Topic: Fan won't spin on Antminer S1 (Read 1023 times)
No luck with the reset button. Did I end up with a busted miner?
what i tried to do was setup my computers ip to have the same 3rd number as the miner. but it has to be the same 3rd number as the modem?
Yes you change the last numbers to something not already being used but do not change the others
what i tried to do was setup my computers ip to have the same 3rd number as the miner. but it has to be the same 3rd number as the modem?
My first miner is using 192.168.0.163 and my second one is setup to use 192.168.1.164 (since the default IP of the miner is 192.168.1.99)
it cannot use 192.168.1.164, it has to use 192.168.0.164 because they are on your 192.168.0.1 routerYes good catch Biodom!
Or was that a typo?
My first miner is using 192.168.0.163 and my second one is setup to use 192.168.1.164 (since the default IP of the miner is 192.168.1.99)
it cannot use 192.168.1.164, it has to use 192.168.0.164 because they are on your 192.168.0.1 router
Yes to both.
while the miner is running?
My first miner is using 192.168.0.163 and my second one is setup to use 192.168.1.164 (since the default IP of the miner is 192.168.1.99)
Ok have you checked to make sure that .164 is not being used by something else. I have Fing app on my phone to check. If not then I would push the miner reset button and start over with the factory settings to try and get started.
My first miner is using 192.168.0.163 and my second one is setup to use 192.168.1.164 (since the default IP of the miner is 192.168.1.99)
Are you using a different IP address for both?
After a heck of an ordeal getting my first antminer running. I plugged in my second and relized the fans wont spin but the lights do blink. I also can't get the antminer to show up on the network. I followed the exact same procedure as the first with no luck. Does anyone have an idea how to fix this issue and get my second antminer mining?
Jump to: