Error Code 43 Video Card XFX Radeon 580 4GB

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: leonix007 on April 08, 2018, 08:56:30 PM

Hi bro, been noticed this after reading again your first post

Quote

I have connected only the 4GB graphics card and still the same issue.
The 4GB graphics card is the only one that it is not working

Have you tried installing only the 4GB graphics card in PCIe x16 slot on mboard? exclude all risers and other GPU's just to isolate your prob

if you already did this and you still got an error, I supposed, you had a bad GPU card

I guess the 4GB graphics card is wrong because it doesnt work.

So now Im having a new issue.

Before I made all changes and sugestions given on this topic my rig was working ok without a monitor connected, so now if the rig doesnt have a monitor connected it doesnt start minig, neither I cant use Teamviewer because it just shows a black screem and It just shows the mouse cursor and nothing else.

When I connect the monitor it shows the normal screen in TeamViewer and it shows Claymore stopped. I have to close it and restart it to start the mining process and it start mining again.

What is wrong now?

I used to use my rig without a monitor connected Undecided

so now if It doesnt have a monitor conected it doesnt work Huh

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: dislorth on April 08, 2018, 08:14:45 PM

What can I do?

Hi bro, been noticed this after reading again your first post

Quote

I have connected only the 4GB graphics card and still the same issue.
The 4GB graphics card is the only one that it is not working

Have you tried installing only the 4GB graphics card in PCIe x16 slot on mboard? exclude all risers and other GPU's just to isolate your prob

if you already did this and you still got an error, I supposed, you had a bad GPU card

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: jillscarbrough on April 01, 2018, 09:53:24 AM

AB means Afterburner.

"For make sure use AB and set it to default setting."
Set it to the default setting, cause stock bios and modded one would be different on default AB setting.

where can I find the right blockchain version drivers for my XFX 580?
You can find it here:
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Tips: Install until extracting file only then ignore installation process (cancel it). Then update your RX 580 (4GB) driver manually from Device Manager, You driver file will be located in drive C, AMD/Packages/../.. (as default).

Edit: Then restart your system. Wink

I have downloaded te latest blockchain version drivers for my XFX 580: Radeon-Software-Adrenalin-18.3.4-c0326037-win10-64bit-180325_drvBETA

When I try to install it manually just for the 4GB graphics card It says that the graphics card is already updated with the latest drivers Huh

What can I do?

Quote from: xxcsu on April 01, 2018, 10:47:45 AM

What is your problem Huh

Download atikmdag patcher 1.4.6, run the program and hit YES button ( si in your case ) !!!!
atikmdag patcher not going to tell you if your card have a modded bios or not !!!
Its going to fix your driver issue , error code 43, if you bios is modded !!!
Simple and easy !!!

I have already downloaded atikmdag patcher 1.4.6 and patched my graphics cards but still the same issue Undecided

Look at this pictures:

What can I do?

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: xxcsu on April 01, 2018, 10:47:45 AM

What is your problem Huh Download atikmdag patcher 1.4.6, run the program and hit YES button ( si in your case ) !!!!
atikmdag patcher not going to tell you if your card have a modded bios or not !!!
Its going to fix your driver issue , error code 43, if you bios is modded !!!
Simple and easy !!!

Ok xxcsu thank you very much for clarifying my doubt.
I will patch my graphics card with atikmdag patcher 1.4.6.

Proton2233

sr. member

Activity: 434

Merit: 252

Quote from: xxcsu on April 01, 2018, 10:47:45 AM

Quote from: dislorth on April 01, 2018, 08:43:06 AM

Quote from: xxcsu on March 31, 2018, 10:53:25 PM

Quote from: xxcsu on March 31, 2018, 03:36:50 AM

Try to run AMD/ATI Pixel Clock Patcher, you can download from HERE

That card might have a modded bios, let us know if thats helped with error 43

I guess it doesn't have a modded bios:

Does it?

Quote from: mrstark89 on April 01, 2018, 08:31:24 AM

Run pixel clock patcher may help. I received error code 43 everytime I mod my card. Run pixel clock patcher then restart your rig and it'll work

Do you mean to run atikmdag patcher 1.4.6?

Should I run it to my graphics cards?

Please look at the link picture above.

What is your problem Huh

Download atikmdag patcher 1.4.6, run the program and hit YES button ( si in your case ) !!!!
atikmdag patcher not going to tell you if your card have a modded bios or not !!!
Its going to fix your driver issue , error code 43, if you bios is modded !!!
Simple and easy !!!

You're absolutely right. I just want to add that after installing the patch for the driver, the situation may happen again after I updated Windows. I always disable automatic updates Windows but sometimes critical updates bypass my bans. Forced update Windows 10 is the biggest problem for me.

xxcsu

hero member

Activity: 1498

Merit: 597

Quote from: dislorth on April 01, 2018, 08:43:06 AM

Quote from: xxcsu on March 31, 2018, 10:53:25 PM

Quote from: xxcsu on March 31, 2018, 03:36:50 AM

Try to run AMD/ATI Pixel Clock Patcher, you can download from HERE

That card might have a modded bios, let us know if thats helped with error 43

I guess it doesn't have a modded bios:

Does it?

Quote from: mrstark89 on April 01, 2018, 08:31:24 AM

Run pixel clock patcher may help. I received error code 43 everytime I mod my card. Run pixel clock patcher then restart your rig and it'll work

Do you mean to run atikmdag patcher 1.4.6?

Should I run it to my graphics cards?

Please look at the link picture above.

What is your problem Huh

Download atikmdag patcher 1.4.6, run the program and hit YES button ( si in your case ) !!!!
atikmdag patcher not going to tell you if your card have a modded bios or not !!!
Its going to fix your driver issue , error code 43, if you bios is modded !!!
Simple and easy !!!

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: jillscarbrough on April 01, 2018, 09:53:24 AM

Quote from: dislorth on April 01, 2018, 09:26:26 AM

Quote from: jillscarbrough on April 01, 2018, 09:16:24 AM

Quote from: dislorth on April 01, 2018, 08:43:06 AM

-snip-

Yes, Im using stock bios on each of my graphics cards, I have not moddifyed any of them.

When you say "For make sure use AB and set it to default setting" what do you mean? What does "AB" mean?

where can I find the right blockchain version drivers for my XFX 580?

Thank you in advance jillscarbrough

AB means Afterburner.

"For make sure use AB and set it to default setting."
Set it to the default setting, cause stock bios and modded one would be different on default AB setting.

where can I find the right blockchain version drivers for my XFX 580?
You can find it here:
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Tips: Install until extracting file only then ignore installation process (cancel it). Then update your RX 580 (4GB) driver manually from Device Manager, You driver file will be located in drive C, AMD/Packages/../.. (as default).

Edit: Then restart your system. Wink

Oh yes, Afterburner, I dont used it, Im using OverdriveNTool instead following suggestions from: "My rig get stuck lot of times a day and I think the problem is with Graphics Cards https://bitcointalksearch.org/topic/m.30292528" I was having issues with my rig Undecided

One member https://bitcointalksearch.org/topic/m.30304886 suggested me to follow this guide https://mining.help/ to set up each graphics card so I followed step by step and I set up each of them like this:

As it is explained on the guide. Roll Eyes

I will try downloading https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx and I will make a manually set up only for my RX 580 4GB graphics card

jillscarbrough

sr. member

Activity: 588

Merit: 335

Steady State Finance

Quote from: dislorth on April 01, 2018, 09:26:26 AM

Quote from: jillscarbrough on April 01, 2018, 09:16:24 AM

Quote from: dislorth on April 01, 2018, 08:43:06 AM

-snip-

Yes, Im using stock bios on each of my graphics cards, I have not moddifyed any of them.

When you say "For make sure use AB and set it to default setting" what do you mean? What does "AB" mean?

where can I find the right blockchain version drivers for my XFX 580?

Thank you in advance jillscarbrough

AB means Afterburner.

"For make sure use AB and set it to default setting."
Set it to the default setting, cause stock bios and modded one would be different on default AB setting.

where can I find the right blockchain version drivers for my XFX 580?
You can find it here:
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

Tips: Install until extracting file only then ignore installation process (cancel it). Then update your RX 580 (4GB) driver manually from Device Manager, You driver file will be located in drive C, AMD/Packages/../.. (as default).

Edit: Then restart your system. Wink

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: R0land on April 01, 2018, 09:29:55 AM

Uninstall drivers with ddu in safe mode ...
... reset the mainboard´s cmos ..
... maybe help.

Good luck Wink

I have already unistall and then reinstall drivers and still the same Undecided

R0land

jr. member

Activity: 208

Merit: 3

Uninstall drivers with ddu in safe mode ...
... reset the mainboard´s cmos ..
... maybe help.

Good luck Wink

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: jillscarbrough on April 01, 2018, 09:16:24 AM

Quote from: dislorth on April 01, 2018, 08:43:06 AM

I guess it doesn't have a modded bios:

Does it?

With 21 Mhs +++ after Compute mode, seem like your card running at stock bios. For make sure, use AB and set it to a default setting then take the pic, post here.

Error 43, most caused by a driver issue. Yes, you can try to patch the driver (even when you are running on stock bios). Or, load different driver (I suggesting blockchain version) for manually updating your 580 (4GB).

Yes, Im using stock bios on each of my graphics cards, I have not moddifyed any of them.

When you say "For make sure use AB and set it to default setting" what do you mean? What does "AB" mean?

where can I find the right blockchain version drivers for my XFX 580?

Thank you in advance jillscarbrough

jillscarbrough

sr. member

Activity: 588

Merit: 335

Steady State Finance

Quote from: dislorth on April 01, 2018, 08:43:06 AM

I guess it doesn't have a modded bios:

Does it?

With 21 Mhs +++ after Compute mode, seem like your card running at stock bios. For make sure, use AB and set it to a default setting then take the pic, post here.

Error 43, most caused by a driver issue. Yes, you can try to patch the driver (even when you are running on stock bios). Or, load different driver (I suggesting blockchain version) for manually updating your 580 (4GB).

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: xxcsu on March 31, 2018, 10:53:25 PM

Quote from: xxcsu on March 31, 2018, 03:36:50 AM

Try to run AMD/ATI Pixel Clock Patcher, you can download from HERE

That card might have a modded bios, let us know if thats helped with error 43

I guess it doesn't have a modded bios:

Does it?

Quote from: mrstark89 on April 01, 2018, 08:31:24 AM

Run pixel clock patcher may help. I received error code 43 everytime I mod my card. Run pixel clock patcher then restart your rig and it'll work

Do you mean to run atikmdag patcher 1.4.6?

Should I run it to my graphics cards?

Please look at the link picture above.

mrstark89

newbie

Activity: 284

Merit: 0

Run pixel clock patcher may help. I received error code 43 everytime I mod my card. Run pixel clock patcher then restart your rig and it'll work

xxcsu

hero member

Activity: 1498

Merit: 597

Quote from: xxcsu on March 31, 2018, 03:36:50 AM

Try to run AMD/ATI Pixel Clock Patcher, you can download from HERE

That card might have a modded bios, let us know if thats helped with error 43

BTC22

newbie

Activity: 322

Merit: 0

Everytime I had a code 43, it was because it didn't have enough power to the card

dislorth

jr. member

Activity: 48

Merit: 1

Quote from: jmigdlc99 on March 30, 2018, 11:43:55 PM

Thats a lot of screenshots. I only checked the first but i some possible reasons for your error would be:

1. you have a bad riser - try swapping risers and cables to see if it works.
2. your GPU has a bad bios mod - if you have the same GPU try copying the bios mod from the those that work

Each riser is working well even the one Im using with the 4GB grafics card
Can I copy bios mod from one of my 8G ones?
How can I do it?

Quote from: shibob on March 30, 2018, 11:47:54 PM

Code 43 typically regards to Driver or Riser. You may recheck on both: reinstall driver or check is there any faulty riser.

I have already Intalled and unistalled drivers ... even I have cheacked each riser and all of them are working ok

Quote from: akuci on March 31, 2018, 01:58:05 AM

In my case it was a faulty card. If it's good when pluged into x16 without the riser cable, then just swap the riser.

I have used a new riser and a riser which is working well with another card and it still not working

Quote from: leonix007 on March 31, 2018, 02:19:17 AM

Nah, guys check this issue, 5 cards detected only one shows a code 43

https://2.bp.blogspot.com/-obMMPfp98-U/Wr8EtJuvXSI/AAAAAAAAJIk/h7kBOfX4ejwtTRwQiRZMC6iPQxUxJhIRQCLcBGAs/s1600/Error-Codigo-43-10.png

@OP, enable 4g decoding in your bios

4G encoding is already activated

Quote from: swogerino on March 31, 2018, 02:53:30 AM

Enable 4g decoding yes since you have a new motherboard and also make sure to change the pcie configuration to x1 as the risers extend your card to x16 on the riser slot but the tiny part that fits in the motherboard is pciex1.

How can I switch the PCI config to X1?

Quote from: pickleburglar on March 31, 2018, 03:30:24 AM

did you mod the bios? If so you need the pixel clock patch tool.

No, the bios is original like it comes when you buy it... I havent changed it yet. Should I pixel clock path tool?

Quote from: xxcsu on March 31, 2018, 03:36:50 AM

Do you have a modded bios on your cards ? specially on the one what give you error 43 ?
Did you got that card used or brand new ?
If you did not flashed ( modded ) the bios on your cards, and you bought your RX580/4GB used or from different source, that card might have a modded bios and might was a customer return to that shop where you ordered from.
If this is the case try to use AMD/ATI Pixel Clock Patcher, you can download from HERE

(If you have a modded bios on your another cards, and just added the rx580/4GB to your system and modded the bios, then you need to run the AMD/ATI Pixel Clock Patcher again on your system.)

