Topic: EthOS Overclock Problems (Read 5375 times)
I just got some RX 470s that I'd like to over clock on ethOS but not sure where to begin. I have the latest Sapphire mining specific cards... Do you control the clock rates and memory speeds in the local.conf file?
So I've been running EthOS on stock settings for a few days now and getting around 24mhs with my Rx470's. I tried to overclock my cards today and when I do one of my cards goes to 28-29mhs and the other runs at 8-10mhs. Here is my config files I'm using.
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
Worker is your hostname.
mem 123456 1000 1001
mem 654321 1004 1005
This will set the mem for
Rig 123456
Gpu0 to 1000
Gpu1 to 1001
Rig 654321
Gpu0 to 1004
Gpu1 to 1005
This is used if you have a remote conf file. Local you just need to add the setting for that rig.
So would I do "globalclock 2000 2000" to overclock both cards?
i can never get my two rigs to over clock right with this System, so i leave it at defaults and do ok, at this point i have no interest in modding the bios or overclocking ( I know how to set up the files with the OS before anyone try's to explain to me how to ) i set it up to run off slush pool the other day after a few hours of trying because you have to set it up different then they tell you for that pool right now ...
I mine ZEC ...with two rigs at 4 cards each .I have two copy's of EthOS ,and plan to buy 2 more, I like the system a lot which runs more stable then windows 10 , Ive found not faster but a hell of a lot more stable ...
My only beef is support, i hate live chat, i feel like they are making fun of me or act like well they don't care,I should kiss there ass, I noticed last time i went to live chat for help, so i don't, unless it is a last resort ...
EThos is self to me is worth the 39 bucks we pay for it, they do keep it running and do updates as needed ... but there live support is very bad.
I mine ZEC ...with two rigs at 4 cards each .I have two copy's of EthOS ,and plan to buy 2 more, I like the system a lot which runs more stable then windows 10 , Ive found not faster but a hell of a lot more stable ...
My only beef is support, i hate live chat, i feel like they are making fun of me or act like well they don't care,I should kiss there ass, I noticed last time i went to live chat for help, so i don't, unless it is a last resort ...
EThos is self to me is worth the 39 bucks we pay for it, they do keep it running and do updates as needed ... but there live support is very bad.
So I've been running EthOS on stock settings for a few days now and getting around 24mhs with my Rx470's. I tried to overclock my cards today and when I do one of my cards goes to 28-29mhs and the other runs at 8-10mhs. Here is my config files I'm using.
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
Worker is your hostname.
mem 123456 1000 1001
mem 654321 1004 1005
This will set the mem for
Rig 123456
Gpu0 to 1000
Gpu1 to 1001
Rig 654321
Gpu0 to 1004
Gpu1 to 1005
This is used if you have a remote conf file. Local you just need to add the setting for that rig.
So I've been running EthOS on stock settings for a few days now and getting around 24mhs with my Rx470's. I tried to overclock my cards today and when I do one of my cards goes to 28-29mhs and the other runs at 8-10mhs. Here is my config files I'm using.
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
globaldriver amdgpu
globalmem 2000
globalpowertune 6
globalminer claymore
globalfan 75
maxgputemp 80
stratumproxy enabled
proxywallet 0xf95cbac66ada28d2b23d198c892479ad0c3a8b44
Proxypool1 us1-etc.ethermine.org:4444
proxypool2 us1-etc.ethermine.org:14444
flags --cl-global-work 8192 --farm-recheck 200
I've been reading on the EthOS FAQ about overclocking individual cards. The command in the config file is
mem [worker]: set the mem clock of individual GPUs on a single rig
But I'm not sure what to put in [worker]. How do I find out what worker is the GPU so I can manually overclock each card?
Jump to: