Author

Topic: Different Fan Speeds Antminer S3 (Read 2764 times)

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
March 01, 2015, 04:18:48 PM
#5
yours are weird do you think you can switch the back fan (the push fan)  on both machines> I want to see if the problem follows the fans.   If I recall some fans are different and the only fix is fan replacement.


I am also having the same issue. Same location and running off the same PSU (Dell 1000w server). One of the miners also has a temp reading issue though, not sure if that makes a difference. See pics

Already tried to upgrade to latest firmware. When I got them they were on stock firmware. Made no difference though.




sr. member
Activity: 462
Merit: 250
March 01, 2015, 02:20:04 PM
#4
it is in push pool system. outgoing should pull more then ingoing otherwise push pull won't work. so that is a good rate you get.
sr. member
Activity: 434
Merit: 250
February 26, 2015, 01:07:24 PM
#3
Anyone know what could cause this?
newbie
Activity: 5
Merit: 0
February 24, 2015, 06:43:16 PM
#2
I am also having the same issue. Same location and running off the same PSU (Dell 1000w server). One of the miners also has a temp reading issue though, not sure if that makes a difference. See pics

Already tried to upgrade to latest firmware. When I got them they were on stock firmware. Made no difference though.


https://i.imgur.com/z3is70L.jpg
https://i.imgur.com/5y2A6wI.jpg
sr. member
Activity: 434
Merit: 250
February 24, 2015, 04:07:18 PM
#1
I recently purchased 2 Antminer S3s and got them all set up, but I noticed over a few days that one is significantly louder than the other.  I went into the control panel for the Antminers and found that one has fan speeds of around 2500 RPM, while the other unit has fan speeds of around 5800 RPM.  They are both in the same area so I don't see how one could be running so much faster than the other.  I keep these units in my house so I would like them as quiet as possible.  Please help!
Jump to: