Code:
root@antMiner3:/dev/bus/usb/001# ls
001 002
Code:
root@antMiner3:/dev/pts# ls
0
and in a working unit it look like this
Code:
root@antMiner8:/dev/bus/usb/001# ls
001 002 004
Code:
root@antMiner8:/dev/pts# ls
0 1
anybody know how to fix this?..
Topic: Defective Antminer S3 (Read 1065 times)
I found this in the defective one..
and in a working unit it look like this
anybody know how to fix this?..
and in a working unit it look like this
anybody know how to fix this?..
Have you considered just replacing it with an S5? Given how cheap the S5's are now, considerably higher hashrate-efficiency, etc. I personally wouldn't be willing to invest any time in diagnosing or replacing parts on an S3. Even with free electricity, you are better off with S5's. Just my opinion before you invest too much time/money into it.
if I have to invest money on it I will keep it for parts.. I use it just to heat my house.. using this and a wood stove when too cold..
Have you considered just replacing it with an S5? Given how cheap the S5's are now, considerably higher hashrate-efficiency, etc. I personally wouldn't be willing to invest any time in diagnosing or replacing parts on an S3. Even with free electricity, you are better off with S5's. Just my opinion before you invest too much time/money into it.
I exchange the controller board with another miner and the problem follow the controller..
Antminer S3 doesn't have anything using USB.
I thought the LAN adapter was USB.but even if its a lan adaptor I have access to the webgui and I also tried a hard reset
and other miners does not have this usb error..
Antminer S3 doesn't have anything using USB.
I thought the LAN adapter was USB.
Antminer S3 doesn't have anything using USB.
is there anybody who can help me?.. I have a defective antminer S3 I can access to the web interface.. play with config and see logs but the fan dont spin it get 0 hash red LED is on
I got other miner I compare every config and log I found this in the defective one..
I got other miner I compare every config and log I found this in the defective one..
Code:
[ 6.340000] hub 1-1:1.0: 2 ports detected
[ 6.630000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[ 6.730000] usb 1-1.1: device descriptor read/64, error -32
[ 6.920000] usb 1-1.1: device descriptor read/64, error -32
[ 7.110000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
[ 7.210000] usb 1-1.1: device descriptor read/64, error -32
[ 7.400000] usb 1-1.1: device descriptor read/64, error -32
[ 7.590000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform
[ 8.010000] usb 1-1.1: device not accepting address 5, error -32
[ 8.110000] usb 1-1.1: new full-speed USB device number 6 using ehci-platform
[ 8.530000] usb 1-1.1: device not accepting address 6, error -32
[ 8.530000] hub 1-1:1.0: unable to enumerate USB device on port 1
Jump to: