A memory location can be altered by something as simple and random as a cosmic ray.
I’m not even sure why they call them code editors. The only thing we use them for is copying. When you save your EEPROM image make sure to note the board, board version, board subversion e.g. A8V3 and temp sensor. You may get away with using a different subversion But you will never get it be with using the wrong temp sensor.
Topic: Error! Chain [2] EEPROM data corrupted (Read 171 times)
yes would love to know how error happened.
also a link to the gear you used to reprogram it.
also a link to the gear you used to reprogram it.
The problem is solved. It was an EEPROM program problem, I rewrote the EEPROM program using the hash board code editor. It has been running normally for half a month now.
Gave you merit for reporting back, very well done.
So what caused the EEPROM issue? as far as I know you can't edit it without a specific tool like the code editor, the control board itself has noway to write onto it, so what went wrong? did the issue happen after a power cut? firmware flash? or just randomly.?
The problem is solved. It was an EEPROM program problem, I rewrote the EEPROM program using the hash board code editor. It has been running normally for half a month now.
There is some error with the Antminer L7 hash board, here is the log:
I would like to know why this error occurs? How to avoid it?
Code:
Normal zone: 0 pages reserved
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc:
0
1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209340K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 20036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090e410 (9242 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
.bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6964K (cd42d000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 322110083
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID C7CFF589-3D04-4ECB-B10E-70A73BA643A8, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 33/21, WL threshold: 4096, image sequence number: 183710239
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID FEDBFDD6-2CB2-4ED5-B170-449E62906392, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb051
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
random: nonblocking pool is initialized
===========================================Miner log===========================================
time="1970-01-01 00:00:10" level=info pid=879 msg="release version"
time="1970-01-01 00:00:10" level=info pid=879 msg="asic mode"
time="1970-01-01 00:00:10" level=notice pid=879 msg="algo ltc fan_control_mode 2"
time="1970-01-01 00:00:10" level=notice pid=879 msg=platform_init
time="1970-01-01 00:00:10" level=info pid=879 msg="mmap fpga_mem_addr_hal = 0xb5d21000
"
time="1970-01-01 00:00:10" level=info pid=879 msg="HARDWARE_VERSION = 0x2000b051
"
time="1970-01-01 00:00:10" level=notice pid=879 msg="chain_offset 0, chain 0"
time="1970-01-01 00:00:10" level=notice pid=879 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="1970-01-01 00:00:10" level=notice pid=879 msg="chain_offset 1, chain 1"
time="1970-01-01 00:00:11" level=notice pid=879 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="1970-01-01 00:00:11" level=notice pid=879 msg="chain_offset 2, chain 2"
time="1970-01-01 00:00:12" level=notice pid=879 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="1970-01-01 00:00:12" level=notice pid=879 msg="reset fpga"
time="1970-01-01 00:00:12" level=notice pid=879 msg="Begain check_fan_valiad"
time="1970-01-01 00:00:21" level=notice pid=879 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="1970-01-01 00:00:21" level=notice pid=879 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="1970-01-01 00:00:21" level=info pid=879 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48"
time="1970-01-01 00:00:21" level=notice pid=879 msg="miner thread with 3 backend runtime created pid 879"
time="1970-01-01 00:00:21" level=notice pid=879 msg="opt_algo 6, ltc"
time="1970-01-01 00:00:27" level=error pid=879 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="1970-01-01 00:00:27" level=error pid=879 msg="Data decode fail for chain 2.
"
time="1970-01-01 00:00:29" level=error pid=879 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="1970-01-01 00:00:29" level=error pid=879 msg="Data decode fail for chain 2.
"
time="1970-01-01 00:00:31" level=error pid=879 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="1970-01-01 00:00:31" level=error pid=879 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:00:34" level=error pid=879 msg="Data load fail for chain 2.
"
time="2022-08-03 01:00:34" level=error pid=879 msg="Chain2 load EEPROM error."
time="2022-08-03 01:00:34" level=notice pid=879 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:00:57" level=info pid=955 msg="release version"
time="2022-08-03 01:00:57" level=info pid=955 msg="asic mode"
time="2022-08-03 01:00:57" level=notice pid=955 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:00:57" level=notice pid=955 msg=platform_init
time="2022-08-03 01:00:57" level=info pid=955 msg="mmap fpga_mem_addr_hal = 0xb5d2f000
"
time="2022-08-03 01:00:57" level=info pid=955 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:00:57" level=notice pid=955 msg="chain_offset 0, chain 0"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 1, chain 1"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 2, chain 2"
time="2022-08-03 01:00:59" level=notice pid=955 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:00:59" level=notice pid=955 msg="reset fpga"
time="2022-08-03 01:00:59" level=notice pid=955 msg="Begain check_fan_valiad"
time="2022-08-03 01:01:00" level=notice pid=955 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:01:00" level=notice pid=955 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:01:00" level=info pid=955 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48"
time="2022-08-03 01:01:00" level=notice pid=955 msg="miner thread with 3 backend runtime created pid 955"
time="2022-08-03 01:01:00" level=notice pid=955 msg="opt_algo 6, ltc"
time="2022-08-03 01:01:05" level=error pid=955 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:05" level=error pid=955 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:08" level=error pid=955 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:08" level=error pid=955 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:10" level=error pid=955 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:10" level=error pid=955 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:10" level=error pid=955 msg="Data load fail for chain 2.
"
time="2022-08-03 01:01:10" level=error pid=955 msg="Chain2 load EEPROM error."
time="2022-08-03 01:01:10" level=notice pid=955 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:01:22" level=info pid=1144 msg="release version"
time="2022-08-03 01:01:22" level=info pid=1144 msg="asic mode"
time="2022-08-03 01:01:22" level=notice pid=1144 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:01:22" level=notice pid=1144 msg=platform_init
time="2022-08-03 01:01:22" level=info pid=1144 msg="mmap fpga_mem_addr_hal = 0xb5cc0000
"
time="2022-08-03 01:01:22" level=info pid=1144 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:01:22" level=notice pid=1144 msg="chain_offset 0, chain 0"
time="2022-08-03 01:01:23" level=notice pid=1144 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:01:23" level=notice pid=1144 msg="chain_offset 1, chain 1"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="chain_offset 2, chain 2"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="reset fpga"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="Begain check_fan_valiad"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:01:25" level=info pid=1144 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:01:25" level=notice pid=1144 msg="miner thread with 3 backend runtime created pid 1144"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="opt_algo 6, ltc"
time="2022-08-03 01:01:31" level=error pid=1144 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:31" level=error pid=1144 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:33" level=error pid=1144 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:33" level=error pid=1144 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:35" level=error pid=1144 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:35" level=error pid=1144 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:36" level=error pid=1144 msg="Data load fail for chain 2.
"
time="2022-08-03 01:01:36" level=error pid=1144 msg="Chain2 load EEPROM error."
time="2022-08-03 01:01:36" level=notice pid=1144 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:01:47" level=info pid=1280 msg="release version"
time="2022-08-03 01:01:47" level=info pid=1280 msg="asic mode"
time="2022-08-03 01:01:47" level=notice pid=1280 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:01:47" level=notice pid=1280 msg=platform_init
time="2022-08-03 01:01:47" level=info pid=1280 msg="mmap fpga_mem_addr_hal = 0xb5da1000
"
time="2022-08-03 01:01:47" level=info pid=1280 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:01:47" level=notice pid=1280 msg="chain_offset 0, chain 0"
time="2022-08-03 01:01:48" level=notice pid=1280 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:01:48" level=notice pid=1280 msg="chain_offset 1, chain 1"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="chain_offset 2, chain 2"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="reset fpga"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="Begain check_fan_valiad"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:01:50" level=info pid=1280 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:01:50" level=notice pid=1280 msg="miner thread with 3 backend runtime created pid 1280"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="opt_algo 6, ltc"
time="2022-08-03 01:01:56" level=error pid=1280 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:56" level=error pid=1280 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:58" level=error pid=1280 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:58" level=error pid=1280 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:00" level=error pid=1280 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:00" level=error pid=1280 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:01" level=error pid=1280 msg="Data load fail for chain 2.
"
time="2022-08-03 01:02:01" level=error pid=1280 msg="Chain2 load EEPROM error."
time="2022-08-03 01:02:01" level=notice pid=1280 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:02:12" level=info pid=1510 msg="release version"
time="2022-08-03 01:02:12" level=info pid=1510 msg="asic mode"
time="2022-08-03 01:02:12" level=notice pid=1510 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:02:12" level=notice pid=1510 msg=platform_init
time="2022-08-03 01:02:12" level=info pid=1510 msg="mmap fpga_mem_addr_hal = 0xb5cbc000
"
time="2022-08-03 01:02:12" level=info pid=1510 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:02:12" level=notice pid=1510 msg="chain_offset 0, chain 0"
time="2022-08-03 01:02:13" level=notice pid=1510 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:02:13" level=notice pid=1510 msg="chain_offset 1, chain 1"
time="2022-08-03 01:02:14" level=notice pid=1510 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:02:14" level=notice pid=1510 msg="chain_offset 2, chain 2"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="reset fpga"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="Begain check_fan_valiad"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:02:15" level=info pid=1510 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:02:15" level=notice pid=1510 msg="miner thread with 3 backend runtime created pid 1510"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="opt_algo 6, ltc"
time="2022-08-03 01:02:21" level=error pid=1510 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:21" level=error pid=1510 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:23" level=error pid=1510 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:23" level=error pid=1510 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:25" level=error pid=1510 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:25" level=error pid=1510 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:26" level=error pid=1510 msg="Data load fail for chain 2.
"
time="2022-08-03 01:02:26" level=error pid=1510 msg="Chain2 load EEPROM error."
time="2022-08-03 01:02:26" level=notice pid=1510 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:02:37" level=info pid=1802 msg="release version"
time="2022-08-03 01:02:37" level=info pid=1802 msg="asic mode"
time="2022-08-03 01:02:37" level=notice pid=1802 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:02:37" level=notice pid=1802 msg=platform_init
time="2022-08-03 01:02:37" level=info pid=1802 msg="mmap fpga_mem_addr_hal = 0xb5cf6000
"
time="2022-08-03 01:02:37" level=info pid=1802 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:02:37" level=notice pid=1802 msg="chain_offset 0, chain 0"
time="2022-08-03 01:02:38" level=notice pid=1802 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:02:38" level=notice pid=1802 msg="chain_offset 1, chain 1"
time="2022-08-03 01:02:39" level=notice pid=1802 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:02:39" level=notice pid=1802 msg="chain_offset 2, chain 2"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="reset fpga"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="Begain check_fan_valiad"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:02:40" level=info pid=1802 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:02:40" level=notice pid=1802 msg="miner thread with 3 backend runtime created pid 1802"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="opt_algo 6, ltc"
time="2022-08-03 01:02:46" level=error pid=1802 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:46" level=error pid=1802 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:48" level=error pid=1802 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:48" level=error pid=1802 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:50" level=error pid=1802 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:50" level=error pid=1802 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:51" level=error pid=1802 msg="Data load fail for chain 2.
"
time="2022-08-03 01:02:51" level=error pid=1802 msg="Chain2 load EEPROM error."
time="2022-08-03 01:02:51" level=notice pid=1802 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:03:03" level=info pid=1940 msg="release version"
time="2022-08-03 01:03:03" level=info pid=1940 msg="asic mode"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:03:03" level=notice pid=1940 msg=platform_init
time="2022-08-03 01:03:03" level=info pid=1940 msg="mmap fpga_mem_addr_hal = 0xb5d4b000
"
time="2022-08-03 01:03:03" level=info pid=1940 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="chain_offset 0, chain 0"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="chain_offset 1, chain 1"
time="2022-08-03 01:03:04" level=notice pid=1940 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:03:04" level=notice pid=1940 msg="chain_offset 2, chain 2"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="reset fpga"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="Begain check_fan_valiad"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:03:05" level=info pid=1940 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:03:05" level=notice pid=1940 msg="miner thread with 3 backend runtime created pid 1940"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="opt_algo 6, ltc"
time="2022-08-03 01:03:11" level=error pid=1940 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:11" level=error pid=1940 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:13" level=error pid=1940 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:13" level=error pid=1940 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:15" level=error pid=1940 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:15" level=error pid=1940 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:16" level=error pid=1940 msg="Data load fail for chain 2.
