First mining rig psu question | Bitcointalksearch.org

jackkiej

newbie

Activity: 12

Merit: 0

Thanks!
That is what I wanted to know

johncarpe64

sr. member

Activity: 420

Merit: 250

Quote from: jackkiej on February 17, 2014, 04:20:01 PM

Hi guys,

I want to build my first mining rig, and I've already bought all the parts I need, but I just want to be sure everything will work fine.
These are the parts I've bought:
- Gygabyte GA-990FXA
- SeaSonic X-1250 PSU (yes 1250W)
- AMD Sempron 145
- 4X Gigabyte R9 280X
- 4 usb powered risers (these)
- KINGSTON HyperX blu 2 x 2 GB DDR3-1600

I would like to know if 1250W is enough for this, on the extreme power supply calculator (http://www.extreme.outervision.com/psucalculatorlite.jsp) I came out on 1240W recommended..

Kind regards,

Jack

1250w should be enough even if you overclock alittle.

DrG

legendary

Activity: 2086

Merit: 1035

If you undervolt the 280X you should be able to run it 1-2 years no problem since each card would pull 250W or less leaving 250W for system and component degradation.

jackkiej

newbie

Activity: 12

Merit: 0

Hi guys,

I want to build my first mining rig, and I've already bought all the parts I need, but I just want to be sure everything will work fine.
These are the parts I've bought:
- Gygabyte GA-990FXA
- SeaSonic X-1250 PSU (yes 1250W)
- AMD Sempron 145
- 4X Gigabyte R9 280X
- 4 usb powered risers (these)
- KINGSTON HyperX blu 2 x 2 GB DDR3-1600

I would like to know if 1250W is enough for this, on the extreme power supply calculator (http://www.extreme.outervision.com/psucalculatorlite.jsp) I came out on 1240W recommended..

Kind regards,

Jack

Topic: First mining rig psu question (Read 639 times)