Topic: Digital Ocean QuarkBar Pool Mining Guide! CPU only! (Read 917 times)
Coin relaunch. Personally i dont like the new release because there was no source on github and there were approximately 400 premined blocks
Coin failed. Relaunch Time:Sun, 02 Mar 2014 15:00:00 GMT
Coin just got out. Mine fast cause difficulty will rise fast!
Donations accepted :
QuarkBar: QRATxjfxn8kLdbwbFhpN2jaTQdyo43ii5N
Datacoin: D9myVoDFPhjWLMrKx7Ag6gH7Y3A6V441cT
Difficulty goes up fast!
1) Please use my referral https://www.digitalocean.com/?refcode=9d68ca19e204 and create a droplet 2CPU 2GB Ram Ubuntu 13.10 64x .It must be 1GB or more. You can create up to 5 droplets.
2) Connect with putty using using ip and password or just write those in the console. 1 putty per droplet! You can always download putty from here http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty is better cause you can copy paste everything:
----------------------------------------------------------------------------------------------------------------------------
sudo apt-get update
sudo apt-get install yasm -y git make g++ build-essential libminiupnpc-dev
sudo apt-get install -y libboost-all-dev libdb++-dev libgmp-dev libssl-dev dos2unix
sudo apt-get install automake libcurl3-dev
git clone https://github.com/Neisklar/quarkcoin-cpuminer.git
cd quarkcoin-cpuminer
./autogen.sh
./configure CFLAGS="-O3"
make
Now you are ready to mine. Just choose a pool and run the command that the pool needs. For example for http://qbc.akpool.net/QBC/public/ you can run this:
screen -S QKB ./minerd -a quark -o stratum+tcp://qbc.akpool.net:1145 -u NUKE1989.worker -p passwd -t 4
Right now pools look down or arent ready. Its only the start of the coin...
Donations accepted :
QuarkBar: QRATxjfxn8kLdbwbFhpN2jaTQdyo43ii5N
Datacoin: D9myVoDFPhjWLMrKx7Ag6gH7Y3A6V441cT
Difficulty goes up fast!
1) Please use my referral https://www.digitalocean.com/?refcode=9d68ca19e204 and create a droplet 2CPU 2GB Ram Ubuntu 13.10 64x .It must be 1GB or more. You can create up to 5 droplets.
2) Connect with putty using using ip and password or just write those in the console. 1 putty per droplet! You can always download putty from here http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty is better cause you can copy paste everything:
----------------------------------------------------------------------------------------------------------------------------
sudo apt-get update
sudo apt-get install yasm -y git make g++ build-essential libminiupnpc-dev
sudo apt-get install -y libboost-all-dev libdb++-dev libgmp-dev libssl-dev dos2unix
sudo apt-get install automake libcurl3-dev
git clone https://github.com/Neisklar/quarkcoin-cpuminer.git
cd quarkcoin-cpuminer
./autogen.sh
./configure CFLAGS="-O3"
make
Now you are ready to mine. Just choose a pool and run the command that the pool needs. For example for http://qbc.akpool.net/QBC/public/ you can run this:
screen -S QKB ./minerd -a quark -o stratum+tcp://qbc.akpool.net:1145 -u NUKE1989.worker -p passwd -t 4
Right now pools look down or arent ready. Its only the start of the coin...
Jump to: