Electrum 4.0.9 can't send funds... | Bitcointalksearch.org

xenon131

hero member

Activity: 491

Merit: 1259

Nihil impunitum

Quote from: HCP on February 27, 2021, 02:40:09 PM

~.

Doesn't matter how to call it. My point centered on the use of Electrum portable version. Each new release of Electrum has to be run as new instance that resides in the separate folder with own wallet files. This way you can run whichever version you want any time and not bother yourself about wallet files.

HCP

legendary

Activity: 2086

Merit: 4363

It has nothing to do with any encryption. The encryption of the wallet file has not changed... it is simply the "seed_version" value being stored in the wallet file...

Electrum uses the "seed_version" value as a "wallet version" value and it is incremented whenever modifications are made that alters the wallet file format in some manner. This is to prevent new additions and/or modifications to the wallet file structure causing unexpected errors should an "upgraded" wallet be attempted to be opened in an older version of Electrum that is not expecting them.

So, when wallet file format changes are made, the "version" is incremented... and the wallet is upgraded the first time the wallet file is opened using a newer version. At some point between 4.0.5 and 4.0.9, the version was incremented from 32 to 33... hence why, after opening the wallet file with 4.0.9, the wallet file can no longer be opened in 4.0.5.

In the future, should you wish to maintain the ability to "rollback" to the previous version in case an update causes issues... you should backup your wallet file before you update Electrum. This will mean you have a copy of the wallet file with the "earlier" version.

NOTE: not all updates actually modify the version... the wallet version was actually last updated in version 4.0.8...

BitMaxz

legendary

Activity: 3472

Merit: 3217

Playbet.io - Crypto Casino and Sportsbook

Quote from: starkey2600 on February 27, 2021, 08:57:41 AM

I do still have an issue not being able to open the wallet in a previous version now though. Only 4.09 will recognize the correct password.

The latest version of Electrum has different encryption so if you already open the wallet file on 4.09 it won't work on the old version but you can try to revert the wallet file back to the old version.
To revert it back to the old version just right-click the wallet file and then properties>Previous version. You can see a list of the previous versions just choose the oldest one. Make sure to make a copy of the wallet file first before you do this.

Or another option is to use your backup seed not recommended if your device doesn't have any protection or you can keep your pc/laptop offline while restoring the wallet with seed.

starkey2600

newbie

Activity: 5

Merit: 0

Yea, looks like it's just fees like suggested. I had never truly dug into the fee structure, so this was pretty eye opening for me.

I do still have an issue not being able to open the wallet in a previous version now though. Only 4.09 will recognize the correct password.

HCP

legendary

Activity: 2086

Merit: 4363

Quote from: Jeffro64 on February 21, 2021, 06:54:28 PM

Older version was taken out when the new version installed. I didn't see a download for past versions on electrum.org....unless I missed it.

You did miss it... Tongue

Clicking that link will take you here: https://download.electrum.org/

It has every version released since version 1.8! Shocked

However, I would strongly recommend you don't blindly download old versions unless you are 100% sure of what you're doing... and you have a very good reason for rolling back to a previous version.

Honestly, it sounds like you have 8 inputs and would be creating a fairly "large" transaction from a "data size" point of view. Given how ridiculously busy the network is, and how high fees are currently, it wouldn't surprise me that the default fee estimation in Electrum is struggling with calculating a decent fee. There are countless users on these forums at the moment with "stuck transactions"... there are over 100k unconfirmed transactions at the moment Undecided

Look at https://mempool.space/ and https://jochen-hoenicke.de/queue/#BTC,24h and https://bitcoiner.live/?confidence=0.9 to get a feel for the best rates to use for fees and choose one appropriate to your requirements (ie. higher for more chance of getting fast confirmation... lower if you don't care about confirmation time and want to send cheaply)

hosseinimr93

legendary

Activity: 2380

Merit: 5213

Quote from: starkey2600 on February 26, 2021, 10:02:23 AM

I see 8 rows in the coins tab

If you send the total balance to another address, there won't be any change and your transaction will have only 1 output. In this case, the transaction size would be about 1220 vbyte.