On those screenshot you posted ... each of your rx 580 cards mining ETH with 10MH/s Huh

?? Did you set your driver to compute mod Huh

You can use THIS TOOL to set each cards to compute mod with a few click

I have bought all grafics cards branded "new" but I bought Two 4GB Graphics Cards and four 8GB Graphics Cards, and the first 4GB Graphics card got damaged and I send it to the seller for a change but he didnt changed it be cause the didnt have mor grafics cards, so he gave me back the money of it.

No, I didnt modded bios... Should I do it?

I have already set graphics cards driverd to compute mod and ETH minig is now at 21 Mhs +++
Look at here:
https://4.bp.blogspot.com/-wwR1EY7u9PQ/Wr__XhAoBbI/AAAAAAAAJK4/2L_RZvos9X8rtrDAu4MmGjV7IpxPWaixACK4BGAYYCw/s1600/ETH-01.png

Is it ok?
Which speed should it have?

xxcsu

hero member

Activity: 1498

Merit: 597

Do you have a modded bios on your cards ? specially on the one what give you error 43 ?
Did you got that card used or brand new ?
If you did not flashed ( modded ) the bios on your cards, and you bought your RX580/4GB used or from different source, that card might have a modded bios and might was a customer return to that shop where you ordered from.
If this is the case try to use AMD/ATI Pixel Clock Patcher, you can download from HERE

(If you have a modded bios on your another cards, and just added the rx580/4GB to your system and modded the bios, then you need to run the AMD/ATI Pixel Clock Patcher again on your system.)

On those screenshot you posted ... each of your rx 580 cards mining ETH with 10MH/s Huh

?? Did you set your driver to compute mod Huh

You can use THIS TOOL to set each cards to compute mod with a few click

pickleburglar

newbie

Activity: 70

Merit: 0

did you mod the bios? If so you need the pixel clock patch tool.

swogerino

legendary

Activity: 3318

Merit: 1247

Bitcoin Casino Est. 2013

Enable 4g decoding yes since you have a new motherboard and also make sure to change the pcie configuration to x1 as the risers extend your card to x16 on the riser slot but the tiny part that fits in the motherboard is pciex1.

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Nah, guys check this issue, 5 cards detected only one shows a code 43

https://2.bp.blogspot.com/-obMMPfp98-U/Wr8EtJuvXSI/AAAAAAAAJIk/h7kBOfX4ejwtTRwQiRZMC6iPQxUxJhIRQCLcBGAs/s1600/Error-Codigo-43-10.png

@OP, enable 4g decoding in your bios

akuci

full member

Activity: 226

Merit: 100

In my case it was a faulty card. If it's good when pluged into x16 without the riser cable, then just swap the riser.

shibob

full member

Activity: 672

Merit: 154

Blockchain Evangelist.

Code 43 typically regards to Driver or Riser. You may recheck on both: reinstall driver or check is there any faulty riser.

jmigdlc99

sr. member

Activity: 784

Merit: 282

Thats a lot of screenshots. I only checked the first but i some possible reasons for your error would be:

1. you have a bad riser - try swapping risers and cables to see if it works.
2. your GPU has a bad bios mod - if you have the same GPU try copying the bios mod from the those that work

dislorth

jr. member

Activity: 48

Merit: 1

Hi guys
I'm having an issue with one of my graphics cards.
I have a Rig with 4 XFX Radeon RX 580 8GB graphics cards and 1 XFX Radeon RX 580 4GB card + Mobo Z270-A PRO + Intel Celeron G3930 + 8GB RAM + HD 120GB + EVGA 1000 Source G3 80 PLUS gold
The XFX Radeon RX 580 4GB graphics card is getting error 43
I have already uninstalled all graphics card drivers and reinstalled again and still the same issue.
I have already installed the latest drivers for my graphics cards and still the same issue.
I have connected only the 4GB graphics card and still the same issue.
The 4GB graphics card is the only one that it is not working

Can some one help solving this issue please?

I let you here some pictures of the issue I'm having and each step I have done:

https://2.bp.blogspot.com/-6tenuD0IGGI/Wr8Eth0BVtI/AAAAAAAAJIo/nKNFUIOXxSo-TR_607uZVEAJovA-9IOmACLcBGAs/s1600/Error-Codigo-43-11.png

Topic: Error Code 43 Video Card XFX Radeon 580 4GB (Read 325 times)