"
time="2022-08-03 01:03:16" level=error pid=1940 msg="Chain2 load EEPROM error."
time="2022-08-03 01:03:16" level=notice pid=1940 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:03:28" level=info pid=2126 msg="release version"
time="2022-08-03 01:03:28" level=info pid=2126 msg="asic mode"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:03:28" level=notice pid=2126 msg=platform_init
time="2022-08-03 01:03:28" level=info pid=2126 msg="mmap fpga_mem_addr_hal = 0xb5d42000
"
time="2022-08-03 01:03:28" level=info pid=2126 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="chain_offset 0, chain 0"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="chain_offset 1, chain 1"
time="2022-08-03 01:03:29" level=notice pid=2126 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:03:29" level=notice pid=2126 msg="chain_offset 2, chain 2"
time="2022-08-03 01:03:30" level=notice pid=2126 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:03:30" level=notice pid=2126 msg="reset fpga"
time="2022-08-03 01:03:30" level=notice pid=2126 msg="Begain check_fan_valiad"
time="2022-08-03 01:03:31" level=notice pid=2126 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:03:31" level=notice pid=2126 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:03:31" level=info pid=2126 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:03:31" level=notice pid=2126 msg="miner thread with 3 backend runtime created pid 2126"
time="2022-08-03 01:03:31" level=notice pid=2126 msg="opt_algo 6, ltc"
time="2022-08-03 01:03:36" level=error pid=2126 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:36" level=error pid=2126 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:38" level=error pid=2126 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:38" level=error pid=2126 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:41" level=error pid=2126 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:41" level=error pid=2126 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:41" level=error pid=2126 msg="Data load fail for chain 2.
"
time="2022-08-03 01:03:41" level=error pid=2126 msg="Chain2 load EEPROM error."
time="2022-08-03 01:03:41" level=notice pid=2126 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:03:53" level=info pid=2476 msg="release version"
time="2022-08-03 01:03:53" level=info pid=2476 msg="asic mode"
time="2022-08-03 01:03:53" level=notice pid=2476 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:03:53" level=notice pid=2476 msg=platform_init
time="2022-08-03 01:03:53" level=info pid=2476 msg="mmap fpga_mem_addr_hal = 0xb5d55000
"
time="2022-08-03 01:03:53" level=info pid=2476 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:03:53" level=notice pid=2476 msg="chain_offset 0, chain 0"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 1, chain 1"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 2, chain 2"
time="2022-08-03 01:03:55" level=notice pid=2476 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:03:55" level=notice pid=2476 msg="reset fpga"
time="2022-08-03 01:03:55" level=notice pid=2476 msg="Begain check_fan_valiad"
time="2022-08-03 01:03:56" level=notice pid=2476 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:03:56" level=notice pid=2476 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:03:56" level=info pid=2476 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:03:56" level=notice pid=2476 msg="miner thread with 3 backend runtime created pid 2476"
time="2022-08-03 01:03:56" level=notice pid=2476 msg="opt_algo 6, ltc"
time="2022-08-03 01:04:01" level=error pid=2476 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:01" level=error pid=2476 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:03" level=error pid=2476 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:03" level=error pid=2476 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:06" level=error pid=2476 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:06" level=error pid=2476 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:06" level=error pid=2476 msg="Data load fail for chain 2.
"
time="2022-08-03 01:04:06" level=error pid=2476 msg="Chain2 load EEPROM error."
time="2022-08-03 01:04:06" level=notice pid=2476 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:04:18" level=info pid=2668 msg="release version"
time="2022-08-03 01:04:18" level=info pid=2668 msg="asic mode"
time="2022-08-03 01:04:18" level=notice pid=2668 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:04:18" level=notice pid=2668 msg=platform_init
time="2022-08-03 01:04:18" level=info pid=2668 msg="mmap fpga_mem_addr_hal = 0xb5daa000
"
time="2022-08-03 01:04:18" level=info pid=2668 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:04:18" level=notice pid=2668 msg="chain_offset 0, chain 0"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 1, chain 1"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 2, chain 2"
time="2022-08-03 01:04:20" level=notice pid=2668 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:04:20" level=notice pid=2668 msg="reset fpga"
time="2022-08-03 01:04:20" level=notice pid=2668 msg="Begain check_fan_valiad"
time="2022-08-03 01:04:21" level=notice pid=2668 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:04:21" level=notice pid=2668 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:04:21" level=info pid=2668 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:04:21" level=notice pid=2668 msg="miner thread with 3 backend runtime created pid 2668"
time="2022-08-03 01:04:21" level=notice pid=2668 msg="opt_algo 6, ltc"
time="2022-08-03 01:04:26" level=error pid=2668 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:26" level=error pid=2668 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:28" level=error pid=2668 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:28" level=error pid=2668 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:31" level=error pid=2668 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:31" level=error pid=2668 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:31" level=error pid=2668 msg="Data load fail for chain 2.
"
time="2022-08-03 01:04:31" level=error pid=2668 msg="Chain2 load EEPROM error."
time="2022-08-03 01:04:31" level=notice pid=2668 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:04:43" level=info pid=2808 msg="release version"
time="2022-08-03 01:04:43" level=info pid=2808 msg="asic mode"
time="2022-08-03 01:04:43" level=notice pid=2808 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:04:43" level=notice pid=2808 msg=platform_init
time="2022-08-03 01:04:43" level=info pid=2808 msg="mmap fpga_mem_addr_hal = 0xb5ce1000
"
time="2022-08-03 01:04:43" level=info pid=2808 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:04:43" level=notice pid=2808 msg="chain_offset 0, chain 0"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 1, chain 1"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 2, chain 2"
time="2022-08-03 01:04:45" level=notice pid=2808 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:04:45" level=notice pid=2808 msg="reset fpga"
time="2022-08-03 01:04:45" level=notice pid=2808 msg="Begain check_fan_valiad"
time="2022-08-03 01:04:46" level=notice pid=2808 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:04:46" level=notice pid=2808 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:04:46" level=info pid=2808 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:04:46" level=notice pid=2808 msg="miner thread with 3 backend runtime created pid 2808"
time="2022-08-03 01:04:46" level=notice pid=2808 msg="opt_algo 6, ltc"
time="2022-08-03 01:04:51" level=error pid=2808 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:51" level=error pid=2808 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:54" level=error pid=2808 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:54" level=error pid=2808 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:56" level=error pid=2808 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:56" level=error pid=2808 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:56" level=error pid=2808 msg="Data load fail for chain 2.
