Author

Topic: Firmware for WhatsMiner model M1-V1.2 - with ZYNQ mainboard. (Read 186 times)

newbie
Activity: 6
Merit: 0
Thank you for your help BitMaxz - I managed download firmware, find IP via software and hookup the unit for mining.
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
I tried to search but it seems there is no trusted source to download firmware for m1 with the ZYNQ control board.
But I have a link for an SD card image for the ZYNQ control board if you want then check this link below.
- https://drive.google.com/drive/folders/1WzMHgzkESUVtZfUy7mGnBo1xMScTAqGA

Or try to explore from this link below if you can find the upgrade firmware for your unit.
- https://drive.google.com/drive/folders/1bMsnUToHKmEpIvxoVyJCUqHpnArec952
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
No I havent updated firmware for the first Whatsminer generations (M1 ... M3X).
newbie
Activity: 6
Merit: 0
Check this out at the manufacturer (MicroBT) website:
https://www.microbt.com/server/firmware.html

Thank you for info - I checked them before but there is no option for ZYNQ version. Did you update firmware on this/similar unit before?
I believe that the only one option is via SD card (but maybe I'm wrong). I would like to check with someone who has experience with this.
My unit doesn't provide IP address - and my assumption is to update the firmware first.
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
Check this out at the manufacturer (MicroBT) website:
https://www.microbt.com/server/firmware.html
newbie
Activity: 6
Merit: 0
Hello.

Just quick question about information where could be possible to find firmware to the old WhatsMiner M1 unit (WhatsMiner model M1-V1.2 - with ZYNQ mainboard).

http://img1.garnek.pl/a.garnek.pl/036/314/36314140_800.0.jpg/zdjecie.jpg
http://img4.garnek.pl/a.garnek.pl/036/314/36314138_800.0.jpg/zdjecie.jpg
http://img4.garnek.pl/a.garnek.pl/036/314/36314136_800.0.jpg/zdjecie.jpg
Jump to: