hi
did you manage to solve this issue?
i have the same issue. i have 2X MSI R9 280X cards and one is giving me around 18MH while is should give me more and the second is giving me an additional 4MH so either i am doing something wrong or the pool isnt showing the right MH (i am using nanopool).
which pool is recommended?
i tried to work with the proxy but it the ethminer isnt connection for some reason.
Topic: ethminer multi gpu setup (Read 4087 times)
Just to keep things simple to start, this line should be all you need:
You can add any additional parameters once you get the basic setup running.
Did you check Device Manager to see if all 3 GPUs are showing up? It should look like the image below, but with 3 just gpu's showing:
What is the amount of hash rate you are getting with 4 x R7 ?Code:
ethminer.exe --farm-recheck 200 -F -G http://eth-eu.dwarfpool.com:80/address/Worker1
You can add any additional parameters once you get the basic setup running.
Did you check Device Manager to see if all 3 GPUs are showing up? It should look like the image below, but with 3 just gpu's showing:
Around 60 mh/s, pool reports anywhere from 60-70, at current difficulty earning about 1.3 ETH/day on this rig.
Just to keep things simple to start, this line should be all you need:
You can add any additional parameters once you get the basic setup running.
Did you check Device Manager to see if all 3 GPUs are showing up? It should look like the image below, but with 3 just gpu's showing:
What is the amount of hash rate you are getting with 4 x R7 ? Code:
ethminer.exe --farm-recheck 200 -F -G http://eth-eu.dwarfpool.com:80/address/Worker1
You can add any additional parameters once you get the basic setup running.
Did you check Device Manager to see if all 3 GPUs are showing up? It should look like the image below, but with 3 just gpu's showing:
Just to keep things simple to start, this line should be all you need:
You can add any additional parameters once you get the basic setup running.
Did you check Device Manager to see if all 3 GPUs are showing up? It should look like the image below, but with 3 just gpu's showing:
Code:
ethminer.exe --farm-recheck 200 -F -G http://eth-eu.dwarfpool.com:80/address/Worker1
You can add any additional parameters once you get the basic setup running.
Did you check Device Manager to see if all 3 GPUs are showing up? It should look like the image below, but with 3 just gpu's showing:
Hello.
Add -t 3 in the line of ethermine.exe
And for the best hashing, I recomende use a PROXY version 0.0.5
Regards.
Antuam
Add -t 3 in the line of ethermine.exe
And for the best hashing, I recomende use a PROXY version 0.0.5
Regards.
Antuam
You may try --opencl-platform 1, if you have onboard GPU. Make sure the video driver is the latest, 15.7 or later.
ethminer.exe --farm-recheck 200 -F -G http://eth-eu.dwarfpool.com:80/address/Worker1 --cl-global-work 8192 --cl-local-work 128
hi guys
i have read lot of it, tried as well.... nothing
getting json-rpc all the time
i have bought 6 gpus 3+3 sepparate R9 380x
so 3 gpus per rig.
using windows 10, latest amd drivers, ethminer 0.9.41 genoil 1.0.4b3
bat file
setx GPU_MAX_ALLOC_PERCENT 99
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
ethminer.exe --farm-recheck 200 -F http://eth-eu.dwarfpool.com:80/address/Worker1 -G --opencl-platform 0 --cl-global-work 8192
tried commands -t 3, --opencl device 0,1,2
one card works fine
two...they work but sometimes not
Three , not at all. json error
thank you
i have read lot of it, tried as well.... nothing
getting json-rpc all the time
i have bought 6 gpus 3+3 sepparate R9 380x
so 3 gpus per rig.
using windows 10, latest amd drivers, ethminer 0.9.41 genoil 1.0.4b3
bat file
setx GPU_MAX_ALLOC_PERCENT 99
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
ethminer.exe --farm-recheck 200 -F http://eth-eu.dwarfpool.com:80/address/Worker1 -G --opencl-platform 0 --cl-global-work 8192
tried commands -t 3, --opencl device 0,1,2
one card works fine
two...they work but sometimes not
Three , not at all. json error
thank you
Jump to: