Topic: erupter blade for dummies.... im a dummy (Read 920 times)
Glad you got it going. Happy mining.
got it figured out with some help from the bitcoin.cz IRC.
thanks
thanks
what are you typing into the slush proxy?
I have the software running wirelessly and setup on my laptop.
Any your server address is the ip address of your laptop?
When going to the config page don't forget to add :8000 to the end. As that is the open port. e.g. 192.168.1.100:8000
When going to the config page don't forget to add :8000 to the end. As that is the open port. e.g. 192.168.1.100:8000
ok. no more fucking with wireless connections. i went and bought a 5port switch and now i have my laptop that is running the stratum, the blade, and internet connection all running into the switch.
the stratum is running but my blade keeps resetting every 2 1/2 min. it never connects to the pool.
my configuration is as follows:
IP : 192.168.1.201
Mask : 255.255.255.0
Gateway : 192.168.1.1
WEB Port : 8000
Primary DNS : 192.168.1.1
Secondary DNS : 211.148.192.141
Ports : 8332, 8332
Server addresses : 192.168.1.100, 192.168.1.100
user:pass : rffr.worker1:xxxx, rffr.worker1:xxxx
the stratum is running but my blade keeps resetting every 2 1/2 min. it never connects to the pool.
my configuration is as follows:
IP : 192.168.1.201
Mask : 255.255.255.0
Gateway : 192.168.1.1
WEB Port : 8000
Primary DNS : 192.168.1.1
Secondary DNS : 211.148.192.141
Ports : 8332, 8332
Server addresses : 192.168.1.100, 192.168.1.100
user:pass : rffr.worker1:xxxx, rffr.worker1:xxxx
is it possible to set this up wireless through my laptop?
In layman's
IP : Whatever you assigned
Mask : dont touch 255.255.255.0
Gateway : don't touch 192.168.1.1
Webport : I don't touch 8000
Primary DNS : I believe i didn't touch 192.168.1.1
Secondary DNS : I believe i didn't touch 211.148.192.141
Ports : 8332,8332
Server address : Your laptops IP address EG 192.168.1.2,192.168.1.2 (yes twice)
user:pass : username:password,username:password
IP : Whatever you assigned
Mask : dont touch 255.255.255.0
Gateway : don't touch 192.168.1.1
Webport : I don't touch 8000
Primary DNS : I believe i didn't touch 192.168.1.1
Secondary DNS : I believe i didn't touch 211.148.192.141
Ports : 8332,8332
Server address : Your laptops IP address EG 192.168.1.2,192.168.1.2 (yes twice)
user:pass : username:password,username:password
thanks for the call back
IP : 192.168.1.201
Mask : 255.255.255.0
Gateway : 192.168.1.101
Webport : 8000
Primary DNS : 192.168.1.254
Secondary DNS : 211.148.192.141
Ports : 3333, 3333
Server Address : stratum.bitcoin.cz:3333, stratum.bitcoin.cz:3333
User : username and password (mine)
i can only get the configuration page to come up after i set the static IP address to:
IPv4 : 192.168.1.100
Ipv4 : 192.168.1.1
In layman's
IP : Whatever you assigned
Mask : dont touch 255.255.255.0
Gateway : don't touch 192.168.1.1
Webport : I don't touch 8000
Primary DNS : I believe i didn't touch 192.168.1.1
Secondary DNS : I believe i didn't touch 211.148.192.141
Ports : 8332,8332
Server address : Your laptops IP address EG 192.168.1.2,192.168.1.2 (yes twice)
user:pass : username:password,username:password
IP : Whatever you assigned
Mask : dont touch 255.255.255.0
Gateway : don't touch 192.168.1.1
Webport : I don't touch 8000
Primary DNS : I believe i didn't touch 192.168.1.1
Secondary DNS : I believe i didn't touch 211.148.192.141
Ports : 8332,8332
Server address : Your laptops IP address EG 192.168.1.2,192.168.1.2 (yes twice)
user:pass : username:password,username:password
what do you have in each line on the config page?
ok. im getting a little frustrated. im new to this bitcoin/computer stuff but im a fast learner. i just need somebody to point me in the right direction.
i have a V2 erupter blade hooked up to the powersupply and im looking at the configuration page on my laptop. i have the IP changed to 192.168.1.201 like i have seen suggested.
i cant figure out what to do with the rest of the stuff.
im trying to connect to Slush's pool and i downloaded the stratum and got that running... i think.
all of this is being done via a laptop and wireless router... maybe thats my problem
can someone help me out in "layman's terms"?
i have a V2 erupter blade hooked up to the powersupply and im looking at the configuration page on my laptop. i have the IP changed to 192.168.1.201 like i have seen suggested.
i cant figure out what to do with the rest of the stuff.
im trying to connect to Slush's pool and i downloaded the stratum and got that running... i think.
all of this is being done via a laptop and wireless router... maybe thats my problem
can someone help me out in "layman's terms"?
Jump to: