Maybe you could pm Crazyguy.I think he has a lot of experiece about habaneros.Or I could be wrong...
Hey pinhead, thanks for the insight. I found his profile and will see what he has to say
Topic: Experienced miners, please help. -BOUNTY- (Read 693 times)
Hey pinhead, thanks for the insight. I found his profile and will see what he has to say
Maybe you could pm Crazyguy.I think he has a lot of experiece about habaneros.Or I could be wrong...
Hello.
I am having an issue. I have a hashfast habanero board that has been hashing away for a while now. The other day, i wanted to mine something else (yes sha256 algo).
Set up my bat and started hashing. Went outside to have a smoke and when i came back in cgminer was spitting out some odd errors so i cut it off.
Now when i try to fire it back up i get:
ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():
HFA: OP_USB_INIT failed! Operation status 20 (Regulator programming error)
Turns into a zombie and just keeps resetting itslef. Cgminer recognizes the HFA device but keeps looping the error
I know that the RPE is lack of power but i have already been mining for a bit now and im using a 1000w psu.
Things i have done:
Cycled power
Uninstalled/reinstalled drivers/cgminer itself.
Switched usb ports on cpu and hfa board
Everything fires up fine, fans, lights. The cpu recognizes the device but it wont hash! I literally only switched which coin/pool i was mining.. THATS IT!
I will tip whoever can help me get this thing back up and running .01BTC (sorry dont have much)
or i will mine ethereum for you for 24hrs at 43mh (also not much, sorry)
I am not too experienced wih these asics. This is my first machine and i really enjoy it. Any help is appreciated.
I am having an issue. I have a hashfast habanero board that has been hashing away for a while now. The other day, i wanted to mine something else (yes sha256 algo).
Set up my bat and started hashing. Went outside to have a smoke and when i came back in cgminer was spitting out some odd errors so i cut it off.
Now when i try to fire it back up i get:
ERR: Asked to memcpy 0 bytes from usbutils.c _usb_read():
HFA: OP_USB_INIT failed! Operation status 20 (Regulator programming error)
Turns into a zombie and just keeps resetting itslef. Cgminer recognizes the HFA device but keeps looping the error
I know that the RPE is lack of power but i have already been mining for a bit now and im using a 1000w psu.
Things i have done:
Cycled power
Uninstalled/reinstalled drivers/cgminer itself.
Switched usb ports on cpu and hfa board
Everything fires up fine, fans, lights. The cpu recognizes the device but it wont hash! I literally only switched which coin/pool i was mining.. THATS IT!
I will tip whoever can help me get this thing back up and running .01BTC (sorry dont have much)
or i will mine ethereum for you for 24hrs at 43mh (also not much, sorry)
I am not too experienced wih these asics. This is my first machine and i really enjoy it. Any help is appreciated.
Jump to: