Topic: Firmware Antminer S9 / T9+ / L3+ / S17 / T17 / S17+ / T17+ / S17PRO (Read 171 times)

Full Featured! No Pay!

Up to 40% hashrate increasing using automatic profiles
LPM mode - up to 30% increasing power efficience using
Auto tuning of each chip allows for maximum performance

⚡️ Antminer T9 = 10.5Th (1-1,2w) / 12.9Th (1,5-1,6w) / 13.5Th (1,6+)
⚡️ Antminer S9 / S9i / S9j = 12th-950w / 14th-1190w / 16,2th-1433w / 17th-1573w
⚡️ Antminer T17 up to 51-56 Th / s (~ 2780-3300w)
⚡️ Antminer S17Pro 60-74Th / s (~ 2150-3300w)
⚡️ Antminer S17 (regular) up to 70-74Th / s (~ 3150-3300w)
⚡️ Antminer L3+ Up to 40% energy efficiency (L3 + 1.2 W / 1 Mh)

The firmware contains two equivalent DevFee accounts, one is yours and one is mine. Both about 1% of total hashrate.

The system works like this, you register on the slushpool or viabtc pool, send me a login, I enter your login into the firmware, I send you two firmware options, for the SD card and for WinSCP(allow remotely install), you flash your (or client's) ASICs and the commission of one of DevFee account goes to your login!

Since the income goes to a separate account, the firmware can be installed both on your own and on other people's devices, nothing changes for the client, his hash rate does not affected, just the commission does not go to the left, but to your pocket. From one S9 you get about 150-180GH, S17+ ~750GH

If you, for example, serve other people's farms, nothing changes for the owners of the farms, but you have additional income ...)

Now about viruses, etc.) You need to understand, firstly, I honestly say that one DevFee works for me, secondly, I am interested in making sure that everything works and does not lie, and thirdly, we look at the first point ...)

All functionality and stability are preserved. The firmware has already been tested and works on about 100 ASICs for about two month. Those who have doubts, you can drive on a separate machine, check with wireshark/mikrotik, etc.