Cudaminer Alt-Coin GeForce GTX 570m Crash

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: dentainferno on May 21, 2015, 07:33:30 PM

I am having an issue like this. I have downloaded CUDA drivers from the cuda network install wizard from the site, I have also installed new drivers from the Device manager and I am again trying to get them from Geforce.com for my Geforce GTX 860m. This is my log.

C:\Miners\cudaminer\cudaminer x86>cudaminer.exe -o stratum+tcp://us.litecoinpool
.org:3333 -O dentainferno.860m:** --no-autotune
*** CudaMiner for nVidia GPUs by Christian Buchner ***
This is version 2014-02-07 (beta)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013,2014 Christian Buchner
LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2015-05-21 20:10:28] 1 miner threads started, using 'scrypt' algorithm.
[2015-05-21 20:10:28] Starting Stratum on stratum+tcp://us.litecoinpool.org:3333

[2015-05-21 20:10:29] Stratum detected new block
[2015-05-21 20:10:31] GPU #0: GeForce GTX 860M with compute capability 5.0

C:\Miners\cudaminer\cudaminer x86>pause
Press any key to continue . . .

Welcome to the forum. You will have better luck over in the altcoin forum.

Before doing a lot of mining I highly suggest doing some ROI math. Sadly for most the day's of GPU mining are gone. Most will run at a loss just running. And as far as day's of ROI'ing on a GPU they are far gone.

dentainferno

newbie

Activity: 1

Merit: 0

I am having an issue like this. I have downloaded CUDA drivers from the cuda network install wizard from the site, I have also installed new drivers from the Device manager and I am again trying to get them from Geforce.com for my Geforce GTX 860m. This is my log.

C:\Miners\cudaminer\cudaminer x86>cudaminer.exe -o stratum+tcp://us.litecoinpool
.org:3333 -O dentainferno.860m:** --no-autotune
*** CudaMiner for nVidia GPUs by Christian Buchner ***
This is version 2014-02-07 (beta)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013,2014 Christian Buchner
LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2015-05-21 20:10:28] 1 miner threads started, using 'scrypt' algorithm.
[2015-05-21 20:10:28] Starting Stratum on stratum+tcp://us.litecoinpool.org:3333

[2015-05-21 20:10:29] Stratum detected new block
[2015-05-21 20:10:31] GPU #0: GeForce GTX 860M with compute capability 5.0

C:\Miners\cudaminer\cudaminer x86>pause
Press any key to continue . . .

Greg121986

newbie

Activity: 8

Merit: 0

Do you have the latest nvidia drivers and the latest version of cudaminer installed? You might try to remove all flags and see if it will run. With the latest version of cudaminer, my GTX 760 will crash after its first autotune. Then I just re-run it and it works OK.

FreePls

full member

Activity: 238

Merit: 100

what miner + the extra tags are the best for a gtx 580? ( currently SLI connected )

base20

newbie

Activity: 40

Merit: 0

I do use cudaminer myself not sure if i can offer any help tho. I'm guessing you changed the info to generic stuff for posting purposes? Otherwise you need to input the actual site/username etc.

Looking at my setup it starts the same as yours but I just use auto-tuning so I don't use any flags in the config file. Have you tried not using any flags and just letting it auto-tune?

AstronAUT

newbie

Activity: 1

Merit: 0

Hi there,

I am new to mining and I was trying to set up a miner for myself for quite some time. But I have not got any of them working so far. I read some forum posts and then tried to use cudaminer, because of my GPU. But as I already suspected: It didn´t work as well.

When I start the miner, it shows:

Code:

1 miner threads started, using `scrypt´ algorithm.
Binding thread 0 to cpu 0
Long-polling activated for http://MININGPOOL:PORT/LP
GPU #0: starting up...
GPU #0: with compute capability 0.0
GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0

And after that cudaminer.exe crashes - without performing an autotuning or something else

Here is my current cudaminer-configuration for the 2013-10-10 (Using that version, because otherwise he can´t even load the GPU-driver):

Code:

cudaminer.exe -i 1 -l auto -C 0 -H 0 -d 0 -o MININGPOOL:PORT -O MYUSERNAME.1:x

GPU: GeForce GTX 570m
System: Win7 x64

I´ve also tried nearly every other flag configuration but the miner keeps crashing at the same point.
Please help me. Can´t help myself anymore. Huh

Topic: Cudaminer Alt-Coin GeForce GTX 570m Crash (Read 1513 times)