Antminer S17, T17, and S9 free custom firmware! Actual individual chip tuning not fake like the others.
If you own a mining farm/hotel or have a large number of S17 or T17 500+ contact me for a better deal and to hear about our partnership program.
Asic.to has developed a firmware for the Antminer S17/S17 Pro and T17 Antminer. You can download and install it on your machine to improve your profits.
Antminer S17 / T17 Overclocking
Performance ~+30%
The ability to downvolt ~ 15-25%
Antminer S17(normal) to 70-
85-100th/s (~3100-3760-4000w)
Antminer T17 up to
65th/s (consumption ~ 3000W)
Antminer T17 Downvolts to 1900w at 42th/s -
45w/th(
Attention! Firmware is still new, in order to avoid breakdowns it is recommended to increase overclock slowly.)
FeaturesOverclocking: over
85th/s with
S17 and
65th/s T17!ASICboost and autotuning: On all of our versions include auto-tuning frequency to get the best efficiency as well as utilizing ASICboost.
Decrease Hardware ErrorsENERGY SAVINGNo BmminerImmersion-ready/Fan Disable: Support for high-efficiency liquid immersion cooling by disabling the fan in the settings.
Lower Thermal Threshold: Lowers default overheat protection to ensure machines last longer.
Full-farm deployment: Send out a configuration file to an unlimited number of miners on the same network. No reboot required!
Power monitoring: Built-in wattmeter function.
Search: Find Other Asic on the network.
Password Change: Ability to mass change passwords and ssh port.
Multi-ASIC roll-out: Setup one machine and install it on all of them with just 1 click.
Free – Download and begin using immediately. Small 2.8% fee to keep the project going.
Supports popular ASICs: Support for all Antminer
S17/T17,S9/S9i/S9j models.
Stable: Automated voltage tuning for best hashboard stability and performance.
Sleep Mode: Mining can stop and fans drop to normal speed using very little power.
Asic Virus Scanner: Tool that checks pre-owned asics for night switcher and other variants.
Easy UninstallationNotice you need to unlock SSH for the S17 and T17 models.
Click here for instructions on how to unlock SSH.Notice: When using chip Manual Tune. DO NOT increase chip frequency above 20% of base frequency of board. Just use AutoTune!!!
Please Take NoticeAs we all should know my now tampering with your machines can damage the machine. Do so at your own risk... But have fun! TO THE MOON
My Kia forte can do just over 100 miles an hour on a slight downhill straight way.
I did it one time. I don't push it.
Same with mining gear.
edit: I have been notified someone is possibly impersonating on telegram.
1) The autotune work has been finalized and fully adjusted.
2) Completely rewritten algorithm for adjusting the voltage of the chips.
3) Improved method for controlling unbalanced domains.
4) Adjusted and fully customized profiles.
5) Added compatibility with BTC Tools version 1.2.6.
6) Fixed config multiplier with batch propagating workers.
7) Added pool support for nicehash.com.
Cool Added pool support for warphash.com.
9) Checked and fixed stability of the emcd.io pool
New release, 0.9.8_beta for Antminer S17 & T17 models
What is done:
1. General stability
2. Extended and refactored the main driver.
3. The next iteration of refinement and improvement of errors (HW)
4. Hash rate loss on some pools was analyzed and fixed.
5. Added support for P2P pool.
6. Activated the multiplier for the distribution of mass batch configs.
7. Work on with the reading of temperature sensors I2C
8. Created more than 10 overclocking profiles.
9. Added autotune!!! (note, autotune results are saved in a separate config, when changing a profile to a new one and returning to the previous profile, a repeated autotune is not required, except for a forced retune by the user).
After the completion of the tune, “temporarily” changes to the chips in the manual section of gui are not displayed.
10. Autotune is taken out as a separate log in the profiles section.
11. Automatic reboot when unbalancing domains to save chips from burnout.
12. Added manual downgrade of the entire domain.
