I am not sure how to read this with the -d flag. This is from a 2 GPU system.
mhash: 592.1/635.6 | a/r/hwe: 29/0/0 | ghash: 67.5 70.0 | fps: 30
I am assuming "mhash: 592.1/635.6" is the combined rate for both cards.
WHat is "ghash: 67.5 70.0"?
adding -d flag still can't separate out each card. What I wanted to accomplish is to assign each card its own pool and username.
For example, GPU1 to username gpu1, then GPU2 to username gpu2, etc.
mhash: 592.1/635.6 | a/r/hwe: 29/0/0 | ghash: 67.5 70.0 | fps: 30
I am assuming "mhash: 592.1/635.6" is the combined rate for both cards.
WHat is "ghash: 67.5 70.0"?
adding -d flag still can't separate out each card. What I wanted to accomplish is to assign each card its own pool and username.
For example, GPU1 to username gpu1, then GPU2 to username gpu2, etc.
The mhash meter is combined for all cards, 15 seconds/forever, the ghash meter is the raw number of ghash done by each card, its useful to see if cards have locked up.