Ebit E9+ issue | Bitcointalksearch.org

mrbugera2

jr. member

Activity: 85

Merit: 2

Quote from: smartass111 on January 21, 2018, 12:30:57 PM

best way to remote control your ebit e9+ - is to obtain ssh root access

this problem with objects - is actually some bug in their modified cgminer.
can be fixed either by unit restart - or SW restart in ssh console

thank you for your reply..

can you explain me what ssh root access means?

and SW resart in ssh console..

the only way i control me asics is this:
i have 1 pc in my server room (where are my miners) i go to itsip adressees with team viewer and i restart them..
in bitmain products it has a soft from which i can restart it all (D3,L3,S9) but on e9 there is only one restart button with its ip but it doesn't help unless i switch it from power plug and power it on again

smartass111

member

Activity: 113

Merit: 21

best way to remote control your ebit e9+ - is to obtain ssh root access

this problem with objects - is actually some bug in their modified cgminer.
can be fixed either by unit restart - or SW restart in ssh console

mrbugera2

jr. member

Activity: 85

Merit: 2

Quote from: fanatic26 on January 19, 2018, 03:09:04 PM

How exactly is DHCP going to fix a webpage reporting issue? That makes no sense.

yup you where right i have the same problem

mrbugera2

jr. member

Activity: 85

Merit: 2

i have changed lets see

fanatic26

hero member

Activity: 756

Merit: 560

How exactly is DHCP going to fix a webpage reporting issue? That makes no sense.

mrbugera2

jr. member

Activity: 85

Merit: 2

Quote from: alred911 on January 19, 2018, 02:11:13 PM

i had the same error,

it was a network error, i think i fix it by activating DHCP. not sure tho.

i will try DHCP and will write if it fixs, thanks

mrbugera2

jr. member

Activity: 85

Merit: 2

Quote from: shift4ie on January 19, 2018, 01:14:12 PM

Not much help but for what it's worth I get that whenever I leave the web interface open for a while, doesn't happen if I just connect and then close it though.
I've also not been able to remotely restart the device, I've always done it manually.

There's a thread on here where a couple of people had developed a custom firmware to load on it so that's an option if you want to go that route. I just left mine and only monitor it from the stats on the pool i'm using.

A guess another option to restart remotely would be to use some sort of smart socket or power bar.

thanks for your reply.. what firmware do you have now?

alred911

member

Activity: 72

Merit: 10

i had the same error,

it was a network error, i think i fix it by activating DHCP. not sure tho.

shift4ie

newbie

Activity: 1

Merit: 0

Not much help but for what it's worth I get that whenever I leave the web interface open for a while, doesn't happen if I just connect and then close it though.
I've also not been able to remotely restart the device, I've always done it manually.

There's a thread on here where a couple of people had developed a custom firmware to load on it so that's an option if you want to go that route. I just left mine and only monitor it from the stats on the pool i'm using.

A guess another option to restart remotely would be to use some sort of smart socket or power bar.

mrbugera2

jr. member

Activity: 85

Merit: 2

hello guys i have 10 ebit e9+ and 6 of them shows this error and it doesn't restarts by manual i have to go and turn off from psu and after that it turns on and works but in 10 min it shows me the same error

https://ibb.co/kHNiww

help please
p.s. do you know any software ro control e9? (ro restart it manual)

Topic: Ebit E9+ issue (Read 245 times)