Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 46.

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: ilmaz on October 19, 2018, 08:49:29 AM

Quote from: mattaero on October 19, 2018, 07:41:00 AM

Quote from: ilmaz on October 19, 2018, 02:23:50 AM

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell

hi all sorry for mistake to reply
streenip hi mattaero i am new according by you say you earn 5~7$ for each z9mini on nice hash but i calcute this miner profibility on nice hash and it is 3.94$ what is the matter? have you another way to mine by this miner?
thank you

I flashed them all with the batch 1 bios and put most of them at 750 mhz and get 16.5k sols ish. One I only get 700 mhz and a couple are at 650, but I average about 15.5k sols total per miner. I have been using prohashing lately which I have actually had better success with (which surprised me), and the Z9's don't appear to work with nicehash properly.

its imazing can you explain me what do you do exactily about "prohash" and also can be used this stracture for a9 zmaster?
thanks for your information
[/quote]

Just go here: https://prohashing.com/ and follow the instructions. You will use the "a=equihash" password argument. I have no idea if this would be better for the A9 Zmaster or not. I just know that the z9 mini does not work with nicehash correctly (30% rejected shares for me). I did also have some OK success with Miningpoolhub, but prohashing seems to have been better for me. Results vary depending on the day and value of the equihash coins mined...

ilmaz

newbie

Activity: 13

Merit: 0

Quote from: mattaero on October 19, 2018, 07:41:00 AM

Quote from: ilmaz on October 19, 2018, 02:23:50 AM

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell

hi all sorry for mistake to reply
streenip hi mattaero i am new according by you say you earn 5~7$ for each z9mini on nice hash but i calcute this miner profibility on nice hash and it is 3.94$ what is the matter? have you another way to mine by this miner?
thank you

I flashed them all with the batch 1 bios and put most of them at 750 mhz and get 16.5k sols ish. One I only get 700 mhz and a couple are at 650, but I average about 15.5k sols total per miner. I have been using prohashing lately which I have actually had better success with (which surprised me), and the Z9's don't appear to work with nicehash properly.
[/quote]
its imazing can you explain me what do you do exactily about "prohash" and also can be used this stracture for a9 zmaster?
thanks for your information

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: Tarlatata on October 19, 2018, 08:18:15 AM

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

I got my Zig Z1 from here: https://leiqing.en.alibaba.com/?spm=a2700.8443308.0.0.36803e5fGjkX2d

It was pretty fast shipping (4 days), pretty fast response times and they will work with you on customs forms. Also they are VERY good at trying to help with issues... (they aren't the manufacturer, but they will try to help)

grenwolde

newbie

Activity: 22

Merit: 0

Quote from: divseb on October 19, 2018, 05:05:51 AM

Hello,

I need your help, i have buying a zig z1 and after lot difficulty to doing boot the miner i have finally started it and let mine for 12 hours, after that, i have moved miner on another place and now i can't setting again, i don't understand why, all setting don't save, it return always on factory set and so i can't launch the miner.

Have you an idea where is the problem, i have burn the key again, reset miner and router, but always the same thing, impossible to save setting.

Thx for your help.

what are your settings? have you set starting freq to 800 or 850 -- i would start at 800 and work your way up

Tarlatata

jr. member

Activity: 102

Merit: 2

Quote from: mattaero on October 19, 2018, 07:49:25 AM

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

Mind telling me where you go it from and price? Local retailers is charging a stupid premium (around 6200 usd) making it a no go choice for something not even in stock.

mattaero

jr. member

Activity: 178

Merit: 2

Also, I wanted to confirm what was mentioned earlier in the forum. Setting the frequency to 1000 and the "auto-frequent" to "1" in the JSON file has greatly improved my stability and hash rate. I have no idea why that would be the case, but it is working much better now. Been running about 18 hours with no hiccups at 6.85 gh/s.

So it may not work for everyone, but I have seen a noticeable improvement.

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: ilmaz on October 19, 2018, 02:23:50 AM

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell

hi all sorry for mistake to reply
streenip hi mattaero i am new according by you say you earn 5~7$ for each z9mini on nice hash but i calcute this miner profibility on nice hash and it is 3.94$ what is the matter? have you another way to mine by this miner?
thank you

[/quote]

I flashed them all with the batch 1 bios and put most of them at 750 mhz and get 16.5k sols ish. One I only get 700 mhz and a couple are at 650, but I average about 15.5k sols total per miner. I have been using prohashing lately which I have actually had better success with (which surprised me), and the Z9's don't appear to work with nicehash properly.

divseb

newbie

Activity: 12

Merit: 0

Hello,

I need your help, i have buying a zig z1 and after lot difficulty to doing boot the miner i have finally started it and let mine for 12 hours, after that, i have moved miner on another place and now i can't setting again, i don't understand why, all setting don't save, it return always on factory set and so i can't launch the miner.

Have you an idea where is the problem, i have burn the key again, reset miner and router, but always the same thing, impossible to save setting.

Thx for your help.

metnet

newbie

Activity: 69

Merit: 0

Quote from: Hitsxx on October 18, 2018, 07:09:08 AM

https://ibb.co/b6jjQf
https://ibb.co/mHv2BL

So the Z1 began to arrive for repairs.

Hi Hitsxx,

i request you would you please take a photo closer to chip. i want to read surface of chip.

thanks in advance.

ilmaz

newbie

Activity: 13

Merit: 0

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell
[/quote]
hi all sorry for mistake to reply
streenip hi mattaero i am new according by you say you earn 5~7$ for each z9mini on nice hash but i calcute this miner profibility on nice hash and it is 3.94$ what is the matter? have you another way to mine by this miner?
thank you

typerc

newbie

Activity: 13

Merit: 0

Quote from: Hitsxx on October 18, 2018, 04:59:53 PM

Quote from: Bitreo on October 18, 2018, 12:23:28 PM

Quote from: Hitsxx on October 05, 2018, 03:39:15 PM

Quote from: Bitreo on October 04, 2018, 07:50:12 AM

if you want to modify the config files on the filesystem then you need to get the root password. if anyone can crack the password here is the hash :

Username: root
PW Hash: $6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHL

Username: fa
PW Hash: $6$muvIxroU$Lcuu06mrLbEONRLK312njB.RTI4dbC9QdJAZ6Bam0RnJpibRO2K62XHBKRKRo3U1IDFTtTAdXb/h.vp8vXuio1

regards

hash for root not full specified.

Here is the correct:

Code:

root:$6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHLt4XSfDBTyt52n7ORs.1hpj.

Decryption Result: root:envision

Use with pleasure.

@Hitsxx

thanks for helping out with the Z1 root pass, it seems that on the Z1+ the root pw has been changed. can you please help us with the Z1+ root pw. here is the hash :

root:$6$Zdo.uFbT$CIOQM3dEZygWrEBH.6iIqQ6G4vbJlf4eKE3B4QRGZ.Ecii.XFDWhxnY.o/41w7V8fJSc14lU//Myd64tO3qne/:17802:0:99999:7:::

hope you can help.

thanks
bitreo

With this hash, the password is the same - envision

It doesn't look like SSH is enabled on the Zig Z1+ at least not firmware 20181015 that kind of sucks a little bit...

Hitsxx

newbie

Activity: 15

Merit: 2

Quote from: Bitreo on October 18, 2018, 12:23:28 PM

Quote from: Hitsxx on October 05, 2018, 03:39:15 PM

Quote from: Bitreo on October 04, 2018, 07:50:12 AM

if you want to modify the config files on the filesystem then you need to get the root password. if anyone can crack the password here is the hash :

Username: root
PW Hash: $6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHL

Username: fa
PW Hash: $6$muvIxroU$Lcuu06mrLbEONRLK312njB.RTI4dbC9QdJAZ6Bam0RnJpibRO2K62XHBKRKRo3U1IDFTtTAdXb/h.vp8vXuio1

regards

hash for root not full specified.

Here is the correct:

Code:

root:$6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHLt4XSfDBTyt52n7ORs.1hpj.

Decryption Result: root:envision

Use with pleasure.

@Hitsxx

thanks for helping out with the Z1 root pass, it seems that on the Z1+ the root pw has been changed. can you please help us with the Z1+ root pw. here is the hash :

root:$6$Zdo.uFbT$CIOQM3dEZygWrEBH.6iIqQ6G4vbJlf4eKE3B4QRGZ.Ecii.XFDWhxnY.o/41w7V8fJSc14lU//Myd64tO3qne/:17802:0:99999:7:::

hope you can help.

thanks
bitreo

With this hash, the password is the same - envision

Tarlatata

jr. member

Activity: 102

Merit: 2

Any legit website to buy it from?
Asicminermarket seems to have half and half positive/scam reviews.
I'd buy dire3from the company if anyone had the legit website.

ilmaz

newbie

Activity: 13

Merit: 0

Quote from: mattaero on October 18, 2018, 01:11:10 PM

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell

No that math is not right... I make between $35 and $42 per day from my Z9 minis... I was getting much more before. That 120 is the number of days that it would take to break even on a single Z9 mini, roughly. Sorry, I had done the math without showing my work.

[/quote]

hi mattaero i am new member in this forum according by you say you earn 3~5$ for each z9mini on nice hash but i calcute this miner profibility on nice hash and it is 3.24$ what is the matter? have you another way to mine by this miner?
thank you

streenip

jr. member

Activity: 39

Merit: 1

Quote from: mattaero on October 18, 2018, 01:14:52 PM

Quote from: streenip on October 18, 2018, 01:04:33 PM

Anybody on this forum dealt or bought their miners from Estrahash
https://estrahash.com/product/buy-dayun-zig-z1-price-lyra2rev2-power-supply-psu/?fbclid=IwAR3Q4W5dLsKIgY1UiK4h052zvH44-vb6PEzkPdz0jKO_ej_VGnzkHZeYb1E

Even just a quick look shows no 3rd party reviews. Maybe they are legit, but I wouldn't trust them.

Agree, waiting for the quote from that supplier with trade assurance. Will go for the Z1+ as it has a better ROI cos this is a huge investment for me as a first time miner. Also the support is amazing in this group and I may need some help as I am not as technical as most of you. Hopefully this miner pays itself of before any drastic changes happens. It’s a gamble...risk vs reward

streenip

jr. member

Activity: 39

Merit: 1

Quote from: mattaero on October 18, 2018, 01:11:10 PM

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell

No that math is not right... I make between $35 and $42 per day from my Z9 minis... I was getting much more before. That 120 is the number of days that it would take to break even on a single Z9 mini, roughly. Sorry, I had done the math without showing my work.

[/quote]

No worries, thanks for the update and correction

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: streenip on October 18, 2018, 01:04:33 PM

Anybody on this forum dealt or bought their miners from Estrahash
https://estrahash.com/product/buy-dayun-zig-z1-price-lyra2rev2-power-supply-psu/?fbclid=IwAR3Q4W5dLsKIgY1UiK4h052zvH44-vb6PEzkPdz0jKO_ej_VGnzkHZeYb1E

Even just a quick look shows no 3rd party reviews. Maybe they are legit, but I wouldn't trust them.

mattaero

jr. member

Activity: 178

Merit: 2

Quote from: streenip on October 18, 2018, 09:39:27 AM

I have switched from Nicehash to prohashing, and am earning between $5 and $7 per day per Z9 mini in BTC. My wife and I were mining Zen for the last month, but decided to switch for simplicity. So it is ROUGHLY a 120 day ROI at current returns, which is not quite as good as the Z1 if it works properly, but better than most.

Thanks for the feedback, so with x6 you are getting around $120 per day mining Zen? Okay and these machines can still fetch around $500-600 if you decide to sell
[/quote]

No that math is not right... I make between $35 and $42 per day from my Z9 minis... I was getting much more before. That 120 is the number of days that it would take to break even on a single Z9 mini, roughly. Sorry, I had done the math without showing my work.

streenip

jr. member

Activity: 39

Merit: 1

Anybody on this forum dealt or bought their miners from Estrahash
https://estrahash.com/product/buy-dayun-zig-z1-price-lyra2rev2-power-supply-psu/?fbclid=IwAR3Q4W5dLsKIgY1UiK4h052zvH44-vb6PEzkPdz0jKO_ej_VGnzkHZeYb1E

Bitreo

newbie

Activity: 14

Merit: 0

Quote from: Hitsxx on October 05, 2018, 03:39:15 PM

Quote from: Bitreo on October 04, 2018, 07:50:12 AM

if you want to modify the config files on the filesystem then you need to get the root password. if anyone can crack the password here is the hash :

Username: root
PW Hash: $6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHL

Username: fa
PW Hash: $6$muvIxroU$Lcuu06mrLbEONRLK312njB.RTI4dbC9QdJAZ6Bam0RnJpibRO2K62XHBKRKRo3U1IDFTtTAdXb/h.vp8vXuio1

regards

hash for root not full specified.

Here is the correct:

Code:

root:$6$pvnavTv2$2W/s.veJLVbb1g9qJpFO7ATNNBiOtwt.MXABU6nRVgJwuiS3WlBrRMj0avAdnHLt4XSfDBTyt52n7ORs.1hpj.

Decryption Result: root:envision

Use with pleasure.

@Hitsxx

thanks for helping out with the Z1 root pass, it seems that on the Z1+ the root pw has been changed. can you please help us with the Z1+ root pw. here is the hash :

root:$6$Zdo.uFbT$CIOQM3dEZygWrEBH.6iIqQ6G4vbJlf4eKE3B4QRGZ.Ecii.XFDWhxnY.o/41w7V8fJSc14lU//Myd64tO3qne/:17802:0:99999:7:::

hope you can help.

thanks
bitreo

Topic: Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner - page 46. (Read 42511 times)