It is usually normal for sotck GPUs to play at around that hashrate because you have not yet OVERCLOCKED or UNDERVOLTED your GPU.
But being that your GPU is an RX 580 NITRO PLUS, it is on the low side of stock hash rates. You probably got one with an elpida or micron memory. If you can still replace it i highly suggest you do so.
Topic: ETH low hash with RX 580 17 MH/s :( (Read 379 times)
It depends on your comfort level. I personally just oc and undervolt, I haven't flashed a card.
I was getting 18 mh's out the box. After flashing and overclocking + undervolting I was getting 28 mh's.. After AMD block chain drivers I got 31.8 mh's
Hello guys
I have build new mining rig with the following HW :
Motherboard - Asus primer Z270-A - with the latest bios update {version 1009 }
* modify in bios for GEN2
PSU - Corsair AX1200i
GPU - SAPPHIRE NITRO+ Radeon RX 580 8GD5 ---- > One card only for now.
RAM - 4GB
Windows 10 latest version 1709
For some reason I'm getting only 17 MH/s ! out of the box with out flash the GPU .
is it normal if do not flash my GPU ?
form what is saw after the flash people said that they have 24 mh/s and it go up to 27 mh/s ~
but Im to far from this number ,
what should i do ?
I will appreciate any suggestion
thx in advance
I have build new mining rig with the following HW :
Motherboard - Asus primer Z270-A - with the latest bios update {version 1009 }
* modify in bios for GEN2
PSU - Corsair AX1200i
GPU - SAPPHIRE NITRO+ Radeon RX 580 8GD5 ---- > One card only for now.
RAM - 4GB
Windows 10 latest version 1709
For some reason I'm getting only 17 MH/s ! out of the box with out flash the GPU .
is it normal if do not flash my GPU ?
form what is saw after the flash people said that they have 24 mh/s and it go up to 27 mh/s ~
but Im to far from this number ,
what should i do ?
I will appreciate any suggestion
thx in advance
Seems not normal, try these, Increase your clock thru wattman or install msi afterburner, give at least 1200 core clock and 2150 mem clock.
Hello guys
I have build new mining rig with the following HW :
Motherboard - Asus primer Z270-A - with the latest bios update {version 1009 }
* modify in bios for GEN2
PSU - Corsair AX1200i
GPU - SAPPHIRE NITRO+ Radeon RX 580 8GD5 ---- > One card only for now.
RAM - 4GB
Windows 10 latest version 1709
For some reason I'm getting only 17 MH/s ! out of the box with out flash the GPU .
is it normal if do not flash my GPU ?
form what is saw after the flash people said that they have 24 mh/s and it go up to 27 mh/s ~
but Im to far from this number ,
what should i do ?
I will appreciate any suggestion
thx in advance
I have build new mining rig with the following HW :
Motherboard - Asus primer Z270-A - with the latest bios update {version 1009 }
* modify in bios for GEN2
PSU - Corsair AX1200i
GPU - SAPPHIRE NITRO+ Radeon RX 580 8GD5 ---- > One card only for now.
RAM - 4GB
Windows 10 latest version 1709
For some reason I'm getting only 17 MH/s ! out of the box with out flash the GPU .
is it normal if do not flash my GPU ?
form what is saw after the flash people said that they have 24 mh/s and it go up to 27 mh/s ~
but Im to far from this number ,
what should i do ?
I will appreciate any suggestion
thx in advance
Jump to: