them separately and work perfectly.
I also tried to add my config to a rig with 5 3070 as the last one and also the same error, Out of memory.
Any ideas of what could be?
Thank you again
Add more disk space to your page file.
Hi, thanks for the help first of all;
I am just new on this, asking for help for the error: https://ibb.co/bHKDdgL
I have windows 10, Nvidia version is 461.40, Cuda drivers, and my config are just two 1660 Super.
For some reason, I get only this problem when I have the two of them connected. I took one away and it's not happening anymore, mines perfectly then but just one.
I taught could be the graphic card but I tested all of them separately and work perfectly.
I also tried to add my config to a rig with 5 3070 as the last one and also the same error, Out of memory.
Any ideas of what could be?
Thank you again
I am just new on this, asking for help for the error: https://ibb.co/bHKDdgL
I have windows 10, Nvidia version is 461.40, Cuda drivers, and my config are just two 1660 Super.
For some reason, I get only this problem when I have the two of them connected. I took one away and it's not happening anymore, mines perfectly then but just one.
I taught could be the graphic card but I tested all of them separately and work perfectly.
I also tried to add my config to a rig with 5 3070 as the last one and also the same error, Out of memory.
Any ideas of what could be?
Thank you again
Jump to: