Most common place they go ignored is in the PSU, which will eventually turn into a flame thrower, 'cause the fans spin 100% when it starts to get hot!
Topic: Dont Forget to clean your rigs!!! (Read 841 times)
Seen many dust-ball fires. Don't ignore them.
Most common place they go ignored is in the PSU, which will eventually turn into a flame thrower, 'cause the fans spin 100% when it starts to get hot!
Most common place they go ignored is in the PSU, which will eventually turn into a flame thrower, 'cause the fans spin 100% when it starts to get hot!
Use a compressed air can, it will do the trick.
For those that don't know, never spin a fan with forced air. If blowing/vacuuming the fan, hold the blades still. Also it is inadvisable to touch any PCB components with a vacuum(danger of static discharge).
i noticed my rig was running a bit warm so i took it out and vacuumed the fans and heatsink. Just a tiny bit of dust on the fans made them drop by 500rpm and my temp went up to 82 C. now its back to 76 C.
also never use computer duster without a vacuum. you dont want to blow the dust all over it will just get into hard to reach places.
happy mining
also never use computer duster without a vacuum. you dont want to blow the dust all over it will just get into hard to reach places.
happy mining
Jump to: