Topic: For those with 6970's still crunching @ 350MH.... read here (Read 1291 times)

in trix a setting of 1200 is equivalent to 300mhz memory.

Use MSI Afterburner. Make sure you modify the config-something file of MSI Afterburner and then happily downclock. The first time you open it you will be able to only go down to like 700mhz, do it and Apply. Close and reopen the program and surprise, you will be able to go down more.

Trixx doesn't work for memory underclocking for me.

I use AMD GPU clock tool to set the memory.

58xx cards have no problems running ram @300 or even lower, but I dont think you can do it with 6970s.

I heard that it can be done, but how?  No slider in Catalyst or Afterburner or TriXX that I've seen offers that.  Even directly typing 300 into the Mem settings of one of these programs does not hold, since its not in a valid range.

So how are people doing this?

You can happily underclock memory to like 300mhz, that will greatly reduce heat and consume, no need of 1375

I've today installed a new 6970, and had similar problems to many others trying to get the 40xMH speed that others are getting.

I've just managed to do that now, so I thought I'd post another more visible thread to help others.

I've tried different mining clients, although I started with GUIminer / Phoenix & have stayed with it in the end.

I've tried different flags, the usual options, stayed with these flags (nothing unusual in them):   -k phatk VECTORS BFI_INT FASTLOOP=false AGGRESSION=11.

I've OCed my card.  My original OC settings were:   Core  950 (increased to 1000 using Sapphire TriXX),  various Mem settings,  at first I increased voltage as well to various settings.
None of these OC helped me to jump to 40x MH.  When I was running @ 1000MH Core, I was crunching @ 365.

Then I read a thread talking about INC the Power Control Settings in Catalyst.  I was running Catalyst 11.8.    Setting is located in:  Performance / Graphics Overdrive / Power Control Settings.   I INC Power Control to +20 (what others had used), but that didn't help... nothing changed.

Then I tried looking for an upgrade to CCC (Catalyst).  I found 11.11, installed, INC Power Control, and it worked finally!
I had heard of others using different + settings from +5 ->  +20.  For me, all had the same effect, so I left my Catalyst Power Control on +10 for good measure.

I'm still OCing, settings I"m using:   

Core    950 (TriXX allows more, but Catalyst peaks @ 950 so I left it @ 950)
Mem    I underclocked Mem to min that Catalyst went to (1375MHz)
Fan      Controlled by TriXX


BTW, I picked up a "custom" phatk script from this thread ---  (in case it helps anyone)

"custom" phatk script - supposed to be better & more stable.
https://bitcointalksearch.org/topic/updated-phatkcl-file-for-guiminer-2-increase-stable-no-stales-44971

OK, good luck to all 6970 owners!  Enjoy 404 MHashing!!