i looked up online and found this thread but download link seems to be dead
https://support.bitmain.com/hc/en-us/articles/221417268-Cannot-find-IP-of-miner ---- source
https://enforum.bitmain.com/bbs/topics/2891 ----- download links both dead
however i came across this guide from the official bitmain website
https://support.bitmain.com/hc/en-us/articles/360006020594-D3-Control-Board-Program-Recovery
the guide doesn't seem very clear to me and i just wanted to make sure that I've done everything right
what i did :
I downloaded Tools and Instructions to Image SD card.zip
https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image
unzip the folder and use "diskImager" to flash my microsd card using the "S2S4S5S7-img" file
i couldn't flash it at first getting " the filename directory name or volume label syntax is incorrect"
looked up online again and found that the .img file (S2S4S5S7-img) and "diskImager" shouldn't be on the same folder
moved (S2S4S5S7-img) to other folder ( desktop ) flashed it and it worked
then i downloaded " L3+、D3、A3-SD Tools.zip" , extracted it and copied to the microsd
after that I put the microsd in the control board turned it on and that was it ( it didn't work )
still couldn't find an ip address
if i did anything wrong if i forgot certain steps , please let me know ,
or you got any other methods that could help me find an ip address on these d3s , please let me know - enlighten me as well
