DPS-2000bbb modding - Which pins to connect?

polymer_city

member

Activity: 98

Merit: 10

Ok, not sure what was happening, it may have been a bad ground / dry solder...

Think one was too hot testing without fan and now with load its working.. done nothing different just changed jumper cable.

Thanks for the help

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: polymer_city on July 03, 2016, 03:59:48 AM

This is driving me insane..

I have 3 psu's

1 x 2000bb
2 x 2000bbb

All do the same thing... after 1min DC light does out?

Put a load to 12V and it will work.

polymer_city

member

Activity: 98

Merit: 10

This is driving me insane..

I have 3 psu's

1 x 2000bb
2 x 2000bbb

All do the same thing... after 1min DC light does out?

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: polymer_city on July 03, 2016, 03:43:40 AM

I have fans, I need to make it come out of standby mode

I'm testing and if I short C2 and C1 it comes out of standby.. But it doesn't seem to work all the time??

Works for me with C2 and A6 for 2 sngle PSU-s.

polymer_city

member

Activity: 98

Merit: 10

I have fans, I need to make it come out of standby mode

I'm testing and if I short C2 and C1 it comes out of standby.. But it doesn't seem to work all the time??

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: polymer_city on July 03, 2016, 03:25:22 AM

What is the other pins need to be connected to make it stay on?

http://static.rcgroups.net/forums/attachments/3/1/3/5/4/3/a3982688-159-Bladecenter%202000w%20PS.jpg

You need a fan.

polymer_city

member

Activity: 98

Merit: 10

Hi can, I have connected A6 - C2 to power on - It powers on..

But it then goes to standby after a couple of minutes

What is the other pins need to be connected to make it stay on?

Thanks!!

Topic: DPS-2000bbb modding - Which pins to connect? (Read 569 times)