"
time="2022-08-03 01:04:56" level=error pid=2808 msg="Chain2 load EEPROM error."
time="2022-08-03 01:04:56" level=notice pid=2808 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:05:08" level=info pid=3002 msg="release version"
time="2022-08-03 01:05:08" level=info pid=3002 msg="asic mode"
time="2022-08-03 01:05:08" level=notice pid=3002 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:05:08" level=notice pid=3002 msg=platform_init
time="2022-08-03 01:05:08" level=info pid=3002 msg="mmap fpga_mem_addr_hal = 0xb5d46000
"
time="2022-08-03 01:05:08" level=info pid=3002 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:05:08" level=notice pid=3002 msg="chain_offset 0, chain 0"
time="2022-08-03 01:05:09" level=notice pid=3002 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:05:09" level=notice pid=3002 msg="chain_offset 1, chain 1"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="chain_offset 2, chain 2"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="reset fpga"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="Begain check_fan_valiad"
time="2022-08-03 01:05:11" level=notice pid=3002 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:05:11" level=notice pid=3002 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:05:11" level=info pid=3002 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:05:11" level=notice pid=3002 msg="miner thread with 3 backend runtime created pid 3002"
time="2022-08-03 01:05:11" level=notice pid=3002 msg="opt_algo 6, ltc"
time="2022-08-03 01:05:16" level=error pid=3002 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:16" level=error pid=3002 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:19" level=error pid=3002 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:19" level=error pid=3002 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:21" level=error pid=3002 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:21" level=error pid=3002 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:21" level=error pid=3002 msg="Data load fail for chain 2.
"
time="2022-08-03 01:05:21" level=error pid=3002 msg="Chain2 load EEPROM error."
time="2022-08-03 01:05:21" level=notice pid=3002 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:05:33" level=info pid=3091 msg="release version"
time="2022-08-03 01:05:33" level=info pid=3091 msg="asic mode"
time="2022-08-03 01:05:33" level=notice pid=3091 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:05:33" level=notice pid=3091 msg=platform_init
time="2022-08-03 01:05:33" level=info pid=3091 msg="mmap fpga_mem_addr_hal = 0xb5d7a000
"
time="2022-08-03 01:05:33" level=info pid=3091 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:05:33" level=notice pid=3091 msg="chain_offset 0, chain 0"
time="2022-08-03 01:05:34" level=notice pid=3091 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:05:34" level=notice pid=3091 msg="chain_offset 1, chain 1"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="chain_offset 2, chain 2"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="reset fpga"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="Begain check_fan_valiad"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:05:36" level=info pid=3091 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:05:36" level=notice pid=3091 msg="miner thread with 3 backend runtime created pid 3091"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="opt_algo 6, ltc"
time="2022-08-03 01:05:41" level=error pid=3091 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:41" level=error pid=3091 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:44" level=error pid=3091 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:44" level=error pid=3091 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:46" level=error pid=3091 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:46" level=error pid=3091 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:47" level=error pid=3091 msg="Data load fail for chain 2.
"
time="2022-08-03 01:05:47" level=error pid=3091 msg="Chain2 load EEPROM error."
time="2022-08-03 01:05:47" level=notice pid=3091 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:05:58" level=info pid=3321 msg="release version"
time="2022-08-03 01:05:58" level=info pid=3321 msg="asic mode"
time="2022-08-03 01:05:58" level=notice pid=3321 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:05:58" level=notice pid=3321 msg=platform_init
time="2022-08-03 01:05:58" level=info pid=3321 msg="mmap fpga_mem_addr_hal = 0xb5d95000
"
time="2022-08-03 01:05:58" level=info pid=3321 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:05:58" level=notice pid=3321 msg="chain_offset 0, chain 0"
time="2022-08-03 01:05:59" level=notice pid=3321 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:05:59" level=notice pid=3321 msg="chain_offset 1, chain 1"
time="2022-08-03 01:06:00" level=notice pid=3321 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:06:00" level=notice pid=3321 msg="chain_offset 2, chain 2"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="reset fpga"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="Begain check_fan_valiad"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:06:01" level=info pid=3321 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:06:01" level=notice pid=3321 msg="miner thread with 3 backend runtime created pid 3321"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="opt_algo 6, ltc"
time="2022-08-03 01:06:07" level=error pid=3321 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:07" level=error pid=3321 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:09" level=error pid=3321 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:09" level=error pid=3321 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:11" level=error pid=3321 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:11" level=error pid=3321 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:12" level=error pid=3321 msg="Data load fail for chain 2.
"
time="2022-08-03 01:06:12" level=error pid=3321 msg="Chain2 load EEPROM error."
time="2022-08-03 01:06:12" level=notice pid=3321 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:06:23" level=info pid=3551 msg="release version"
time="2022-08-03 01:06:23" level=info pid=3551 msg="asic mode"
time="2022-08-03 01:06:23" level=notice pid=3551 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:06:23" level=notice pid=3551 msg=platform_init
time="2022-08-03 01:06:23" level=info pid=3551 msg="mmap fpga_mem_addr_hal = 0xb5d89000
"
time="2022-08-03 01:06:23" level=info pid=3551 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:06:23" level=notice pid=3551 msg="chain_offset 0, chain 0"
time="2022-08-03 01:06:24" level=notice pid=3551 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:06:24" level=notice pid=3551 msg="chain_offset 1, chain 1"
time="2022-08-03 01:06:25" level=notice pid=3551 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:06:25" level=notice pid=3551 msg="chain_offset 2, chain 2"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="reset fpga"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="Begain check_fan_valiad"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:06:26" level=info pid=3551 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:06:26" level=notice pid=3551 msg="miner thread with 3 backend runtime created pid 3551"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="opt_algo 6, ltc"
time="2022-08-03 01:06:32" level=error pid=3551 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:32" level=error pid=3551 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:34" level=error pid=3551 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:34" level=error pid=3551 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:36" level=error pid=3551 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:36" level=error pid=3551 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:37" level=error pid=3551 msg="Data load fail for chain 2.
"
time="2022-08-03 01:06:37" level=error pid=3551 msg="Chain2 load EEPROM error."
time="2022-08-03 01:06:37" level=notice pid=3551 msg=&q
Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc:
0
1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209340K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 20036K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xcf800000 - 0xff800000 ( 768 MB)
lowmem : 0xc0000000 - 0xcf000000 ( 240 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc090e410 (9242 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB)
.bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6964K (cd42d000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 322110083
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID C7CFF589-3D04-4ECB-B10E-70A73BA643A8, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 33/21, WL threshold: 4096, image sequence number: 183710239
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID FEDBFDD6-2CB2-4ED5-B170-449E62906392, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb051
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
random: nonblocking pool is initialized
===========================================Miner log===========================================
time="1970-01-01 00:00:10" level=info pid=879 msg="release version"
time="1970-01-01 00:00:10" level=info pid=879 msg="asic mode"
time="1970-01-01 00:00:10" level=notice pid=879 msg="algo ltc fan_control_mode 2"
time="1970-01-01 00:00:10" level=notice pid=879 msg=platform_init
time="1970-01-01 00:00:10" level=info pid=879 msg="mmap fpga_mem_addr_hal = 0xb5d21000
"
time="1970-01-01 00:00:10" level=info pid=879 msg="HARDWARE_VERSION = 0x2000b051
"
time="1970-01-01 00:00:10" level=notice pid=879 msg="chain_offset 0, chain 0"
time="1970-01-01 00:00:10" level=notice pid=879 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="1970-01-01 00:00:10" level=notice pid=879 msg="chain_offset 1, chain 1"
time="1970-01-01 00:00:11" level=notice pid=879 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="1970-01-01 00:00:11" level=notice pid=879 msg="chain_offset 2, chain 2"
time="1970-01-01 00:00:12" level=notice pid=879 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="1970-01-01 00:00:12" level=notice pid=879 msg="reset fpga"
time="1970-01-01 00:00:12" level=notice pid=879 msg="Begain check_fan_valiad"
time="1970-01-01 00:00:21" level=notice pid=879 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="1970-01-01 00:00:21" level=notice pid=879 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="1970-01-01 00:00:21" level=info pid=879 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48"
time="1970-01-01 00:00:21" level=notice pid=879 msg="miner thread with 3 backend runtime created pid 879"
time="1970-01-01 00:00:21" level=notice pid=879 msg="opt_algo 6, ltc"
time="1970-01-01 00:00:27" level=error pid=879 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="1970-01-01 00:00:27" level=error pid=879 msg="Data decode fail for chain 2.
"
time="1970-01-01 00:00:29" level=error pid=879 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="1970-01-01 00:00:29" level=error pid=879 msg="Data decode fail for chain 2.
"
time="1970-01-01 00:00:31" level=error pid=879 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="1970-01-01 00:00:31" level=error pid=879 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:00:34" level=error pid=879 msg="Data load fail for chain 2.
"
time="2022-08-03 01:00:34" level=error pid=879 msg="Chain2 load EEPROM error."
time="2022-08-03 01:00:34" level=notice pid=879 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:00:57" level=info pid=955 msg="release version"
time="2022-08-03 01:00:57" level=info pid=955 msg="asic mode"
time="2022-08-03 01:00:57" level=notice pid=955 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:00:57" level=notice pid=955 msg=platform_init
time="2022-08-03 01:00:57" level=info pid=955 msg="mmap fpga_mem_addr_hal = 0xb5d2f000
"
time="2022-08-03 01:00:57" level=info pid=955 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:00:57" level=notice pid=955 msg="chain_offset 0, chain 0"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 1, chain 1"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:00:58" level=notice pid=955 msg="chain_offset 2, chain 2"
time="2022-08-03 01:00:59" level=notice pid=955 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:00:59" level=notice pid=955 msg="reset fpga"
time="2022-08-03 01:00:59" level=notice pid=955 msg="Begain check_fan_valiad"
time="2022-08-03 01:01:00" level=notice pid=955 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:01:00" level=notice pid=955 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:01:00" level=info pid=955 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48"
time="2022-08-03 01:01:00" level=notice pid=955 msg="miner thread with 3 backend runtime created pid 955"
time="2022-08-03 01:01:00" level=notice pid=955 msg="opt_algo 6, ltc"
time="2022-08-03 01:01:05" level=error pid=955 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:05" level=error pid=955 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:08" level=error pid=955 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:08" level=error pid=955 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:10" level=error pid=955 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:10" level=error pid=955 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:10" level=error pid=955 msg="Data load fail for chain 2.
"
time="2022-08-03 01:01:10" level=error pid=955 msg="Chain2 load EEPROM error."
time="2022-08-03 01:01:10" level=notice pid=955 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:01:22" level=info pid=1144 msg="release version"
time="2022-08-03 01:01:22" level=info pid=1144 msg="asic mode"
time="2022-08-03 01:01:22" level=notice pid=1144 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:01:22" level=notice pid=1144 msg=platform_init
time="2022-08-03 01:01:22" level=info pid=1144 msg="mmap fpga_mem_addr_hal = 0xb5cc0000
"
time="2022-08-03 01:01:22" level=info pid=1144 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:01:22" level=notice pid=1144 msg="chain_offset 0, chain 0"
time="2022-08-03 01:01:23" level=notice pid=1144 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:01:23" level=notice pid=1144 msg="chain_offset 1, chain 1"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="chain_offset 2, chain 2"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:01:24" level=notice pid=1144 msg="reset fpga"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="Begain check_fan_valiad"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:01:25" level=info pid=1144 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:01:25" level=notice pid=1144 msg="miner thread with 3 backend runtime created pid 1144"
time="2022-08-03 01:01:25" level=notice pid=1144 msg="opt_algo 6, ltc"
time="2022-08-03 01:01:31" level=error pid=1144 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:31" level=error pid=1144 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:33" level=error pid=1144 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:33" level=error pid=1144 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:35" level=error pid=1144 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:35" level=error pid=1144 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:36" level=error pid=1144 msg="Data load fail for chain 2.
"
time="2022-08-03 01:01:36" level=error pid=1144 msg="Chain2 load EEPROM error."
time="2022-08-03 01:01:36" level=notice pid=1144 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:01:47" level=info pid=1280 msg="release version"
time="2022-08-03 01:01:47" level=info pid=1280 msg="asic mode"
time="2022-08-03 01:01:47" level=notice pid=1280 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:01:47" level=notice pid=1280 msg=platform_init
time="2022-08-03 01:01:47" level=info pid=1280 msg="mmap fpga_mem_addr_hal = 0xb5da1000
"
time="2022-08-03 01:01:47" level=info pid=1280 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:01:47" level=notice pid=1280 msg="chain_offset 0, chain 0"
time="2022-08-03 01:01:48" level=notice pid=1280 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:01:48" level=notice pid=1280 msg="chain_offset 1, chain 1"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="chain_offset 2, chain 2"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:01:49" level=notice pid=1280 msg="reset fpga"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="Begain check_fan_valiad"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:01:50" level=info pid=1280 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:01:50" level=notice pid=1280 msg="miner thread with 3 backend runtime created pid 1280"
time="2022-08-03 01:01:50" level=notice pid=1280 msg="opt_algo 6, ltc"
time="2022-08-03 01:01:56" level=error pid=1280 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:56" level=error pid=1280 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:01:58" level=error pid=1280 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:01:58" level=error pid=1280 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:00" level=error pid=1280 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:00" level=error pid=1280 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:01" level=error pid=1280 msg="Data load fail for chain 2.
