Just show her how much money the machine brings in a month. But be sure to subtract your electricity costs and...
Ah nevermind.
lol Ah nevermind.
Topic: Dragon 1T = Wife not happy! (Fan Noise) (Read 1779 times)
Just show her how much money the machine brings in a month. But be sure to subtract your electricity costs and...
Ah nevermind.
Ah nevermind.
My wife once complained about the noise.... I said thats fine, ill shut it off when you make a list of all the money you spend in a month. Ive never seen the list, and she doesnt complain about the noise anymore.
I used to have ArticCooling fans, some good airflow, very quiet. Just look for the model for more rpms.
Is there a quieter 120mm fan that can be swapped out and provide as much airflow?
Time to upgrade.
The wife.
-----
Datacenters where this stuff belongs really unless you can tuck it away unnoticed to your wife. I had the same problem with FPGA's ahahah glad to see that women world wide won't stand for fan noise.
Thanks for the chuckle....That upgrade would cost a heck of a lot more than a datacenter.
Ya you couldn't live without her I bet.
Should have seen the nest of wires I had going in the living room for a few months. Wife was not impressed.
Is there a quieter 120mm fan that can be swapped out and provide as much airflow?
Time to upgrade.
The wife.
-----
Datacenters where this stuff belongs really unless you can tuck it away unnoticed to your wife. I had the same problem with FPGA's ahahah glad to see that women world wide won't stand for fan noise.
Thanks for the chuckle....That upgrade would cost a heck of a lot more than a datacenter.
Buy arctic cooling fans, keep in mid to have optimal CFM , and thats that, ull never have to worry about noise nor heat again.
they have awesome bearing and brushless fans, which means they wont wore out nor produce almost any noise.
been using them for years, with 100% satisfaction
they have awesome bearing and brushless fans, which means they wont wore out nor produce almost any noise.
been using them for years, with 100% satisfaction
Not sure how much space you have in the case or if this will fit, but it's worth quick measure and they works great.
SILVERSTONE
http://www.newegg.com/Product/Product.aspx?Item=N82E16835220056&cm_re=140mm_case_fan-_-35-220-056-_-Product
Basically,
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
What are your chip temps? I have two bgears PWM 120mm pushing 110CFM and a pair of 140mm bgears PWM pushing another 110CFM and it still gets hot in ambient above 75F to a point where it shuts off.
All the info you just asked me is in my post
intake fans Corsair SP120's ~2300rpms
added two 140mm exhaust fans 1900rpm (Bgears ironically but no problems thus far)
temps are ~ 46-51c in a 20c room
Basically my System runs 30c warmer than the room temp. Make sure that you set all your fans to blow in
one direction.
J
Is there a quieter 120mm fan that can be swapped out and provide as much airflow?
Most 120mm fan aren't noisy, how close are you to the dragon 1t?
Basically,
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
What are your chip temps? I have two bgears PWM 120mm pushing 110CFM and a pair of 140mm bgears PWM pushing another 110CFM and it still gets hot in ambient above 75F to a point where it shuts off.
Thats because bgears are shit
I. Have the same. Problem too I am thinking to place them in the datecenter
Take them to the garage and have in mind its quiter that other miners
Changing the fans will not do much good as there are not quite and powerfull together.
I have tried quiet computer fans but these suck air very slow its not for miners and specially
in the summer time that you need more cooling
I dont know where you are located
Taking your miners into a data center is a solution but in europe there are not cheep ones.
Changing the fans will not do much good as there are not quite and powerfull together.
I have tried quiet computer fans but these suck air very slow its not for miners and specially
in the summer time that you need more cooling
I dont know where you are located
Taking your miners into a data center is a solution but in europe there are not cheep ones.
Basically,
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
What are your chip temps? I have two bgears PWM 120mm pushing 110CFM and a pair of 140mm bgears PWM pushing another 110CFM and it still gets hot in ambient above 75F to a point where it shuts off.
They don't know how to design.
They keep experimenting with parts.
Replace your thermal pads with thermal pads from Fujipoly, even the cheapest one will lower your temps.
They use thermal with less than 3 watt/mk and those thermal pads are too thick.
Is there a quieter 120mm fan that can be swapped out and provide as much airflow?
Time to upgrade.
The wife.
-----
Datacenters where this stuff belongs really unless you can tuck it away unnoticed to your wife. I had the same problem with FPGA's ahahah glad to see that women world wide won't stand for fan noise.
Basically,
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
What are your chip temps? I have two bgears PWM 120mm pushing 110CFM and a pair of 140mm bgears PWM pushing another 110CFM and it still gets hot in ambient above 75F to a point where it shuts off.
Basically,
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
Swapped out the intake fans Corsair SP120's ~2300rpms and added two 140mm exhaust fans 1900rpm
temps are ~ 46-51c in a 20c room. Left to run overnight.
https://bitcointalk.org/index.php?topic=545642.40
Doesn't sound like a vacuum cleaner after this
J
If they're the 4 blade models, anything under 130CFM will cause the boards to overheat and shut down. I learned that lesson myself.
Wow, is that 65cfm each or 130 each? I'm not sure I can gain anything with that kind of air movement anyways. Guess I'm going to have to load up at work.
If they're the 4 blade models, anything under 130CFM will cause the boards to overheat and shut down. I learned that lesson myself.
Is there a quieter 120mm fan that can be swapped out and provide as much airflow?
I personally left the original fan's in as they work good. I do know people have replaced with quieter ones.
Have heard a few use quieter intake fans, and add exhaust fans in back helping airflow to help substitute for the original fans.
Is there a quieter 120mm fan that can be swapped out and provide as much airflow?
Jump to: