The WebGUI that I mean is the page of the miner where you can access it by typing the IP address of your miner on the browser URL box. Now, it will ask for username and password then enter admin/admin.
You can follow this video guide below to access the WebGUI: https://youtu.be/8JjQ1KWyjLk
Topic: Ebit 10.2 miner reduce hashrate (Read 136 times)
Can you try to access the miner on WebGUI and find the "system configuration" it must look like this below?
Under this page look for PLL and try to change and reduce the value then check the miner if it reduces the hash rate and temp.
You can also experiment with the temp limit and change the value then test if it helps to reduce the temp and hash rate.
Under this page look for PLL and try to change and reduce the value then check the miner if it reduces the hash rate and temp.
You can also experiment with the temp limit and change the value then test if it helps to reduce the temp and hash rate.
Hello All
I have I think an Ebit 10.2 hashing at 28th but in summer now it is getting a bit hot and I would like to drop it down a couple th to keep it a bit cooler but dont know how and cant find anything on how to make your miner run slower.
Many thanks for any replys.
I have I think an Ebit 10.2 hashing at 28th but in summer now it is getting a bit hot and I would like to drop it down a couple th to keep it a bit cooler but dont know how and cant find anything on how to make your miner run slower.
Many thanks for any replys.
Jump to: