Good afternoon,
Have somebody any idea about what values I must to add in ethos for my GPU's (NVidia GeForce GTX 1060 6 Gb) to can under-volt my GPU's ? Current I use:
globalcore 2175
globalmem 4500
But I don't know what values and how to reduce energy consumer for GPU's.
I read that this type of GPU's can reach around of 23 Mh/s. Now I obtain only 20 GH/s ! Maybe the "energy" tune will increase hash and reduce energy consumed.
I mine Ethereum Clasic, and I want to mine also Monero.
I can use the same values of overclock for more currency ?
I waiting with very higher interest any advice with feedback or idea.
Thanks to all for support.
Topic: ethOS + NVidia GeForce GTX 1060 6Gb - Improve performance !? (Read 134 times)
First of all: Check the manufacturer of your VRAM.
The further course of action depends if your 1060's are equipped with SAMSUNG, MICRON or HYNIX memory.
That said, I'm leaving since I don't have ethOS. But I repeat: First rule for 1060 users: Check your VRAM brand.
Then, maybe then (if its not HYNIX) people can help you.
The further course of action depends if your 1060's are equipped with SAMSUNG, MICRON or HYNIX memory.
That said, I'm leaving since I don't have ethOS. But I repeat: First rule for 1060 users: Check your VRAM brand.
Then, maybe then (if its not HYNIX) people can help you.
Good afternoon,
First of all I must specified at the beginning that I am a beginner in mining.
Second, I have an rig made using ASUS Z270-P as motherboard, 16 GB RAM memory, as operating system I use ethOS, and as GPU I use 4 NVidia from Gigabyte (model 1060 - 6Gb). I use wallet made/create on MyEtherWallet and I mine Ethereum Classic (ETC). As pool I use nanopool.org.
The actual performance related to my GPU's (GeForce GTX 1060 6Gb) are resume to 68.1 hash for all 4 GPU's.
For this "performance" I don't change nothing on my default settings.
But I want to change the GPU's performance only under-volt and overclock GPU's without using BIOS modded. So, the settings use for mine are:
# -----My NANOPOOL Settings - ETC -----
globalminer etcminer
maxgputemp 85
stratumproxy enabled
proxywallet
proxypool1 etc-eu1.nanopool.org:19999
proxypool2 etc-eu1.nanopool.org:19999
# poolpass1 x
# poolpass2 x
poolemail
flags --cl-global-work 8192 --farm-recheck 200
# globalcore 1000
# globalmem 1250
globalfan 85
# globalpowertune 20
# autoreboot false
# custompanel publicsecret
# lockscreen enabled
# globaldesktop disabled
# globalname disabled
How I can change the settings in a way in which to increase the GPU's performance ? Also what command I must use (in terminal) to see the GPU's performance when mine ?
If somebody from community already have this type of GPU and already have it optimized only with this settings what values/characteristics use ?
I waiting your feedback with very higher interest your opinion/suggestions/advice !
Thank you in advance to all community for support.
Keep in touch !
First of all I must specified at the beginning that I am a beginner in mining.
Second, I have an rig made using ASUS Z270-P as motherboard, 16 GB RAM memory, as operating system I use ethOS, and as GPU I use 4 NVidia from Gigabyte (model 1060 - 6Gb). I use wallet made/create on MyEtherWallet and I mine Ethereum Classic (ETC). As pool I use nanopool.org.
The actual performance related to my GPU's (GeForce GTX 1060 6Gb) are resume to 68.1 hash for all 4 GPU's.
For this "performance" I don't change nothing on my default settings.
But I want to change the GPU's performance only under-volt and overclock GPU's without using BIOS modded. So, the settings use for mine are:
# -----My NANOPOOL Settings - ETC -----
globalminer etcminer
maxgputemp 85
stratumproxy enabled
proxywallet
proxypool1 etc-eu1.nanopool.org:19999
proxypool2 etc-eu1.nanopool.org:19999
# poolpass1 x
# poolpass2 x
poolemail
flags --cl-global-work 8192 --farm-recheck 200
# globalcore 1000
# globalmem 1250
globalfan 85
# globalpowertune 20
# autoreboot false
# custompanel publicsecret
# lockscreen enabled
# globaldesktop disabled
# globalname disabled
How I can change the settings in a way in which to increase the GPU's performance ? Also what command I must use (in terminal) to see the GPU's performance when mine ?
If somebody from community already have this type of GPU and already have it optimized only with this settings what values/characteristics use ?
I waiting your feedback with very higher interest your opinion/suggestions/advice !
Thank you in advance to all community for support.
Keep in touch !
Jump to: