D3 flashing TO L3, L3 BOARD INSIDE D3

dbs00

member

Activity: 92

Merit: 10

so its not doable to flash a d3 with l3 firmware?
anyone tried it?

sxemini

member

Activity: 1558

Merit: 69

Quote from: DaveF on February 07, 2020, 10:45:39 AM

Quote from: sxemini on February 07, 2020, 10:22:46 AM

Quote from: DaveF on February 07, 2020, 09:31:58 AM

According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3

https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C

So all you would need to do is flash the firmware you need.
You may or may not need to use the SD card method depending on the revision of the firmware that is already on it.
There are guides on the Bitmain site.

-Dave

oh dude oh dude XD

Yes this boards have the same Controller board and thats it.
The asic boards are different. Because ASIC, the name say it XD

So no you can´t make an D3 to a L3.

You are correct. I misread it. I was thinking he was asking about swapping a dead control board for a good one between units.
Something I have had to do a lot on Bitmain gear Sad

This is what happens when you read & post on mobile while standing on a train.

-Dave

yes thats true

DaveF

legendary

Activity: 3500

Merit: 6320

Crypto Swap Exchange

Quote from: sxemini on February 07, 2020, 10:22:46 AM

Quote from: DaveF on February 07, 2020, 09:31:58 AM

According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3

https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C

So all you would need to do is flash the firmware you need.
You may or may not need to use the SD card method depending on the revision of the firmware that is already on it.
There are guides on the Bitmain site.

-Dave

oh dude oh dude XD

Yes this boards have the same Controller board and thats it.
The asic boards are different. Because ASIC, the name say it XD

So no you can´t make an D3 to a L3.

You are correct. I misread it. I was thinking he was asking about swapping a dead control board for a good one between units.
Something I have had to do a lot on Bitmain gear Sad

This is what happens when you read & post on mobile while standing on a train.

-Dave

sxemini

member

Activity: 1558

Merit: 69

Quote from: DaveF on February 07, 2020, 09:31:58 AM

According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3

https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C

So all you would need to do is flash the firmware you need.
You may or may not need to use the SD card method depending on the revision of the firmware that is already on it.
There are guides on the Bitmain site.

-Dave

oh dude oh dude XD

Yes this boards have the same Controller board and thats it.
The asic boards are different. Because ASIC, the name say it XD

So no you can´t make an D3 to a L3.

DaveF

legendary

Activity: 3500

Merit: 6320

Crypto Swap Exchange

According to Bitmain yes it's the same board for the L3,L3+,L3++,D3,A3,X3

https://shop.bitmain.com/product/detail?pid=000201807311735163200cr1JTsS068C

So all you would need to do is flash the firmware you need.
You may or may not need to use the SD card method depending on the revision of the firmware that is already on it.
There are guides on the Bitmain site.

-Dave

blknminerz

newbie

Activity: 2

Merit: 0

Hi guys,
I don't know if you noticed that there is an L3 board inside thf D3 but I just noticed it.
IS IT POSSIBLE TO FLASH A D3 Into an L3?
Does anybody try it?

I'll out right now

Topic: D3 flashing TO L3, L3 BOARD INSIDE D3 (Read 224 times)