You already stated that your balance is 167 dollar and you can send only 85 dollar. This means paying 82 dollar (0.00175 BTC) as transaction fee.
So, the fee rate was around 142 sat/byte when you were trying to send the fund.

If you want a fast confirmation, you have to pay this fee. If not, set the fee rate to lower amounts and just wait for your transaction to be confirmed.

For example, if you set the fee rate to 10 sat/byte, you will pay about 0.000122 BTC (5.7 dollar) as transaction fee. But your transaction won't be confirmed fast. (It may be confirmed at the weekends. It's possible that it takes longer time.)

If you set the fee rate to at least 10 sat/byte, you will be able to use ViaBTC free accelerator to increase the chance of confirmation.

Husna QA

legendary

Activity: 2296

Merit: 2892

#SWGT CERTIK Audited

Quote from: Jeffro64 on February 21, 2021, 06:03:24 PM

I just upgraded my Electrum to the newest 4.0.9 and now when I try to send funds it won't let me for some reason. I have tested the receive funds and that works just fine, but when I go to send it says "Not enough funds" even though there is plenty in the wallet. Is this a bug in the new version or maybe something else? I was able to send just fine in the earlier version but now I can't. Thanks in advance for any help on this!

EDIT: I also tried installing on a different PC and importing my wallet...Same problem with 4.0.9

When you press the 'Pay ...' button, try selecting 'Advanced'; Then try setting the 'Target fee' amount manually until the 'Finalize' button becomes active and clickable. Then select 'Sign' and 'Broadcast' your transaction.
I suggest you check the Replace by fee option.

Predicting Bitcoin fees for transactions can be seen here:
https://bitcoinfees.earn.com/
https://bitcoiner.live/

Abdussamad

legendary

Activity: 3710

Merit: 1586

you should look closer at the miner fees. you should customize them:

https://bitcoinelectrum.com/how-to-manually-set-transaction-fees/

you don't have a 2fa wallet btw. 2fa at an exchange does not mean a 2fa electrum wallet.

starkey2600

newbie

Activity: 5

Merit: 0

Quote from: hosseinimr93 on February 26, 2021, 09:37:30 AM

Quote from: starkey2600 on February 26, 2021, 08:49:00 AM

I have $167 in the wallet, and it shows that as the balance, however max send only wants to send around $85. I can't imagine there is that much fees. I have checked and don't have any frozen addresses or coins.

The transaction fee isn't fixed in dollar and doesn't depend on the amount of bitcoin you send.
The transaction fee depends on number of inputs and outputs and your addresses type (legacy, nested segwit and native segwit, multi-sig). It also depends on network congestion and how fast you want your transaction to be confirmed.

There's a high probability that you have received the fund in several transactions and now you are combining all of them in a single transaction. If that's the case, you have many inputs and your transaction has a big size.

How many rows do you see in "Coins" tab?
Is your wallet legacy or segwit? (Legacy addresses start with 1, nested segwit addresses start with 3 and native segwit addresses start with bc1)
Aren't you using a 2FA wallet?
How much did you set the fee rate to?

I see 8 rows in the coins tab

I see, I didn't realize the complexity of the fee structure. Still seems like a big amount though if that's the case.

I checked and it looks like they are legacy addresses. Hmm. I use a password to get into the wallet and to send funds. I guess I did use 2fa to get these funds. Like I have 2fa turned on for the exchange they were purchased from originally, then i sent to this wallet.

I also see that when I look at the addresses and sort by balance, 2 of them are "receiving" and the other 6 are "change" type.
So if this is a fee/legacy wallet issue, what would be the best way to get the most coin possible to a new proper wallet?

hosseinimr93

legendary

Activity: 2380

Merit: 5213

Quote from: starkey2600 on February 26, 2021, 08:49:00 AM

I have $167 in the wallet, and it shows that as the balance, however max send only wants to send around $85. I can't imagine there is that much fees. I have checked and don't have any frozen addresses or coins.

The transaction fee isn't fixed in dollar and doesn't depend on the amount of bitcoin you send.
The transaction fee depends on number of inputs and outputs and your addresses type (legacy, nested segwit and native segwit, multi-sig). It also depends on network congestion and how fast you want your transaction to be confirmed.

There's a high probability that you have received the fund in several transactions and now you are combining all of them in a single transaction. If that's the case, you have many inputs and your transaction has a big size.

How many rows do you see in "Coins" tab?
Is your wallet legacy or segwit? (Legacy addresses start with 1, nested segwit addresses start with 3 and native segwit addresses start with bc1)
Aren't you using a 2FA wallet?
How much did you set the fee rate to?

starkey2600

newbie

Activity: 5

Merit: 0

Quote from: Abdussamad on February 26, 2021, 08:38:59 AM

don't use older versions

go through this list to see what may be the cause of the error message:

https://bitcoinelectrum.com/frequently-asked-questions/#why-am-i-being-told-that-i-have-insufficient-funds

I've gone through this list and it unfortunately didn't provide any solutions. I have $167 in the wallet, and it shows that as the balance, however max send only wants to send around $85. I can't imagine there is that much fees. I have checked and don't have any frozen addresses or coins.

I also validated the transactions do show as confirmed on the blockchain.

starkey2600

newbie

Activity: 5

Merit: 0

Quote from: Abdussamad on February 26, 2021, 08:38:59 AM

don't use older versions

go through this list to see what may be the cause of the error message:

https://bitcoinelectrum.com/frequently-asked-questions/#why-am-i-being-told-that-i-have-insufficient-funds

It was just one of those things that it worked. So didn't upgrade because I was worried about breaking it. Soon as I upgraded, it broke.

Alright, I'll look through this now.

Abdussamad

legendary

Activity: 3710

Merit: 1586

don't use older versions

go through this list to see what may be the cause of the error message:

https://bitcoinelectrum.com/frequently-asked-questions/#why-am-i-being-told-that-i-have-insufficient-funds

starkey2600

newbie

Activity: 5

Merit: 0

Quote from: Jeffro64 on February 21, 2021, 06:03:24 PM

Hello all,

I just upgraded my Electrum to the newest 4.0.9 and now when I try to send funds it won't let me for some reason. I have tested the receive funds and that works just fine, but when I go to send it says "Not enough funds" even though there is plenty in the wallet. Is this a bug in the new version or maybe something else? I was able to send just fine in the earlier version but now I can't. Thanks in advance for any help on this!

EDIT: I also tried installing on a different PC and importing my wallet...Same problem with 4.0.9

I have the same issue. I was using the portable version of 3.3.6 and just downloaded the portable version of 4.09. Now my balance shows correctly but I am unable send to more than about half of what's in the wallet. It seems like the funds that were there before I upgraded can be sent but nothing that has been sent afterwards can be sent. I tried to download another version of the portable, 4.05 and it won't even open the wallet, just gives incorrect password even though I tried 100 times and know the password and it opens right up in 4.09. Also tried the standalone exe, same thing. Balance shows correct but can't send more than what was in the wallet before upgrade.

Wallet is synced and I validated that the transactions were confirmed on the blockchain.

nc50lc

legendary

Activity: 2618

Merit: 6452

Self-proclaimed Genius

Quote from: Jeffro64 on February 21, 2021, 06:03:24 PM

I just upgraded my Electrum to the newest 4.0.9 and now when I try to send funds it won't let me for some reason. -snip-

If you click "max" after pasting an address in the send tab, is the amount getting auto-filled?
If "0" and you have positive balance, then it must be what ranochigo said, you must have frozen an address or coin.
To check that, open "Addresses" tab ('View->Show Addresses' to enable the tab) and "Coins" tab (View->Show Coins), look for entries with blue highlight.
Frozen coins will have the highlight under "Output point", not the address.

To unfreeze them, use "right-click->Unfreeze Coin/Address".

Quote from: bitmover on February 21, 2021, 09:39:57 PM

You cannot send coins if the deposit is not confirmed yet! THis might be the problem. As the network is congested, your coins might have not been confirmed yet.

That may be an issue if he changed the settings in both PC,
Electrum will default with "spend only confirmed coin" disabled, that will enable new users to spend unconfirmed UTXO.
@Jeffro64 if you've ticked that particular setting and the coin is unconfirmed, disable it to be able to send now.

bitmover

legendary

Activity: 2352

Merit: 6089

bitcoindata.science

Quote from: Jeffro64 on February 21, 2021, 06:03:24 PM

I have tested the receive funds and that works just fine, but when I go to send it says "Not enough funds" even though there is plenty in the wallet.

Let me ask you question.

You just received those BTC?
Can you please open blockchain.com and insert your transaction ID in the search field. Do you see "unconfirmed transaction" or is the transaction already confirmed?

You cannot send coins if the deposit is not confirmed yet! THis might be the problem. As the network is congested, your coins might have not been confirmed yet.

ranochigo

legendary

Activity: 3038

Merit: 4418

Crypto Swap Exchange

Are you using TrustedCoin 2FA? Electrum 4.0.9 is working perfectly fine for me. Did you freeze any of the inputs as well?

You can try installing the previous versions here: https://download.electrum.org/.

Jeffro64

newbie

Activity: 6

Merit: 0

Quote from: AmoreJaz on February 21, 2021, 06:25:03 PM

Quote from: Jeffro64 on February 21, 2021, 06:20:03 PM

No transaction went through...Because of the "Not enough funds" I couldn't even put in my password to complete the transaction. But I did check to make sure and no transaction shows. Also when I was trying I set the fees slider in different positions to to see if that was the problem...from lowest to the midway point. Still nothing.

why not try to use the older version of electrum to make this transaction? still using the 4.0.5 ver as am too lazy to install the newer one. dont encounter any prob.
i dont understand why it is showing not enough funds. maybe the fees is too high as DireWolf said above.

Older version was taken out when the new version installed. I didn't see a download for past versions on electrum.org....unless I missed it.

Jeffro64

newbie

Activity: 6

Merit: 0

Quote from: hosseinimr93 on February 21, 2021, 06:25:40 PM

Where did you download electrum from? Did you download it from electrum.org?

Is your balance shown correctly?
You can see your balance in the bottom left corner of the window.

Is your wallet synced?
Is the circle located in the bottom right corner of the window green?

https://i.imgur.com/4ToGnfH.jpg

Yes sir to all three. Everything is normal except the send function.

hosseinimr93

legendary

Activity: 2380

Merit: 5213

Where did you download electrum from? Did you download it from electrum.org?

Is your balance shown correctly?
You can see your balance in the bottom left corner of the window.

Is your wallet synced?
Is the circle located in the bottom right corner of the window green?

AmoreJaz

legendary

Activity: 3122

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: Jeffro64 on February 21, 2021, 06:20:03 PM

No transaction went through...Because of the "Not enough funds" I couldn't even put in my password to complete the transaction. But I did check to make sure and no transaction shows. Also when I was trying I set the fees slider in different positions to to see if that was the problem...from lowest to the midway point. Still nothing.

why not try to use the older version of electrum to make this transaction? still using the 4.0.5 ver as am too lazy to install the newer one. dont encounter any prob.
i dont understand why it is showing not enough funds. maybe the fees is too high as DireWolf said above.

Jeffro64

newbie

Activity: 6

Merit: 0

No transaction went through...Because of the "Not enough funds" I couldn't even put in my password to complete the transaction. But I did check to make sure and no transaction shows. Also when I was trying I set the fees slider in different positions to to see if that was the problem...from lowest to the midway point. Still nothing.

DireWolfM14

copper member

Activity: 2338

Merit: 4543

Join the world-leading crypto sportsbook NOW!

Check your transaction again. The only time I've ran into that issue is when the fees are so high, that they're more than coins available in the wallet or the specific UTXO you're trying to spend.

Jeffro64

newbie

Activity: 6

Merit: 0

Hello all,

I just upgraded my Electrum to the newest 4.0.9 and now when I try to send funds it won't let me for some reason. I have tested the receive funds and that works just fine, but when I go to send it says "Not enough funds" even though there is plenty in the wallet. Is this a bug in the new version or maybe something else? I was able to send just fine in the earlier version but now I can't. Thanks in advance for any help on this!

EDIT: I also tried installing on a different PC and importing my wallet...Same problem with 4.0.9

Topic: Electrum 4.0.9 can't send funds... (Read 294 times)