Fan Replacements for Antminer S1 | Bitcointalksearch.org

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: argovian on July 25, 2014, 02:06:55 PM

I ended up picking up 2 of these to try them out. http://www.newegg.com/Product/Product.aspx?Item=N82E16835213010

After installation I saw a 10 degree decrease in temperature after sustained usage (~1h). They are much louder than the original bitmain fasn, but with the box fan I have running over the units also Its hardly noticeable. However, they put out a TON more air than the bitmain fans.

those are the best for air moved loud loud loud,but they will move serious air

argovian

member

Activity: 64

Merit: 10

I ended up picking up 2 of these to try them out. http://www.newegg.com/Product/Product.aspx?Item=N82E16835213010

After installation I saw a 10 degree decrease in temperature after sustained usage (~1h). They are much louder than the original bitmain fasn, but with the box fan I have running over the units also Its hardly noticeable. However, they put out a TON more air than the bitmain fans.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

just under clock them freq 275 and pencil mod them sooooo very easy cost zero.

see this thread

https://bitcointalksearch.org/topic/guide-undervolt-antminer-s1-119wgh-at-the-wall-526060

jimrome

sr. member

Activity: 434

Merit: 250

If cooling is your #1 priority check out the NMB 4715KL series: http://www.nmbtc.com/pdf/dcfans/4715kl.pdf. These types of fans are used in server environments, so don't expect any leds. They are not quiet, but they don't shriek like deltas either

You can find them in PWM version (4p lead) but most of the time I don't bother, the thermal control in the S1 is so unreliable that usually I just run them full scale anyways.

BitcoinHeroes

sr. member

Activity: 364

Merit: 250

I find external fan much better then case fan..

rammy2k2

legendary

Activity: 1974

Merit: 1003

i have mounted 2 silent fans with np when i had Ants , just make sure u keep them under 50 C

silverthornne

full member

Activity: 148

Merit: 100

SelfPay - ICO PRE SALE - huge Profit !

I use two of these on my S1 and have no complaints:

http://www.amazon.com/Cougar-Vortex-Cooling-CF-V12HPB-Black/dp/B008N323U6/ref=sr_1_1?s=electronics&ie=UTF8&qid=1405713942&sr=1-1&keywords=120mm+vortex+fan

Just watch it when screwing the front fan in as the fan isn't as deep so the screw can come into contact with one of the capacitors and pry it off (that actually happened to me as I wasn't being as careful as I should have been and had to solder it back in). I ended up using a cable tie for that particular screw slot. I don't overclock my S1 so I'm not sure if this solution would sustain an OC'ed device but it makes little to no noise with these two and hashes away at an average of 180 Gh/s 24 hours with no incidents. Of course, the room stays nice and warm though!

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: argovian on July 18, 2014, 03:39:38 PM

In monitoring the unit more it looks like the sounds is more pronounced when the fan is working harder.
I didnt notice this at home as I have the box fan blowing on the units.

My boss has let me put one in the office with the promise of allowing more if they are quiet enough. Hence, why I don't want to put in a box fan

I'll probably be upgrading the fan to see about keeping it working as quietly as possible.

In my experience the outside fan blowing toward the intake makes the whole setup quieter, and with that the internal fan works at less rpm and does not "whine" because it does not accelerate to higher rpm. Alternatively, people had attached a "pull" fan in front; just make sure the the airflow is directed to the outside with this fan. This setup did not work for me at all because temperatures inside the miner rose to 57-58oC, but perhaps I did not have patience to tinker with it more.
So, my personal preference is the regular fan blowing toward the intake. However, you know this already since you have this setup at home.

argovian

member

Activity: 64

Merit: 10

In monitoring the unit more it looks like the sounds is more pronounced when the fan is working harder.
I didnt notice this at home as I have the box fan blowing on the units.

My boss has let me put one in the office with the promise of allowing more if they are quiet enough. Hence, why I don't want to put in a box fan

I'll probably be upgrading the fan to see about keeping it working as quietly as possible.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: argovian on July 18, 2014, 01:00:00 PM

(because its making a weird noise and i'm worried it may go out).

That second fan looks good, but two things:

1. I had one fan making weird noise, but it all disappeared when i simply tightened up the screws on it (that connect it to the frame). the screws were loose.
2. What OP posted about a regular fan. It works.

argovian

member

Activity: 64

Merit: 10

Would this work then?

http://www.amazon.com/Koolance-120mm-38mm-Speed-FAN-12038HBK-184/dp/B0050UP8HK

temen

member

Activity: 119

Merit: 10

I hated that noise so i replaced one fan wih 2 arctic f12, one in front other in the back. Temps went up to 70-80 degrees but not much noise, they have been hashing like 3 months now like that, no problems.

And silently

solitude

hero member

Activity: 674

Merit: 500

I've had two out of four antminer fans die. I had some table fans lying around so I just placed the Antminer in front of it.

Biodom

legendary

Activity: 3892

Merit: 4331

Quote from: argovian on July 18, 2014, 01:00:00 PM

Is there a specific type of Fan required to put onto the Antminer S1?

I noticed from my Control page that the current fan is doing, 2820 (Frequency), which i assume is RPM.

Besides a 120mm Fan with a 4pin adapter, are there any other requirements if I was to replace the fan?
(because its making a weird noise and i'm worried it may go out).

I was considering something like this:
http://www.amazon.com/Prolimatech-Ultra-Sleek-Vortex-Mounting/dp/B00B1WQ4VA/ref=sr_1_14?s=pc&ie=UTF8&qid=1405706143&sr=1-14&keywords=120mm+fan

The fan that you quote will not work as it is only up to 1000rpm while antminer fan is capable of up to 3900 rpm.
You also need a fan with power management.

argovian

member

Activity: 64

Merit: 10

Is there a specific type of Fan required to put onto the Antminer S1?

I noticed from my Control page that the current fan is doing, 2820 (Frequency), which i assume is RPM.

Besides a 120mm Fan with a 4pin adapter, are there any other requirements if I was to replace the fan?
(because its making a weird noise and i'm worried it may go out).

I was considering something like this:
http://www.amazon.com/Prolimatech-Ultra-Sleek-Vortex-Mounting/dp/B00B1WQ4VA/ref=sr_1_14?s=pc&ie=UTF8&qid=1405706143&sr=1-14&keywords=120mm+fan

Topic: Fan Replacements for Antminer S1 (Read 1911 times)