Device not found Running Mine peon | Bitcointalksearch.org

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: doxadan on July 29, 2016, 09:16:40 AM

New to bitcoins and some of the hardware/software used

I can log in to the web interface and have configured the Miner
I see where the devices should be I see a message stating

No devices running

I have Mine peon installed equipment used is as follows.

Raspberry Pi b
a Sabrent 13 Port High Speed USB 2.0 Hub with Power Adapter And 2 Control Switches (HB-U14P)
7 ASIC Bitcoin Miner Block Erupter USB 330MH/s BTC USB

Software
Mine peon 0.2.4.6
BitMinter Pool

Testing I have done
Formatted drive and reinstalled (2 times)
Ping inside and out from Raspberry pi
Pulled all but 1 of the USB Miners ( no change)
Put USB miner directly to the pi ( no change)
rebooted /restarted miner several times

Any suggestions would be greatly appreciated

Thanks !!

Dan

So you purchased 7 block erupters and a hub to use with a rasp pi?
Well I am sorry you did this.
I wish you would have asked us about purchasing the gear first rather then buying old really power hungry gear. Newer sticks like the compac made by sidehack are 30x the hash power .

So 7 sticks of his would do 60 to 100 gh vs the 2 gh you do.

My question is what did you pay for this gear?

CoinBreader

hero member

Activity: 672

Merit: 500

Quote from: doxadan on July 29, 2016, 03:59:19 PM

Thanks

I thought it was the Newbie forum.

This started out as a little something to use my Pi for and maybe make a little change.

So what would be a good setup for mining ?

I will re post to the Newbie Forum
Dan

The hash speed is terrible , thats what im saying yo can make more btc per day from a faucet site than with your usb minersm they are too old and slow, take that in mind

doxadan

newbie

Activity: 2

Merit: 0

Thanks

I thought it was the Newbie forum.

This started out as a little something to use my Pi for and maybe make a little change.

So what would be a good setup for mining ?

I will re post to the Newbie Forum

Dan

CoinBreader

hero member

Activity: 672

Merit: 500

hello there
first of all you have posted on the wrong thread , you must post this on the Technical support
and with 2,3Gh you are not going to earn anything
This Difficulty
   Coins   Dollars
per Day   0.00000272 BTC   $0.00
per Week   0.00001905 BTC   $0.01
per Month   0.00008281 BTC   $0.05
this diff (est)   0.00001068 BTC   $0.01

Next Difficulty [estimated]
   Coins   Dollars
per Day   0.00000268 BTC   $0.00
per Week   0.00001878 BTC   $0.01
per Month   0.00008168 BTC   $0.05

hate to say that but you will make more BTC from a faucet ! Embarrassed

272satoshi is 2 maybe 3 captchas on faucet.. in other words you can make this satoshi einai 30-45min MAX

doxadan

newbie

Activity: 2

Merit: 0

New to bitcoins and some of the hardware/software used

I can log in to the web interface and have configured the Miner
I see where the devices should be I see a message stating

No devices running

I have Mine peon installed equipment used is as follows.

Raspberry Pi b
a Sabrent 13 Port High Speed USB 2.0 Hub with Power Adapter And 2 Control Switches (HB-U14P)
7 ASIC Bitcoin Miner Block Erupter USB 330MH/s BTC USB

Software
Mine peon 0.2.4.6
BitMinter Pool

Testing I have done
Formatted drive and reinstalled (2 times)
Ping inside and out from Raspberry pi
Pulled all but 1 of the USB Miners ( no change)
Put USB miner directly to the pi ( no change)
rebooted /restarted miner several times

Any suggestions would be greatly appreciated

Thanks !!

Dan

Topic: Device not found Running Mine peon (Read 806 times)