Topic: Exploit Antminer S9 and T9+ Firmware ASICBOOST original moded , FREE RELEASE ! (Read 2223 times)

Hi, I usually respond quickly to discord, and I assure help! there is no need to leave repeated messages;)

the link is up to date, you can also leave your comments to give your opinion on my mod, it could be nice, and it could help some people;)

to the pleasure

Thx.

I joined Discord but your link over there also seems to be not working.
Easyupload says: FILE NOT FOUND

Additionally which exact S9I firmware should I flash first as in the discussions various versions are mentioned.
Which one exactly is recommended?

Thx a lot.

hi, i edited link methode, now please join my discord for see links , is more easy, and if you need help is better for help you.

anyone have working links for this firmware?

Hello,

I still have an older S9I 14.5T laying around and would give the mod a try but all the links are no longer working.

Can you please kindly provide the links to the needed S9I firmware and to your mod file.

Thx a lot.

Hello, thank you for showing interest ... but, you have not read the thread ... look in more detail, I stipulate on several occasions that my mod does not contain BMMINER !!!

By design, no compilation;)

In fact, I see that no one actually reads lol, so too bad, everything is very clear in my mod, nothing hidden, there are only simple files like txt ... it suffices to open the files to see the "codes" ... give yourself a bit of trouble please: D (I'm talking about everyone there)

With pleasure

I think you did it similar to Alex from Romania, he explained it in a video on youtube and
showed how to change and compile the bminer two years ago.
https://www.youtube.com/watch?v=eD5F_KHkkqQ

Thank you: D, and I am also tired of often giving back the link, asking for a minimum of return, and people take advantage, without ever (or almost) saying thank you ... so, so tiring, why break my head honestly


but since I'm nice (or stupid), I updated the first post, and in addition, I even added a little feature to monitor the chips, something that I have for over 2 years, but I didn't 've never bothered to add it to my mod when I see the return number of my work lol

I have been watching this thread for a long time, you have made your point very clear, you did not modify the Bmminer and you only configured the minerconfig, you also proposed to send the files for them to check it, at this point I think you should ignore all of those who keep asking you the same question, I would also thank you for releasing this for free, you are such a great asset.

Keep up the good work.

T9+ links FILE NOT FOUND
 update pleas
thanks

Of course, but I don't have source code for this S9 mod, for good reason, which Bmminer is absolutely not modifying, and its you can check it with my mod, if you follow the procedure, you install a original firmware, then, my mod!

I invite you to open my mod, and see that it only contains VERY little! and certainly not to bmminer modify;)

thank you for giving me your opinion after checking;)

Did you ever release your "Mod code" - the source code so multiple sources can check it out? I found an old miner with some of your firmware on it but don't really want to mess with it unless I'm sure it's solid.

Hi, sorry about my late response.

But beware, although there is no risk, do not use the firmware for S9 (modify or not) because it is not planned for S9 Hydro, the S9 hydro has maps closer to the T9 + by design, and it just won't (or very, very badly) work!

I have the solution, as I have always claimed, there is a flaw in their "latest" firmware for the 9 series, and I have the solution ... here it is:

Please update to this version: https://file12.bitmain.com/shop-product/firmware/dcef60a1-f20f-48d0-9a90-f4c66dc74854/2019/09/24/19/Antminer-S9_Hydro-xilinx-201909201034-autofreq-user-Update2UBI-NF-sig_4038.tar.gz

once done, check that your miner works correctly ... then install my mod, initially planned for S9, but I bet 99% that it will work on the HYDRO, give me some time to modify it at the end of it make it compatible with hydro;)

EDIT : i have moded files for compatibility on S9 / S9J / S9I / T9+ / S9 Hydro !

link : https://easyupload.io/n0a5co (need install after flash "multi-option" factory firmware"

In this mod there is almost nothing, just the modify configuration page to display frequencies and voltage, and a file to force the miner to start in fixed mod!

So :
1 : install this on your S9 Hydro first :  https://file12.bitmain.com/shop-product/firmware/dcef60a1-f20f-48d0-9a90-f4c66dc74854/2019/09/24/19/Antminer-S9_Hydro-xilinx-201909201034-autofreq-user-Update2UBI-NF-sig_4038.tar.gz
2 : install my mod (keep settings enable) : https://easyupload.io/psf8wu

Thank you for leaving me your comments, that will make me happy;)

Most custom firmware is dedicated to those gears that are widely used, so for the S9 hydro, I don't think many people have that and that explains why most custom fm devs didn't bother to make a custom firmware for it.

I suppose you can use Vnish firmware for the Dual S9 which is basically just the normal S9 firmware but would accept 6 hash boards IIRC, so if thierry4wd can't help you with the S9 hydro you could try Vnisha (Asic.to / AwesomeMiner) you can also reach out to taserz aka asic.to and ask him about it.

I'm looking for a modified firmware for S9 Hydro (4x Hashboard) with AsicBoost. Preferably something similar to the modified fw for S9, which allows chip tuning.
But I don't see anything on the S9 Hydro. Theoretically, the fw for S9 Hydro could be derived from the firmware for T9 + which has similar connectors and I tried it. It's OK, but I can only use 3 Hashboards.
Thank you for your reply or for the link, recommendation ...

link not working, can you fix ?

Updated i built T9+ mod with bmminer opencore at 890mv(put in 2019 version), is very good for not over charge psu at start up ... by this, allowed to run T9+ at 725mhz by APW3

Please leave your result after testing

Hello, there is a link for the firmware of the T9 +? I only see for the S9
thx

Yes, my mod run good arround more than 1 years, but, no find BTC bloc, is possible to find only one bloc BTC on 1 years ? i don't know lol , but i find many bloc on shitcoin ... in absolut, is the OEM firmware ! i say and re say !!! 


Link updated

@OP
Have you tested this in the test net?

I don't know why my mod not find bloc ?

I have say what, just install original firmware (for S9J), and after, install my mod, so, my mod containe only new "minerconfig" page, and new booting file, for force miner to start at frequency fixed and take new config on config file (freq / fan / voltage) ...

In absolu , is ORIGINAL firmware ! not modified ! my mod is just a proof to bitmain say error on THIS firmware, bmminer is all coded to take all config !

 

anyone have proof of finding a block once they switch over to this modified FW?

that is my question with any of these firmwares once they are released.

Hi!

Download Links not working, File not found!

Could you re upload !

thanks for yours tests and comment

But is not my firmware, is just my "mod" for unlock feature on original firmware

With pleasure !

Here is the result of my testing. Your firmware works. However, I am getting lower hashrates compared to current firmware with a dev fee! I am downvolting the S9 for power saving.

On the current firmware I am using I have stable 9,4Th with the 720Watts drawn on a meter. Settings 445Mhz/8V Dev fee is 1,8% so I am getting effectively 9,2Th for me. This means 12,77 Gh/W efficiency.

I tested you firmware.It is fairly stable (one to two-hours each settings) at the following hashrates. Always 8V:
445Mhz 8.5Th with 686W, efficiency 12.3Gh/W
425Mhz 8.0Th with 644W, efficiency 12.42 Gh/W
375Mhz 7.7Th with 611W, efficiency 12.6Gh/W
350Mhz 7,5Th with 588W, efficiency 12.75Gh/W

Only at 350Mhz I am getting roughly the same efficiency, but I then I get 7.5Th, not 9.2Th... They did something in the custom dev-fee firmware that allows higher hashrates.

Nevertheless, your firmware is genuine Keep up the good work. I wonder how it would be with the newest bitmain firmware, but it is not possible to downwolt it without recompiling the "kernel module" C++ code - I am rookie so I do not remember the proper names.

UPDATED !

Please send your comment after test

When I click your download link in the 1st post, it says download expired on 09/01/2020.

I see a lot of downloads but no comments, I am disappointed!

Thierry4wd, would you reupload, please? Download expired. Much appreciated.

Hi !
Download links are not working, Can someone give valid download link ?
TNX.

EDITED !

Up ! FREE FOR ALL !!!

ENJOY !!!

I am a user of brains, currently and I confess that Bitmain is disgusting, currently, in the last S9 they sold from the J Series, they removed a chip, to block the writing of the Nand. Not only did they update the 2019 firmware, but they removed hardware to disable writing on the control board. They sell miners set at high voltages, when they can be more efficient, either by frequency or by voltage. It was the case of miners 12.93 Mhz, set over 9 volts and frequency of 600 Mhz (1450W to 1600 W). I admire the trajectory of kano, but I also congratulate the courage of thierry4wd. I think we shouldn't argue, we are on the same Team!

There is a way to patch BMMINER specifically to set fixed frequency and asicboost. Not sure how you can do voltage control increments since it's hardcoded per frequency range.

Hi, the proof is there, you criticized me without even reading me! it's too bad ...

In my first post I say that I do not have the source code for the simple reason that I use a BMMINER of origin! no change !!! therefore, you must ask for the sources at bitmain;)

The function of my "firmware" or rather "mod" is that I apel the function ask by another way ... at least in a few words ...

And as Taserz said I'm not a scammer, I help as I stink here!

Some random pm'd me a method of doing it that was using ida and a hex editor which yeah it kind of works I guess but they were not compiling it.

Where's the source code?

If you want to pm me your findings I can confirm it for you. My old firmware had it in there and I don't think your scamming personally since we went back and forth about firmware stuff a solid year ago. So I would be more than happy to confirm what you found is true. It's a bit tricky but a few have found it. What merit I hold on these forums is contained pretty much exclusively to the hardware and software section for btc mining so that should help your case.

Good ,

1: I offered to discover my firmware (you refused)
2: I said I was using an original Bmminer (you could have confirmed it)
3: you are as hard as the stone !!!
4: it's not like that you're going to advance science ...

Really not good ...

Come with me in PM and I prove to you that I'm not a scammer!
So before criticizing everything, thank you for questioning you ... you did a lot for the comunity to see what I see on the forum, but it does not give you the right to spit on everyone like his, have apel his RESPECT!

Thank you!

I swear I am the only one to not break the cgminer license when I released my firmware for free haha...

Granted my next release I am going to have to. Well more so I don't have the files to be able to make it open source cuz bitmain

No idea why a Mod would merit a post by someone who is breaking the cgminer license ... sigh ...

I see that you have some legitimate , so, i agree to send you one copy of voucher, test it, and send here result, you are ok ?

i am willing to examine the fw for anyone who has doubts.

Do you think about sell your source code?

UP : add support for T9+

Hi , You ready to try it !!! ? i sell you for free, only 3 files for proof is possible to modifi all spec without source ! i don't agree to critic without test i'm not a scamer !!! on hold time i'm help comunoty here

Thanks ! Amicaly

I am willing to take a vouch copy , I do not have a particular use for any custom firmware, don't really care about power consumption since my power is free, but i am willing to make a review on your "modified" firmware. pm me if you are interested.

Zwilla was a scammer who pretended he made the miner hash faster by using Fourier transforms ... i.e. confuse people with fake information.
He had a run of luck on my pool then claimed that the miners were lucky due to this bullshit.

Aside: His overall luck mining on my pool was below 100%

The code in the BM miners to shut them down was something I'd asked about long ago.
It was there for their datacentres and as far as I see it didn't actually work.
They removed it anyway about a year later when it got some traction from people complaining about it but not knowing anything about coding.

However, of course, I'm certainly anti BM - they have yet again released new miners that break the licence agreement of cgminer.
bmminer is just a modified cgminer

Hi, totally agree with all this affirmation! the community needs to find that I am not a scamer! and I assure you that my firmware is really in focus ... I know, like all the others would tell you, and you're right lol, but mine has the distinction of being strictly an original firmware, on which I 'calls the functions via some command;) but the software itself is in no way change, and therefore nothing hidden;)

You can have popularity here, and therefore can credibility, in all friendly wellssure! I do not criticize you!

I can offer you the single payment of 0.005btc, and once your detailed return to the community I will refund you;)

Hello

i will test it on a s9 (btc.com pool) and report. I would not copy or sell but i think some people here needs the answer

can we trust the original firmware of bitmain? the past has shown that we can not even with the manufacturer - see antbleed!
zwilla has found antbleed and other shit on bitmain firmware on some other miners like L3+, D3 etc.

maybe you can kano provide the firmware for testing?

the big problem is again and again GPLv3 but if originalfirmware is used without the data of bitmain to change and just add more then yes the injury remains at bitmain or?
and bitmain is not interested in GPLv3 - see all other miners ....

I understand ... but you do not know my skills ... I use flaws! if you master ssh, I can give you the files of my firmware, and you keep your BMMINER, all other file on my firmware is "text file" and all is clear you see....  and you will see ...

No one in their right mind would run a hack firmware that the hacker claims there's no need for source code ... and the functional claims require changes to the source code.

... and you want money for it ...

I understand your reaction, but look at my post I am not a noobie here;) to prove my good time I can give you a copy;)

You can't do some of those changes without changing the code.

Cleary a scam/hack - stay away from this everyone!

Hi all, I took a big decision, I decided to release my custom firmware for the symbolic sum of 0.005BTC WITHOUT ANY DEVFEE as often requested by the comunity ... a single purchase, has unfolded unlimited!
I know that once released, he will browse the web, thank you to try to respect my work with a purchase or a donation there after;), 0.005btc is not much ... I'm going in the direction from the community and I did not include any hidden fees;)

HI ALL !!! After reflextion, i take big decision, and KILL ALL firmware S9 !!! not paid for me ? is not simpaty for my work, not problem, so, S9 is now old machine, i take with pleasure donate  

Way for install this :
1 - you need unlocked firmware (before 2019) if not, downgrade by SD Card with T9+ firmware (see on bitmain.com)
2 - Install original firmware S9J mode low power/hashrate (containe the bmminer with full control coded, Yeah !!! error by bitmain)
3 - install my patch for take full control ! (contain bmminer not modified, if you want, open my patch and take only other files than bmminer by ssh for proof !) i included bmminer taked on S9J firmware only for more facility to flash on other miner)
4 - ENJOY !!! and thanks me lol

download link : S9 / S9I / S9J
- Original firmware for S9J (compatible with S9 / S9I / S9J) : Please download S9J 2018 firmware on bitmain, with low power mod
- My patch (need flash S9J firmware before) : https://discord.gg/JdQJ77X

download link : T9+
- Original firmware for T9+ ONLY : Please download T9+ 2018 firmware on bitmain, with low power mod
- My patch customised for T9+ (need flash flash T9+ firmware in the link for unlock all feature) : https://discord.gg/JdQJ77X

Release :

- Compatible with S9 / S9I / S9J (auto or not) and (T9+ available by other files)
- ASICBOOST (On / Off)
- ORIGINAL Bitmain Firmware
- NO DEV FEE !!!
- OVERCLOCK / UNDERCLOCK
- Frequency control
- Voltage board control (By increment 5mv)
- FAN Fixed / Auto
- Show PCB temp
- No Problem on all pool supported AsicBoost
- Is original firmware, absolut no problem for reflash other original firmware
- Same perform with all other custom firmware, TAKE FULL CONTROL ! down to 75w/th and up to 18,5th







Do not ask me the sources, I do not have them, for the good reason that I work with a BMMINER of origin bitmain (drawn in a firmware), then bypassed the system via the other file ... nothing 'is hidden

I am not a noobie here, have confidence in me;)

Ps : Kano, is for you !!! kiss !!! and now, all detractor, please stop broken my burns !!!  


Donate :

LTC : LgTLyhXEeF3p6oshxPwcacfCXezpdNXjhc
BTC : show on my firmware
DOGE : DKTK4bXwKLHEmcXc5SG81RecnfJkQa6NK1