Topic: Ethos 1.3.0, need help lowering Nitro+ RX580 and Aorus RX580 (Read 211 times)
I was instructed to run the command from ethos distro irc channel. It worked. It got my power consumption down somewhat. Looking for more if possible, or until someone tells me it's enough already
I found no informations about source <(curl -s http://paste.ethosdistro.com/raw/qeticiribi"
Where did you get this ?
Where did you get this ?
anyone?
Hi all. I need some help lowering my rig utilization. I've been trying all sorts of combination. But I can't lower it significantly.
I have a the following config
1st PSU on the mining rig
HP PSU Platinum DPS-1200FB on breakout board on 220V (1040W)
Asrock H110 Pro BTC+
Core i3-7100
4 GB
7 Sapphire Nitro+ RX580, 8 GB Hynix
memory: 2200
core: 1130
vlt: 840
pwr: 2
2nd PSU on the same rig (865W)
HP PSU Platinum DPS-1200FB on breakout board on 220V
3 Sapphire Nitro+ RX580, 8 GB Hynix
3 Gigabyte Aorus RX580, 8 GB Hynix
memory: 2200
core: 1167
vlt: 850
pwr: 2
I somewhat feel there are still improvements that can be done. All Nitro+ cards mining at 30.2 and all Aorus cards mining at 30.5. I already run "source <(curl -s http://paste.ethosdistro.com/raw/qeticiribi" to get the first psu down to 1040W, otherwise, it will be 1130W or so. Please help.
I have a the following config
1st PSU on the mining rig
HP PSU Platinum DPS-1200FB on breakout board on 220V (1040W)
Asrock H110 Pro BTC+
Core i3-7100
4 GB
7 Sapphire Nitro+ RX580, 8 GB Hynix
memory: 2200
core: 1130
vlt: 840
pwr: 2
2nd PSU on the same rig (865W)
HP PSU Platinum DPS-1200FB on breakout board on 220V
3 Sapphire Nitro+ RX580, 8 GB Hynix
3 Gigabyte Aorus RX580, 8 GB Hynix
memory: 2200
core: 1167
vlt: 850
pwr: 2
I somewhat feel there are still improvements that can be done. All Nitro+ cards mining at 30.2 and all Aorus cards mining at 30.5. I already run "source <(curl -s http://paste.ethosdistro.com/raw/qeticiribi" to get the first psu down to 1040W, otherwise, it will be 1130W or so. Please help.
Jump to: