Author

Topic: Feeler: Selling 5x 5 GPU rigs, complete (Read 1277 times)

inh
full member
Activity: 155
Merit: 100
August 14, 2011, 11:34:52 AM
#16
Costs $60 to build yourself, not pre-built.

Anyways, this is a feeler thread, and the prices are negotiable. Thanks for giving me a feeling the prices are too high. I'll talk things over with the other party that has money in these systems and go from there.
full member
Activity: 182
Merit: 100
August 14, 2011, 11:31:47 AM
#15
I appreciate the breakdown, but show me where you can find a case that will hold 5 GPUs for $100 and keep those cards below 75c with the fans no higher than 70%. These cases are all hand made. Secondly, lets not forget that these systems are fully operational and come with 30 days support.

They aren't for everyone though, that's for sure.

https://bitcointalksearch.org/topic/guide-make-your-own-open-frame-rig-29729
costs 60 dollars I run it and it keeps them super cool.

Considering these are used it depreciates the value quite a bit. The only part in the case that you could ask retail for are the 5830's which are no where.

Used parts depreciate at least 10% but most likely 30%. Ill be nice and say 10%.

We'll keep the 5830's at 130 because that's a fair price for them used.

The rest of the stuff could cost around 700 new. 10% off that would be 630.

That makes the total 1,280 with out tech support.

Lets be honest putting systems together for anyone who knows how to use google is very simple and most likely you'll have to take it apart for the shipping process anyway so that shouldn't even be considered a feature. Next your not bestbuy you cant charge 600 dollars for tech support. To give you an example with dell you can get a 4 year 400 dollar warranty that allows for tech support, free replacement parts AND they will put it in your computer for you.

Will you honestly replace broken parts within the month? I doubt it.

For the kind of "tech support" your giving at most you could charge with out robbing some one is 50 dollars and even that is quite a lot.

My point being that you cant justify a 600 dollar mark up off retail prices when your selling used.
legendary
Activity: 1400
Merit: 1005
August 14, 2011, 11:30:21 AM
#14
Links? I'm curious now Smiley $100 isn't a bad price but these cases took me many many many hours to make.
Still isn't worth $700 premium on the price.  Well, actually more like $1000 premium, since, as other people pointed out, the hardware is used.
inh
full member
Activity: 155
Merit: 100
August 14, 2011, 11:24:01 AM
#13
Links? I'm curious now Smiley $100 isn't a bad price but these cases took me many many many hours to make.
newbie
Activity: 56
Merit: 0
August 14, 2011, 11:22:37 AM
#12
I got a case like that for $95..
full member
Activity: 154
Merit: 100
August 14, 2011, 11:20:07 AM
#11
I appreciate the breakdown, but show me where you can find a case that will hold 5 GPUs for $100 and keep those cards below 75c with the fans no higher than 70%. These cases are all hand made. Secondly, lets not forget that these systems are fully operational and come with 30 days support.

They aren't for everyone though, that's for sure.
a guy around here builds custom cases for $100....
inh
full member
Activity: 155
Merit: 100
August 14, 2011, 11:16:47 AM
#10
I appreciate the breakdown, but show me where you can find a case that will hold 5 GPUs for $100 and keep those cards below 75c with the fans no higher than 70%. These cases are all hand made. Secondly, lets not forget that these systems are fully operational and come with 30 days support.

They aren't for everyone though, that's for sure.
full member
Activity: 182
Merit: 100
August 14, 2011, 11:06:21 AM
#9
I decided to calculate the cost of the 5830 brand new. I had to guess on the case cost and mobo but I feel I was more then generous in those situations.

5*130-5830
12*5-extenders
280-psu
10-flash
150-mobo
10-ram
40-cpu
100-case
15*3-fan

total=1,345

Your asking for 2 grand for something that could cost 1,345 brand new. You also cant argue that you cant find 5830's anywhere because 6870's are the same card for 20 dollars more so at most it would cost 1,445.

Your asking around 600 more for a used computer. Like I said way over priced.
inh
full member
Activity: 155
Merit: 100
August 14, 2011, 09:22:22 AM
#8
First post updated with more specs and pics and other fun things. The 5850s do about 1.5 Gh/s and the 5830s do about 1.4 Gh/s.
newbie
Activity: 56
Merit: 0
August 14, 2011, 12:41:14 AM
#7
Also Pictures of the rigs in question.
member
Activity: 77
Merit: 10
August 14, 2011, 12:35:48 AM
#6
where are you currently located?


In the OP, it says near Springfield, MO.
sr. member
Activity: 350
Merit: 250
August 13, 2011, 11:51:10 PM
#5
where are you currently located?
newbie
Activity: 56
Merit: 0
August 13, 2011, 11:41:25 PM
#4
How much Mhashes/s per rig?

And how much is shipping?
inh
full member
Activity: 155
Merit: 100
August 13, 2011, 09:37:04 PM
#3
Prices are negotiable..

Not sure what other specs you would like. Cases are 17.75 inches wide by 8.5 inches high. They fit in 5U's of space very nicely. The 5850s are overclocked to various degrees, achieving between 300 and 400 Mh/s each. The 5830s are all stock. None of the cards have seen above 80c peak temps, and only then during testing. They never hit above 75c while running and usually run at or below 70c. Each case has three 120mm fans on the front and some cases have cutouts on the back for two 120mm exhaust fans, although they have been removed due to not being needed. Air is currently forced in via the front fans and is naturally pushed out through the rear openings, where it was exhausted and either wound up going to the inlet of the AC unit or exhausted outside.

edit: CPUs are all 2.7Ghz AMD Semprons, 1 gigabyte of ram.
full member
Activity: 182
Merit: 100
August 13, 2011, 09:24:02 PM
#2
Seems extremely overpriced. What are the exact specs?
inh
full member
Activity: 155
Merit: 100
August 13, 2011, 08:47:29 PM
#1
I have a move to Hawaii coming up and mining just isn't cost-efficient there. I have 5 systems here, with 5 GPUs each I would like to sell.

2 systems with 5x XFX 5850 - Does ~1.5 Gh/s - Would like to get $2500 USD each
3 systems with 5x Sapphire 5830s - Does about 1.4 Gh/s - Would like to get $2000 USD each

and I have one system with a mish-mash of GPUs that I'm going to hold on to a bit longer.

Each system has a gigabyte motherboard with 5 PCI slots, a custom aluminum case that holds all five cards, and extenders. Each is powered by Corsair AX1200 PSUs. These are gold rated 90+ efficiency. Black power button, red reset button, and a blue power LED on the front panel. These systems all run off of a 2 gigabyte thumbdrive. Some have 4 gig sticks in them, which will be included as well. CPUs are all 2.7Ghz AMD Semprons, 1 gigabyte of ram.  

Cases are 17.75 inches wide by 8.5 inches high. They fit in 5U's of space very nicely. The 5850s are overclocked to various degrees, achieving between 300 and 400 Mh/s each. The 5830s are all stock. None of the cards have seen above 80c peak temps, and only then during testing. They never hit above 75c while running and usually run at or below 70c. Each case has three 120mm fans on the front and some cases have cutouts on the back for two 120mm exhaust fans, although they have been removed due to not being needed. Air is currently forced in via the front fans and is naturally pushed out through the rear openings, where it was exhausted and either wound up going to the inlet of the AC unit or exhausted outside.

They are currently running a custom management script, but I will put something else on them when they are sold, one of the more widely used systems that has popped up on the forum in the last few weeks. Still undecided on which one I will use though. These systems all run Archlinux headless and start mining automatically upon boot.

Prices are negotiable. Located near Springfield, MO, USA. I will also offer 30 days of support once you receive the unit(s) although you probably wont need it. Not interested in parting out the systems.

You can view my OTC rating here: http://bitcoin-otc.com/viewratingdetail.php?nick=inh

Pics below. Not all systems have buttons and LEDs installed yet. The custom cables are made, just waiting for more buttons to get in:





During construction and testing:





I still have the original packaging for everything. Half of the systems have been running since early June, the other half have been running since late July:




parting out: https://bitcointalksearch.org/topic/wts-ax1200-1200-watt-psus-200-pci-e-cables-fans-motherboards-and-ram-37133
Jump to: