Etherdelta not working for me - help

yubsep

sr. member

Activity: 658

Merit: 251

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

The problem isn't your balance. I had this issue before with EtherDelta and have been solved by increasing Gas to 21 at least.

Darin2

newbie

Activity: 34

Merit: 0

Quote from: bitcoin.beda on March 06, 2018, 07:36:18 AM

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Do you have pending transaction? if yes, just increase youre gas price.
I already encounter that issue, when i have consecutive transactions with same gas fee but one of the pending transactions is still process in the blockchain, hope it helps and if update us if it is still occur

I use etherdelta, and no major issues i encounter.

That was during the clogged up network, many of us had problems then.
https://blockdrome.com/en/page/chart-transactions/

Some useful sites
https://www.reddit.com/r/EtherDelta/comments/72tctz/guide_how_to_cancel_a_pending_transaction/
https://ethgasstation.info/
https://etherscan.io/chart/pendingtx

And if we have now Forkdelta which is faster for use.

bitcoin.beda

member

Activity: 770

Merit: 11

quarkchain.io

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Do you have pending transaction? if yes, just increase youre gas price.
I already encounter that issue, when i have consecutive transactions with same gas fee but one of the pending transactions is still process in the blockchain, hope it helps and if update us if it is still occur

I use etherdelta, and no major issues i encounter.

giaykhen

newbie

Activity: 3

Merit: 0

same issue I encounter and the transactions go through after some time. Seems delays as said here ...

quality.crypto

member

Activity: 854

Merit: 10

Not only you, many people are facing the same situation with etherdelta because network is kept lagging and transaction confirmation are also taking lot time. Some time it is very frustrating we can't help it until they settle it.

btclegionario

member

Activity: 588

Merit: 35

I have Etherium showing in the Etherdelta wallet, but each time I try to buy something, it comes up with an error that I have insufficient funds. Gas us not the problem, as it doesn't matter how small the amount is but i think, the best way, is set gas at 21k

h0lybyte

hero member

Activity: 924

Merit: 511

In ether network, minimum gas to initiate a transaction is 0.001, as stated in OP, you have more than enough gas available in your wallet but the gas value you have set for transfer tokens to etherdelta is quite low, try to set it as default or increase as required by etherdelta. Gas works just like we require to pay in bitcoin transactions, so you would always pay sufficient gas to make a transfer

betlord90

hero member

Activity: 630

Merit: 500

Quote from: Nazarov on January 18, 2018, 08:53:23 AM

Delta is very unstable and it does not only you. I also have problems with its use

The correct one to say is all of us suffer for slowness of etherdelta.

Quote from: ice18 on January 19, 2018, 02:53:01 AM

This is common problem I encountered everytime I used etherdelta you may increase the gas price from 35-50 gwei and everything will run smoothly its weird because when I send ether to another wallet with as little as 10 gwei I got no problems but when I using ed you will need a lot of gas.

Maybe their system doesn't recover yet for the current ETH network problem that's why they had been still tied up for huge Gas Fee's but if you can't handle to see that maybe use the other site who doesn't required us to use huge gwei but I think it can make you do slow confirmation on your alt balances.

ice18

hero member

Activity: 2492

Merit: 542

This is common problem I encountered everytime I used etherdelta you may increase the gas price from 35-50 gwei and everything will run smoothly its weird because when I send ether to another wallet with as little as 10 gwei I got no problems but when I using ed you will need a lot of gas.

Avirunes

legendary

Activity: 3094

Merit: 1472

Quote from: miningguru on January 15, 2018, 12:25:01 PM

Not only many people are facing the same situation with etherdelta because may be because of previous hack and may be because of they need to secure more from the stupid hackers.

Wonder how this issue is related with hackers? Undecided

Error is network related and please note that ETHERDELTA has no access to your address in etherdelta. Reason why you might be getting that message is because exchanges do work on recommended fees which might be higher than your actual balance to pay the gas fees.

I would say copy the private key of that address from etherdelta and import it into other wallet.

Nazarov

full member

Activity: 362

Merit: 101

Delta is very unstable and it does not only you. I also have problems with its use

numpadxx5

full member

Activity: 431

Merit: 108

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

well i have the same problem even i have 0.005 balance for fee i have given that error messages i think there are network congestion , that result of slow transaction , it takes 3 days before my trasaction succeed.

erre

legendary

Activity: 1694

Merit: 1207

Quote from: miningguru on January 15, 2018, 12:25:01 PM

Not only many people are facing the same situation with etherdelta because may be because of previous hack and may be because of they need to secure more from the stupid hackers.

I can't find any news of any update going on, and there is no support. I know that we're hacked, but I supposed this is resolved now...

miningguru

full member

Activity: 1134

Merit: 103

Not only many people are facing the same situation with etherdelta because may be because of previous hack and may be because of they need to secure more from the stupid hackers.

carlfebz2

hero member

Activity: 2926

Merit: 722

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Setting out 9 gwei is really to low which Etherdelta would really give you that prompt regarding on that transaction. Better to set out higher gas. Usually I do set out 40-50 gwei depending if I'm in a rush I would set even more higher. For now I don't experience such problems regarding on selling or buying. Gas might be big but wont matter as long my trades are profitable then it would really be just fine.

babykika2027

full member

Activity: 715

Merit: 101

I agree with the others, I think you have to increase your GAS cost, before you can check the price of GAS, because gas price can change at any time, the last few days GAS price is high enough, maybe you need to increase your MEW balance,

Fafabol

member

Activity: 267

Merit: 11

Quote from: bmcorp on January 05, 2018, 08:29:47 PM

I have the same error since middle PM with metamask on ED...

Always a popup error message :
"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I hope it's not kitties again Angry

I didn't try with my ledger nano S (not yet configured, just received it yesterday). Anyone tried ?

It means that it's already process but the transaction hash can't be found. That also happened to me and when I got pissed off I forgot it then I came back the other morning then to my surprise it got transacted. Etherdelta is too congested so I'm used to it yet I just used it rarely now.

LaLegiste

full member

Activity: 434

Merit: 100

https://eloncity.io/

Quote from: erre on January 14, 2018, 11:40:40 AM

Quote from: Leamirra on January 14, 2018, 06:47:09 AM

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Hello! Have you been able to solve this problem? If at all of you it turned out, write the reason why there was such a situation.

Still didn't managed to solve it, I'm getting pretty frustrated, but I think it's etherdelta's problem.
Still waiting for some explanation...

i guess the problem was too low gas price you set. better check https://ethgasstation.info/ for safelow gas price before every transaction you make. ethereum network is too congested recently. safelow gas price wasn't lower than 20 gwei last week but today it varies from 5 to 10 gwei. so you'd better try to deposit right now, i think it's the best opportunity to make it cheap and fast these days. also don't forget that 200 000 gas limit is needed for tokens.

erre

legendary

Activity: 1694

Merit: 1207

Quote from: Leamirra on January 14, 2018, 06:47:09 AM

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Hello! Have you been able to solve this problem? If at all of you it turned out, write the reason why there was such a situation.

Still didn't managed to solve it, I'm getting pretty frustrated, but I think it's etherdelta's problem.
Still waiting for some explanation...

Leamirra

full member

Activity: 448

Merit: 116

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Hello! Have you been able to solve this problem? If at all of you it turned out, write the reason why there was such a situation.

dadandandadan

member

Activity: 86

Merit: 10

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

I think your problem is that your gas fee is too low. It says in myetherwallet that you must set your gas fee on a minimum amount of 21000 gwei or else you can't complete any transaction. I think 21000 gwei is equal to 0.0005 Eth or approximately 5$ its is use to cover up your transaction or we can simple called it a transaction fee or transfer fee.

vlast01

full member

Activity: 364

Merit: 105

Dolphins Finance TRUSTED FINANCE

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

The one thing that i notice that you did wrong is that you set your gas fee into 9
As you can see using mythetherwallet has a several rules in making any transactions. For some reason myetherwallet required you to have eth balance for you to cover the gas fee. It says that you should set your gas fee at an mininmum amount required which is 2100 gwei so just set your gas fee on 2100 gwei or higher for you to complete your hanged transactions.

erre

legendary

Activity: 1694

Merit: 1207

I even increased my eth to 0.02 but nothing Cry

Did someone managed to get some explanation or "official" answer?

simongoat

full member

Activity: 392

Merit: 102

I'm trying now with a ledger, leaving 0.02 for gas, putting gas up to 10 but its not working at all.

bmcorp

newbie

Activity: 10

Merit: 0

I have the same error since middle PM with metamask on ED...

Always a popup error message :
"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I hope it's not kitties again Angry

I didn't try with my ledger nano S (not yet configured, just received it yesterday). Anyone tried ?

slumdog79

newbie

Activity: 7

Merit: 0

Quote from: erre on January 04, 2018, 11:58:07 AM

Thank you for your responses.
Here is my address: 0xEf272D104D0f678ECEB3F9B63B055C5158dAf9F0 -- 0.014 ETH

I correctly imported it in etherdelta, I have ether and the connection is stable (Wi-Fi and 4g I tried both), but I still have the same problem. As far as I can see I have no stuck txs.
Tried to send directly tokens but coinomi dapps is not working.
Any idea of what I can do now? Maybe I can use myetherwallet? (Never used it)

I have the same problem, I am using metamask and I have in my ethereum wallet 0.037ETH. I guess is etherdelta's problem.

erre

legendary

Activity: 1694

Merit: 1207

Thank you for your responses.
Here is my address: 0xEf272D104D0f678ECEB3F9B63B055C5158dAf9F0 -- 0.014 ETH

I correctly imported it in etherdelta, I have ether and the connection is stable (Wi-Fi and 4g I tried both), but I still have the same problem. As far as I can see I have no stuck txs.
Tried to send directly tokens but coinomi dapps is not working.
Any idea of what I can do now? Maybe I can use myetherwallet? (Never used it)

Flickkk

full member

Activity: 434

Merit: 101

Bounty Detective

Maybe slow net.
or you access in some fake/phishing site bro.
always bookmark it man

AlexaSonda

full member

Activity: 504

Merit: 101

Quote from: erre on January 01, 2018, 04:09:46 AM

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

0.014 ether is enough for gas, I think your connection is bad. maybe you can try it later or restart your connection.

roadwell890

member

Activity: 490

Merit: 11

now the Ethereum network is busy, all transactions require a bigger GAS, even for ED sizes only, I prefer to install gas 20 and above, for faster transactions ...

and make sure your balance is more than 0.01 ETH,

zikabra

full member

Activity: 574

Merit: 139

Quote from: Idrisu on January 01, 2018, 11:58:50 AM

The simple cure for your problem with etherdelta is to increase your ethereum balance. The balance is not enough to cover your transactions fees or gas. I experienced this last week and I have to increase my ethereum balance before transactions go through. However, your situation may be a different one but the account balance really do contribute to how much you can actually transfer at a time.

He said he has 0.014eth in balance, it is more than enough to transfer tokens.
OP I think you have to transfer ether to etherdelta smart contract too.

Idrisu

sr. member

Activity: 924

Merit: 260

The simple cure for your problem with etherdelta is to increase your ethereum balance. The balance is not enough to cover your transactions fees or gas. I experienced this last week and I have to increase my ethereum balance before transactions go through. However, your situation may be a different one but the account balance really do contribute to how much you can actually transfer at a time.

erre

legendary

Activity: 1694

Merit: 1207

Nobody can give me a clue?
I used etherdelta in the past and no issues, the site may be slow sometimes but usually the tx was going trough without problems.

erre

legendary

Activity: 1694

Merit: 1207

Hi,
I imported an ether wallet with some tokens it it in etherdelta, but every time I try to deposit tokens to exchange I get this message:

"You tried to send an Ethereum transaction but there was an error. Make sure you have enough ETH in your "Wallet" column to pay for the gas fee. If you already have a pending transaction (enter your address on Etherscan to find out), please wait for it to confirm, or increase your "gas price" (in the upper right dropdown) and try again."

I have 0.014 ether on the address and setted 9 as gas price...what am I doing wrong?

Topic: Etherdelta not working for me - help (Read 394 times)