"
time="2022-08-03 01:02:01" level=error pid=1280 msg="Chain2 load EEPROM error."
time="2022-08-03 01:02:01" level=notice pid=1280 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:02:12" level=info pid=1510 msg="release version"
time="2022-08-03 01:02:12" level=info pid=1510 msg="asic mode"
time="2022-08-03 01:02:12" level=notice pid=1510 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:02:12" level=notice pid=1510 msg=platform_init
time="2022-08-03 01:02:12" level=info pid=1510 msg="mmap fpga_mem_addr_hal = 0xb5cbc000
"
time="2022-08-03 01:02:12" level=info pid=1510 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:02:12" level=notice pid=1510 msg="chain_offset 0, chain 0"
time="2022-08-03 01:02:13" level=notice pid=1510 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:02:13" level=notice pid=1510 msg="chain_offset 1, chain 1"
time="2022-08-03 01:02:14" level=notice pid=1510 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:02:14" level=notice pid=1510 msg="chain_offset 2, chain 2"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="reset fpga"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="Begain check_fan_valiad"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:02:15" level=info pid=1510 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:02:15" level=notice pid=1510 msg="miner thread with 3 backend runtime created pid 1510"
time="2022-08-03 01:02:15" level=notice pid=1510 msg="opt_algo 6, ltc"
time="2022-08-03 01:02:21" level=error pid=1510 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:21" level=error pid=1510 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:23" level=error pid=1510 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:23" level=error pid=1510 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:25" level=error pid=1510 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:25" level=error pid=1510 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:26" level=error pid=1510 msg="Data load fail for chain 2.
"
time="2022-08-03 01:02:26" level=error pid=1510 msg="Chain2 load EEPROM error."
time="2022-08-03 01:02:26" level=notice pid=1510 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:02:37" level=info pid=1802 msg="release version"
time="2022-08-03 01:02:37" level=info pid=1802 msg="asic mode"
time="2022-08-03 01:02:37" level=notice pid=1802 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:02:37" level=notice pid=1802 msg=platform_init
time="2022-08-03 01:02:37" level=info pid=1802 msg="mmap fpga_mem_addr_hal = 0xb5cf6000
"
time="2022-08-03 01:02:37" level=info pid=1802 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:02:37" level=notice pid=1802 msg="chain_offset 0, chain 0"
time="2022-08-03 01:02:38" level=notice pid=1802 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:02:38" level=notice pid=1802 msg="chain_offset 1, chain 1"
time="2022-08-03 01:02:39" level=notice pid=1802 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:02:39" level=notice pid=1802 msg="chain_offset 2, chain 2"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="reset fpga"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="Begain check_fan_valiad"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:02:40" level=info pid=1802 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:02:40" level=notice pid=1802 msg="miner thread with 3 backend runtime created pid 1802"
time="2022-08-03 01:02:40" level=notice pid=1802 msg="opt_algo 6, ltc"
time="2022-08-03 01:02:46" level=error pid=1802 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:46" level=error pid=1802 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:48" level=error pid=1802 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:48" level=error pid=1802 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:50" level=error pid=1802 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:02:50" level=error pid=1802 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:02:51" level=error pid=1802 msg="Data load fail for chain 2.
"
time="2022-08-03 01:02:51" level=error pid=1802 msg="Chain2 load EEPROM error."
time="2022-08-03 01:02:51" level=notice pid=1802 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:03:03" level=info pid=1940 msg="release version"
time="2022-08-03 01:03:03" level=info pid=1940 msg="asic mode"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:03:03" level=notice pid=1940 msg=platform_init
time="2022-08-03 01:03:03" level=info pid=1940 msg="mmap fpga_mem_addr_hal = 0xb5d4b000
"
time="2022-08-03 01:03:03" level=info pid=1940 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="chain_offset 0, chain 0"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:03:03" level=notice pid=1940 msg="chain_offset 1, chain 1"
time="2022-08-03 01:03:04" level=notice pid=1940 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:03:04" level=notice pid=1940 msg="chain_offset 2, chain 2"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="reset fpga"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="Begain check_fan_valiad"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:03:05" level=info pid=1940 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:03:05" level=notice pid=1940 msg="miner thread with 3 backend runtime created pid 1940"
time="2022-08-03 01:03:05" level=notice pid=1940 msg="opt_algo 6, ltc"
time="2022-08-03 01:03:11" level=error pid=1940 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:11" level=error pid=1940 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:13" level=error pid=1940 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:13" level=error pid=1940 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:15" level=error pid=1940 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:15" level=error pid=1940 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:16" level=error pid=1940 msg="Data load fail for chain 2.
"
time="2022-08-03 01:03:16" level=error pid=1940 msg="Chain2 load EEPROM error."
time="2022-08-03 01:03:16" level=notice pid=1940 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:03:28" level=info pid=2126 msg="release version"
time="2022-08-03 01:03:28" level=info pid=2126 msg="asic mode"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:03:28" level=notice pid=2126 msg=platform_init
time="2022-08-03 01:03:28" level=info pid=2126 msg="mmap fpga_mem_addr_hal = 0xb5d42000
"
time="2022-08-03 01:03:28" level=info pid=2126 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="chain_offset 0, chain 0"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:03:28" level=notice pid=2126 msg="chain_offset 1, chain 1"
time="2022-08-03 01:03:29" level=notice pid=2126 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:03:29" level=notice pid=2126 msg="chain_offset 2, chain 2"
time="2022-08-03 01:03:30" level=notice pid=2126 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:03:30" level=notice pid=2126 msg="reset fpga"
time="2022-08-03 01:03:30" level=notice pid=2126 msg="Begain check_fan_valiad"
time="2022-08-03 01:03:31" level=notice pid=2126 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:03:31" level=notice pid=2126 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:03:31" level=info pid=2126 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:03:31" level=notice pid=2126 msg="miner thread with 3 backend runtime created pid 2126"
time="2022-08-03 01:03:31" level=notice pid=2126 msg="opt_algo 6, ltc"
time="2022-08-03 01:03:36" level=error pid=2126 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:36" level=error pid=2126 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:38" level=error pid=2126 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:38" level=error pid=2126 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:41" level=error pid=2126 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:03:41" level=error pid=2126 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:03:41" level=error pid=2126 msg="Data load fail for chain 2.
"
time="2022-08-03 01:03:41" level=error pid=2126 msg="Chain2 load EEPROM error."
time="2022-08-03 01:03:41" level=notice pid=2126 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:03:53" level=info pid=2476 msg="release version"
time="2022-08-03 01:03:53" level=info pid=2476 msg="asic mode"
time="2022-08-03 01:03:53" level=notice pid=2476 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:03:53" level=notice pid=2476 msg=platform_init
time="2022-08-03 01:03:53" level=info pid=2476 msg="mmap fpga_mem_addr_hal = 0xb5d55000
"
time="2022-08-03 01:03:53" level=info pid=2476 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:03:53" level=notice pid=2476 msg="chain_offset 0, chain 0"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 1, chain 1"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:03:54" level=notice pid=2476 msg="chain_offset 2, chain 2"
time="2022-08-03 01:03:55" level=notice pid=2476 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:03:55" level=notice pid=2476 msg="reset fpga"
time="2022-08-03 01:03:55" level=notice pid=2476 msg="Begain check_fan_valiad"
time="2022-08-03 01:03:56" level=notice pid=2476 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:03:56" level=notice pid=2476 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:03:56" level=info pid=2476 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:03:56" level=notice pid=2476 msg="miner thread with 3 backend runtime created pid 2476"
time="2022-08-03 01:03:56" level=notice pid=2476 msg="opt_algo 6, ltc"
time="2022-08-03 01:04:01" level=error pid=2476 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:01" level=error pid=2476 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:03" level=error pid=2476 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:03" level=error pid=2476 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:06" level=error pid=2476 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:06" level=error pid=2476 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:06" level=error pid=2476 msg="Data load fail for chain 2.
"
time="2022-08-03 01:04:06" level=error pid=2476 msg="Chain2 load EEPROM error."
time="2022-08-03 01:04:06" level=notice pid=2476 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:04:18" level=info pid=2668 msg="release version"
time="2022-08-03 01:04:18" level=info pid=2668 msg="asic mode"
time="2022-08-03 01:04:18" level=notice pid=2668 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:04:18" level=notice pid=2668 msg=platform_init
time="2022-08-03 01:04:18" level=info pid=2668 msg="mmap fpga_mem_addr_hal = 0xb5daa000
"
time="2022-08-03 01:04:18" level=info pid=2668 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:04:18" level=notice pid=2668 msg="chain_offset 0, chain 0"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 1, chain 1"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:04:19" level=notice pid=2668 msg="chain_offset 2, chain 2"
time="2022-08-03 01:04:20" level=notice pid=2668 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:04:20" level=notice pid=2668 msg="reset fpga"
time="2022-08-03 01:04:20" level=notice pid=2668 msg="Begain check_fan_valiad"
time="2022-08-03 01:04:21" level=notice pid=2668 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:04:21" level=notice pid=2668 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:04:21" level=info pid=2668 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:04:21" level=notice pid=2668 msg="miner thread with 3 backend runtime created pid 2668"
time="2022-08-03 01:04:21" level=notice pid=2668 msg="opt_algo 6, ltc"
time="2022-08-03 01:04:26" level=error pid=2668 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:26" level=error pid=2668 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:28" level=error pid=2668 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:28" level=error pid=2668 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:31" level=error pid=2668 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:31" level=error pid=2668 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:31" level=error pid=2668 msg="Data load fail for chain 2.
"
time="2022-08-03 01:04:31" level=error pid=2668 msg="Chain2 load EEPROM error."
time="2022-08-03 01:04:31" level=notice pid=2668 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:04:43" level=info pid=2808 msg="release version"
time="2022-08-03 01:04:43" level=info pid=2808 msg="asic mode"
time="2022-08-03 01:04:43" level=notice pid=2808 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:04:43" level=notice pid=2808 msg=platform_init
time="2022-08-03 01:04:43" level=info pid=2808 msg="mmap fpga_mem_addr_hal = 0xb5ce1000
"
time="2022-08-03 01:04:43" level=info pid=2808 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:04:43" level=notice pid=2808 msg="chain_offset 0, chain 0"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 1, chain 1"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:04:44" level=notice pid=2808 msg="chain_offset 2, chain 2"
time="2022-08-03 01:04:45" level=notice pid=2808 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:04:45" level=notice pid=2808 msg="reset fpga"
time="2022-08-03 01:04:45" level=notice pid=2808 msg="Begain check_fan_valiad"
time="2022-08-03 01:04:46" level=notice pid=2808 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:04:46" level=notice pid=2808 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:04:46" level=info pid=2808 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:04:46" level=notice pid=2808 msg="miner thread with 3 backend runtime created pid 2808"
time="2022-08-03 01:04:46" level=notice pid=2808 msg="opt_algo 6, ltc"
time="2022-08-03 01:04:51" level=error pid=2808 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:51" level=error pid=2808 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:54" level=error pid=2808 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:54" level=error pid=2808 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:56" level=error pid=2808 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:04:56" level=error pid=2808 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:04:56" level=error pid=2808 msg="Data load fail for chain 2.
"
time="2022-08-03 01:04:56" level=error pid=2808 msg="Chain2 load EEPROM error."
time="2022-08-03 01:04:56" level=notice pid=2808 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:05:08" level=info pid=3002 msg="release version"
time="2022-08-03 01:05:08" level=info pid=3002 msg="asic mode"
time="2022-08-03 01:05:08" level=notice pid=3002 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:05:08" level=notice pid=3002 msg=platform_init
time="2022-08-03 01:05:08" level=info pid=3002 msg="mmap fpga_mem_addr_hal = 0xb5d46000
"
time="2022-08-03 01:05:08" level=info pid=3002 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:05:08" level=notice pid=3002 msg="chain_offset 0, chain 0"
time="2022-08-03 01:05:09" level=notice pid=3002 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:05:09" level=notice pid=3002 msg="chain_offset 1, chain 1"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="chain_offset 2, chain 2"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="reset fpga"
time="2022-08-03 01:05:10" level=notice pid=3002 msg="Begain check_fan_valiad"
time="2022-08-03 01:05:11" level=notice pid=3002 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:05:11" level=notice pid=3002 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:05:11" level=info pid=3002 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:05:11" level=notice pid=3002 msg="miner thread with 3 backend runtime created pid 3002"
time="2022-08-03 01:05:11" level=notice pid=3002 msg="opt_algo 6, ltc"
time="2022-08-03 01:05:16" level=error pid=3002 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:16" level=error pid=3002 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:19" level=error pid=3002 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:19" level=error pid=3002 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:21" level=error pid=3002 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:21" level=error pid=3002 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:21" level=error pid=3002 msg="Data load fail for chain 2.
"
time="2022-08-03 01:05:21" level=error pid=3002 msg="Chain2 load EEPROM error."
time="2022-08-03 01:05:21" level=notice pid=3002 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:05:33" level=info pid=3091 msg="release version"
time="2022-08-03 01:05:33" level=info pid=3091 msg="asic mode"
time="2022-08-03 01:05:33" level=notice pid=3091 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:05:33" level=notice pid=3091 msg=platform_init
time="2022-08-03 01:05:33" level=info pid=3091 msg="mmap fpga_mem_addr_hal = 0xb5d7a000
"
time="2022-08-03 01:05:33" level=info pid=3091 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:05:33" level=notice pid=3091 msg="chain_offset 0, chain 0"
time="2022-08-03 01:05:34" level=notice pid=3091 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:05:34" level=notice pid=3091 msg="chain_offset 1, chain 1"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="chain_offset 2, chain 2"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:05:35" level=notice pid=3091 msg="reset fpga"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="Begain check_fan_valiad"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:05:36" level=info pid=3091 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:05:36" level=notice pid=3091 msg="miner thread with 3 backend runtime created pid 3091"
time="2022-08-03 01:05:36" level=notice pid=3091 msg="opt_algo 6, ltc"
time="2022-08-03 01:05:41" level=error pid=3091 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:41" level=error pid=3091 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:44" level=error pid=3091 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:44" level=error pid=3091 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:46" level=error pid=3091 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:05:46" level=error pid=3091 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:05:47" level=error pid=3091 msg="Data load fail for chain 2.
"
time="2022-08-03 01:05:47" level=error pid=3091 msg="Chain2 load EEPROM error."
time="2022-08-03 01:05:47" level=notice pid=3091 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:05:58" level=info pid=3321 msg="release version"
time="2022-08-03 01:05:58" level=info pid=3321 msg="asic mode"
time="2022-08-03 01:05:58" level=notice pid=3321 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:05:58" level=notice pid=3321 msg=platform_init
time="2022-08-03 01:05:58" level=info pid=3321 msg="mmap fpga_mem_addr_hal = 0xb5d95000
"
time="2022-08-03 01:05:58" level=info pid=3321 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:05:58" level=notice pid=3321 msg="chain_offset 0, chain 0"
time="2022-08-03 01:05:59" level=notice pid=3321 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:05:59" level=notice pid=3321 msg="chain_offset 1, chain 1"
time="2022-08-03 01:06:00" level=notice pid=3321 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:06:00" level=notice pid=3321 msg="chain_offset 2, chain 2"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="reset fpga"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="Begain check_fan_valiad"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:06:01" level=info pid=3321 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:06:01" level=notice pid=3321 msg="miner thread with 3 backend runtime created pid 3321"
time="2022-08-03 01:06:01" level=notice pid=3321 msg="opt_algo 6, ltc"
time="2022-08-03 01:06:07" level=error pid=3321 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:07" level=error pid=3321 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:09" level=error pid=3321 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:09" level=error pid=3321 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:11" level=error pid=3321 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:11" level=error pid=3321 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:12" level=error pid=3321 msg="Data load fail for chain 2.
"
time="2022-08-03 01:06:12" level=error pid=3321 msg="Chain2 load EEPROM error."
time="2022-08-03 01:06:12" level=notice pid=3321 msg="Error! Chain [2] EEPROM data corrupted"
time="2022-08-03 01:06:23" level=info pid=3551 msg="release version"
time="2022-08-03 01:06:23" level=info pid=3551 msg="asic mode"
time="2022-08-03 01:06:23" level=notice pid=3551 msg="algo ltc fan_control_mode 2"
time="2022-08-03 01:06:23" level=notice pid=3551 msg=platform_init
time="2022-08-03 01:06:23" level=info pid=3551 msg="mmap fpga_mem_addr_hal = 0xb5d89000
"
time="2022-08-03 01:06:23" level=info pid=3551 msg="HARDWARE_VERSION = 0x2000b051
"
time="2022-08-03 01:06:23" level=notice pid=3551 msg="chain_offset 0, chain 0"
time="2022-08-03 01:06:24" level=notice pid=3551 msg="chain_offset 0, chain 0, pic firmware verion = 0xfe"
time="2022-08-03 01:06:24" level=notice pid=3551 msg="chain_offset 1, chain 1"
time="2022-08-03 01:06:25" level=notice pid=3551 msg="chain_offset 1, chain 1, pic firmware verion = 0xfe"
time="2022-08-03 01:06:25" level=notice pid=3551 msg="chain_offset 2, chain 2"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="chain_offset 2, chain 2, pic firmware verion = 0xfe"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="reset fpga"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="Begain check_fan_valiad"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="check_fan_valiad, check_fan_speed ok, fan_num = 4"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="Miner compile time: Mon Jan 24 16:01:20 CST 2022 type: Antminer L7"
time="2022-08-03 01:06:26" level=info pid=3551 msg="godminer Version = 0xB051 1.0.0_release_dirty_master_4c4db04fc8fb8ce1a21da1db2301f261664943c2_Jan 24 2022 16:18:48
time="2022-08-03 01:06:26" level=notice pid=3551 msg="miner thread with 3 backend runtime created pid 3551"
time="2022-08-03 01:06:26" level=notice pid=3551 msg="opt_algo 6, ltc"
time="2022-08-03 01:06:32" level=error pid=3551 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:32" level=error pid=3551 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:34" level=error pid=3551 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:34" level=error pid=3551 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:36" level=error pid=3551 msg="EEPROM eeprom_key_version or eeprom_encryption_algorithm error! eeprom_key_version:15, eeprom_encryption_algorithm
time="2022-08-03 01:06:36" level=error pid=3551 msg="Data decode fail for chain 2.
"
time="2022-08-03 01:06:37" level=error pid=3551 msg="Data load fail for chain 2.
"
time="2022-08-03 01:06:37" level=error pid=3551 msg="Chain2 load EEPROM error."
time="2022-08-03 01:06:37" level=notice pid=3551 msg=&q
I would like to know why this error occurs? How to avoid it?
Jump to: