[FS] All aluminum open-air frame for ONDA B250 motherboard (8 GPU)

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

This is what I assembled it to be:
https://imgur.com/ZyDO73L

I left one fan rail out; slightly different layout than your original intent I believe. I only had your websites assembly docs when I put it together cause BCT had the SSL error and I couldn't see my PM's.

You did send me a massive amount of hardware.... might wanna check you nut/bolt counts on the next one.... lol

I still have several M3-30+ screws etc. Not complaining though Wink

Might wanna make assembly instructions for this version.

Spotswood

sr. member

Activity: 512

Merit: 250

A "boxed in" version:

@JaredKaragen Wink

Spotswood

sr. member

Activity: 512

Merit: 250

Another variation, this time for all 12 GPUs and 2 ATX PSUs (mounted on edge, on the left).

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Hey spotswood; I would like one of these. I want the single stacked version with a boxed frame all the way around; so I assume its the original with all support beams. I just want it to be a cube of sorts for when its not in a rack case.

If you have an easy way for it to mount into a 4U slot; that's an option I would like added. I don't mind if the cards are facing 90* in the rack mount; I plan to have active cooling running from front to back of the rack anyways, so should be fine. I just want to be able to mount fans across the backs of the cards like your renders; but don't want a double-high unit like phil got.

If we are on the same page about what i want, send me a PM with a BTC address and a BTC amount to cover it being shipped to 95037; I'll transfer some funds your way when I get the PM =)

Raymond_B

member

Activity: 504

Merit: 71

Just Getting Started...

Hi Rich, I'd like to order an Onda B250 frame. Basically the exact same as what Phil has as I will be using the same 1070ti hybrid cards and a single PSU. Please let me know the total and I'll pay up. Thanks!

Fireballbu

newbie

Activity: 15

Merit: 0

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $75 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20, two for +$35 or four for +$50 (includes all required fasteners for 25mm thick fans).

Lead time is currently 5-6 business days.

Really great frame, very impressed with the build quality. Just wanted to check in and see if you were still building them and if you could sent one out to me?

I checked your website and didn't see the Onda B250 cases on there yet.

Spotswood

sr. member

Activity: 512

Merit: 250

Quote from: Raymond_B on January 07, 2018, 03:03:22 PM

Quote

Well, here's a model for one PSU (mounted near the IO area).

Another area to mount a second PSU could be added to the other/nearest side of the frame. Or, for others reading this, no areas to mount PSUs is also a possibility. Wink

What would pricing be for the model pictured and the 2 PSU setup? Sorry for 20 questions, just trying to get my budget finalized.

The pictured frame (above) is $135, but you don't technically require the far posts and beam. So, $120 without. Two PSU version would be $130:

Raymond_B

member

Activity: 504

Merit: 71

Just Getting Started...

Quote

Well, here's a model for one PSU (mounted near the IO area).

Another area to mount a second PSU could be added to the other/nearest side of the frame. Or, for others reading this, no areas to mount PSUs is also a possibility. Wink

What would pricing be for the model pictured and the 2 PSU setup? Sorry for 20 questions, just trying to get my budget finalized.

Spotswood

sr. member

Activity: 512

Merit: 250

Quote from: Raymond_B on January 07, 2018, 12:59:46 AM

Quote from: Spotswood on January 07, 2018, 12:54:34 AM

Quote from: Raymond_B on January 07, 2018, 12:16:05 AM

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20, two for +$35 or four for +$50 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

What all would I need if I wanted to utilize all 12 GPUs? I imagine the tray would need to support two rows of fans, with the 2nd row cooling the 4 additional GPUs? Would there be room for two power supplies as well?

I have another design to support all 12 GPUs.

Do you require mounting the PSUs to the frame? If so, how many PSUs?

2 PSUs max, I'd like to mount them, but if it would take a lot of custom work I'll find one large setup or just not mount the 2nd to the frame.

Well, here's a model for one PSU (mounted near the IO area).

Another area to mount a second PSU could be added to the other/nearest side of the frame. Or, for others reading this, no areas to mount PSUs is also a possibility. Wink

Raymond_B

member

Activity: 504

Merit: 71

Just Getting Started...

Quote from: Spotswood on January 07, 2018, 12:54:34 AM

Quote from: Raymond_B on January 07, 2018, 12:16:05 AM

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20, two for +$35 or four for +$50 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

What all would I need if I wanted to utilize all 12 GPUs? I imagine the tray would need to support two rows of fans, with the 2nd row cooling the 4 additional GPUs? Would there be room for two power supplies as well?

I have another design to support all 12 GPUs.

Do you require mounting the PSUs to the frame? If so, how many PSUs?

2 PSUs max, I'd like to mount them, but if it would take a lot of custom work I'll find one large setup or just not mount the 2nd to the frame.

Spotswood

sr. member

Activity: 512

Merit: 250

Quote from: Raymond_B on January 07, 2018, 12:16:05 AM

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20, two for +$35 or four for +$50 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

What all would I need if I wanted to utilize all 12 GPUs? I imagine the tray would need to support two rows of fans, with the 2nd row cooling the 4 additional GPUs? Would there be room for two power supplies as well?

I have another design to support all 12 GPUs.

Do you require mounting the PSUs to the frame? If so, how many PSUs?

Raymond_B

member

Activity: 504

Merit: 71

Just Getting Started...

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20, two for +$35 or four for +$50 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

What all would I need if I wanted to utilize all 12 GPUs? I imagine the tray would need to support two rows of fans, with the 2nd row cooling the 4 additional GPUs? Would there be room for two power supplies as well?

impeached

newbie

Activity: 6

Merit: 0

Looks awesome. I'm interested in purchasing the version with two fan bars. I sent you a DM.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Eyedol-X on December 03, 2017, 10:44:28 PM

definitely interested in what this would look like with 8 watercooled GPU's installed.

well I do have the thread with it built.

I did 7 watercooled and a wirefree 1050ti

@ spotswood I want another frame please

and the measurement you want last card to inside of frame is 435 or 436 mm

here is the build

https://bitcointalksearch.org/topic/m.26910837

just a little lots more on the thread

Hey if you want to see the spotswood build on youtube

Eyedol-X

hero member

Activity: 952

Merit: 508

definitely interested in what this would look like with 8 watercooled GPU's installed.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Spotswood on December 01, 2017, 05:03:20 PM

Quote from: philipma1957 on December 01, 2017, 10:32:36 AM

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20 or two for +$35 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

its this the two support beam setup?

No. The image you quoted I thought would be a good setup for your radiator cooled GPUs. Or, the radiators could be mounted horizontally over the GPUs. Whatever you want Phil. Grin

How for one case with the radiator supports?
Shipped to:

Philip

along with the onda b250 board i lent you to measure

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Spotswood on December 01, 2017, 05:03:20 PM

Quote from: philipma1957 on December 01, 2017, 10:32:36 AM

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20 or two for +$35 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

its this the two support beam setup?

No. The image you quoted I thought would be a good setup for your radiator cooled GPUs. Or, the radiators could be mounted horizontally over the GPUs. Whatever you want Phil. Grin

That one looks good for the radiators.

I will pm.

Spotswood

sr. member

Activity: 512

Merit: 250

Quote from: philipma1957 on December 01, 2017, 10:32:36 AM

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20 or two for +$35 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

its this the two support beam setup?

No. The image you quoted I thought would be a good setup for your radiator cooled GPUs. Or, the radiators could be mounted horizontally over the GPUs. Whatever you want Phil. Grin

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Spotswood on November 30, 2017, 03:54:19 PM

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $65 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20 or two for +$35 (includes all required fasteners for 25mm thick fans).

Lead time is currently 2-3 business days.

its this the two support beam setup?

Spotswood

sr. member

Activity: 512

Merit: 250

Quote from: crazydane on November 30, 2017, 04:52:37 PM

Looks good!

Would certainly help clean up the rats nest I currently have:
...

Any pics of the fan support beam with fans installed? I'm having a hard time visualizing where they would mount exactly.

The fan beams would pretty much look the same as the ones for the 6 GPU Onda board:

crazydane

full member

Activity: 558

Merit: 194

Looks good!

Would certainly help clean up the rats nest I currently have:

Any pics of the fan support beam with fans installed? I'm having a hard time visualizing where they would mount exactly.

Spotswood

sr. member

Activity: 512

Merit: 250

This all aluminum open-air frame for the ONDA B250 motherboard (8 GPU) is $95 USD .

PayPal only. Shipped from Washington state, US.

The optional fan support beam is +$20, two beams for +$35 or four for +$50 (includes all required fasteners for 25mm thick fans).

Lead time is currently 5-6 business days.

Topic: [FS] All aluminum open-air frame for ONDA B250 motherboard (8 GPU) (Read 987 times)