Topic: Dual 5870's only doing about 200Mhash each. How do I fix this? (Read 1072 times)
IMO if memory is underclocked at 300 MHz -w256 gives better results
What are you using for workload size? Should be -w128.
Update -- switched to:
./phoenix.py -k poclbm DEVICE=2 AGGRESSION=7 BFI_INT VECTORS
And now at 350 MHhash on each card.
Better. Not perfect... but acceptable for now :-)
./phoenix.py -k poclbm DEVICE=2 AGGRESSION=7 BFI_INT VECTORS
And now at 350 MHhash on each card.
Better. Not perfect... but acceptable for now :-)
These should be getting 300 if not 400 each!
This is running "phoenix.py -k poclbm DEVICE=1 AGGRESSION=3"
When I run poclbm.py it runs for a little bit then says:
283051 khash/s
Verification failed, check hardware!
This is running "phoenix.py -k poclbm DEVICE=1 AGGRESSION=3"
When I run poclbm.py it runs for a little bit then says:
283051 khash/s
Verification failed, check hardware!
Jump to: