Author

Topic: [DIY] - SP20 blade on Raspberry Pi (Read 1933 times)

member
Activity: 164
Merit: 10
March 24, 2015, 09:04:18 AM
#7
Hi,

It is possible to connect a spondoolies tech SP20 blade on Raspberry Pi or BeagleBone Black?
Not without considerable development effort.
We give the FPGA - ASIC protocol doc only under NDA.
TechnoBit implemented their own firmware without FPGA.
I don't think it's open source.

Hi,

Where I can find a controller board for sp20 ? the main chip is burned.
And another miner, I tried recovery but no success. the 2 leds is not flashing. only network leds.


Contact support @


Is about 3 weeks from that moment and I don't have the units working again. Poor support services, low technical skills of the person who I talking on email and skype. After 2 weeks they understand where is the problem and now I wait for the boards.

I lost one month of mining with 2 SP 20, 1 BTC. That  is not possible Sad
hero member
Activity: 658
Merit: 500
CCNA: There i fixed the internet.
March 11, 2015, 08:53:20 PM
#6
Hi,

It is possible to connect a spondoolies tech SP20 blade on Raspberry Pi or BeagleBone Black?
Not without considerable development effort.
We give the FPGA - ASIC protocol doc only under NDA.
TechnoBit implemented their own firmware without FPGA.
I don't think it's open source.

I'm working on a driver module for bfgminer that would in theory be able to handle the communications. But not worked out power mgmt yet.

I've gotta ask where did zvi come up with the name squid?
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
March 06, 2015, 09:22:32 AM
#5
Hi,

It is possible to connect a spondoolies tech SP20 blade on Raspberry Pi or BeagleBone Black?
Not without considerable development effort.
We give the FPGA - ASIC protocol doc only under NDA.
TechnoBit implemented their own firmware without FPGA.
I don't think it's open source.

Hi,

Where I can find a controller board for sp20 ? the main chip is burned.
And another miner, I tried recovery but no success. the 2 leds is not flashing. only network leds.


Contact support @
member
Activity: 164
Merit: 10
March 06, 2015, 09:12:28 AM
#4
Hi,

It is possible to connect a spondoolies tech SP20 blade on Raspberry Pi or BeagleBone Black?
Not without considerable development effort.
We give the FPGA - ASIC protocol doc only under NDA.
TechnoBit implemented their own firmware without FPGA.
I don't think it's open source.

Hi,

Where I can find a controller board for sp20 ? the main chip is burned.
And another miner, I tried recovery but no success. the 2 leds is not flashing. only network leds.

hero member
Activity: 742
Merit: 500
March 06, 2015, 08:30:32 AM
#3
damn! too bad

imagine some kind of monster miner made out of 10 sp20 blades....
 Grin
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
March 06, 2015, 08:17:59 AM
#2
Hi,

It is possible to connect a spondoolies tech SP20 blade on Raspberry Pi or BeagleBone Black?
Not without considerable development effort.
We give the FPGA - ASIC protocol doc only under NDA.
TechnoBit implemented their own firmware without FPGA.
I don't think it's open source.
member
Activity: 164
Merit: 10
March 06, 2015, 06:55:01 AM
#1
Hi,

It is possible to connect a spondoolies tech SP20 blade on Raspberry Pi or BeagleBone Black?
Jump to: