[FS] GPU-ONLY mining frames (free shipping)

suklee

member

Activity: 67

Merit: 10

Quote from: MLN84 on November 14, 2017, 05:22:41 PM

The frame arrived from Hong Kong today after 8 days of travelling. It was sent on monday (6th november) and i picked it up at customs office (Germany) on tuesday, one week later. I had to pay 16,17 Euro on top of the 100 USD, but they were totally worth it (imo). If anyone knows, how suklee could improve the paperwork for direct shipping to customers, feel free to share your knowledge.

I have prepared some pictures with comments on imgur: https://imgur.com/a/FnCQ5

+++

Quick shipment
GPU frame is well constructed and easily put together
fits nicely into the Rosewill L4500
the fan holes let you use the black fan boxes of the case, allowing a closed front for better airflow and/or better use of space inside the case
GPUs hold rocksteady and have enough space around them to catch some air

---

i didn't see suitable holes to fasten the frame inside the case, although there are enough screws and equipment to do so (i worked with double sided foam tape on the two bottom rails, which works perfectly fine)
Putting the fan boxes on the frame requires a lot of patience

After all, i am very satisfied. Thank you!

Thank you for your comments and especially the photos. Happy mining!

MLN84

newbie

Activity: 28

Merit: 0

The frame arrived from Hong Kong today after 8 days of travelling. It was sent on monday (6th november) and i picked it up at customs office (Germany) on tuesday, one week later. I had to pay 16,17 Euro on top of the 100 USD, but they were totally worth it (imo). If anyone knows, how suklee could improve the paperwork for direct shipping to customers, feel free to share your knowledge.

I have prepared some pictures with comments on imgur: https://imgur.com/a/FnCQ5

+++

Quick shipment
GPU frame is well constructed and easily put together
fits nicely into the Rosewill L4500
the fan holes let you use the black fan boxes of the case, allowing a closed front for better airflow and/or better use of space inside the case
GPUs hold rocksteady and have enough space around them to catch some air

---

i didn't see suitable holes to fasten the frame inside the case, although there are enough screws and equipment to do so (i worked with double sided foam tape on the two bottom rails, which works perfectly fine)
Putting the fan boxes on the frame requires a lot of patience

After all, i am very satisfied. Thank you!

MLN84

newbie

Activity: 28

Merit: 0

Great, thank you for your work! I have already replaced my Silverstone Strider PSU with a Be Quiet Dark Power Pro, with more flexible and sleeved cables. And the stock fans will get out for 3x Enermax D.F. Storm 12.

So i definitely like to try your gpu frame.

Please PM me prices (with and without fan mount) and (preferably) a paypal address. Or just the latter, other users might be interested in prices too.

suklee

member

Activity: 67

Merit: 10

Made further improvements with a fan mount - do you want this as well or just the frame to hold your GPUs?

About the 14.8cm width of the card, you may not be able to close the top part of the case because the PCI-e power cables will get in the way:

MLN84

newbie

Activity: 28

Merit: 0

That looks very good, thank you! Can you please check if my biggest card with 14,8 cm in width (Zotac 1070 AMP! Extreme) would fit? If yes, please PM me with a price incl. shipping to Germany.

suklee

member

Activity: 67

Merit: 10

Here are some pics of the frame inside the Rosewill

suklee

member

Activity: 67

Merit: 10

I am giving away a Wordfence premium key (valid for 1 year) to the next customer from bitcointalk. So if you have a WordPress website and want to get into mining, now is a good time to buy my gpu mining frame Wink

https://www.wordfence.com/#features

suklee

member

Activity: 67

Merit: 10

Sorry for late reply, just got back from trip - good news is the LSV-4500 has arrived! Will do some testing with it next few days and come back to you Grin

MLN84

newbie

Activity: 28

Merit: 0

Well it's pretty narrow, due to the 3 big cards.

I uploaded a picture here: https://img2.picload.org/image/dgwrrror/mln84.jpg

What do you think?

MLN84

newbie

Activity: 28

Merit: 0

My rig is going to have 6 gpus in the front, because there are two 3-slot-cards. For usual 2 slot cards, i think the Rosewill case easily takes 7 in the front.

But i won't need space / holes for fans anymore. Because i will try to get the included fans in their black boxes on the inner bracket and move it to the front, as in the video. When i'm done with it, i will measure the free space again.

suklee

member

Activity: 67

Merit: 10

Quote from: MLN84 on October 18, 2017, 11:51:03 AM

Got my Rosewill case today. The inner dimensions are:

Height: max 17cm
Width: max 41cm

From the front to the mainboard, it has around 40cm of space.

Let me know, when you need more info.

Edit:

Got rid of the hdd cages (+ three front fans)
I can freely place the middle fan "wall". i guess it goes close to the mainboard (My Asrock H110 Pro BTC+ has a width of around 21 cm) with enough space left for the psu cables. Edit 2: Or maybe to the front, as done here: https://www.youtube.com/watch?v=BEsev9vTeHI
I could use the other long and thin piece as gpu holder in the front. But i hope you come up with something less improvisational than me

Thanks for the notes & measurements. Can definitely reserve space for fans... I've placed my order for the RSV-L4500, will take 1-2 weeks to reach me. Will keep you updated, in the meantime feel free to PM me any additional requirements you can think of.

Once I receive the case I will be able to build a sturdy internal frame. How many cards are you looking to fit, 6 or 7?

MLN84

newbie

Activity: 28

Merit: 0

Got my Rosewill case today. The inner dimensions are:

Height: max 17cm
Width: max 41cm

From the front to the mainboard, it has around 40cm of space.

Let me know, when you need more info.

Edit:

Got rid of the hdd cages (+ three front fans)
I can freely place the middle fan "wall". i guess it goes close to the mainboard (My Asrock H110 Pro BTC+ has a width of around 21 cm) with enough space left for the psu cables. Edit 2: Or maybe to the front, as done here: https://www.youtube.com/watch?v=BEsev9vTeHI
I could use the other long and thin piece as gpu holder in the front. But i hope you come up with something less improvisational than me

MLN84

newbie

Activity: 28

Merit: 0

Quote from: suklee on October 17, 2017, 02:50:35 AM

Might take a while for my Rosewill to arrive - once yours does please send me more details about the internals and I’ll see what I can do.

I will asap. Seems like Amazon.DE has some delays resp. not the same infos like Hermes (the shiping company). The latter say, i have to wait until wednesday or even thursday.

suklee

member

Activity: 67

Merit: 10

Quote from: MLN84 on October 16, 2017, 10:13:57 AM

Yes, it's that one (Rosewill 4U RSV-L4500), still haven't arrived today.

Looking forward to your results and an offer.

Thank you very much.

If you need this info: I am using one GPU on the mainboard, and 6 in the front (2x triple slot and 4x dual slot). Anyways, your approach with nuts and screws instead of pre-drilled holes for each gpu bracket would give me the flexibility for now and future changes of the hardware.

Might take a while for my Rosewill to arrive - once yours does please send me more details about the internals and I’ll see what I can do.

Quote from: sk33ty on October 16, 2017, 06:35:49 PM

Wow. Willing to do a custom model? Sounds at least like you're serious about this product/service. Good luck!

Sure, why not? Potential business and potential future product... win-win

suklee

member

Activity: 67

Merit: 10

Quote from: qctechno on October 16, 2017, 10:37:41 PM

Do you ship to Canada ?
Wanna get rid of my plywood frame Tongue

Absolutely! But since the original post I’ve discovered shipping to Canada is quite expensive (30 USD) so I should probably adjust the list prices.

Let me know which size you are interested in, how many cards do you have?

qctechno

sr. member

Activity: 307

Merit: 250

Do you ship to Canada ?
Wanna get rid of my plywood frame Tongue

sk33ty

newbie

Activity: 10

Merit: 0

Quote from: suklee on October 14, 2017, 10:26:58 PM

@MLN84

Hello, PM me if you can't find something that fits, can try to do a custom model for you.

Wow. Willing to do a custom model? Sounds at least like you're serious about this product/service. Good luck!

MLN84

newbie

Activity: 28

Merit: 0

Yes, it's that one (Rosewill 4U RSV-L4500), still haven't arrived today.

Looking forward to your results and an offer.

Thank you very much.

If you need this info: I am using one GPU on the mainboard, and 6 in the front (2x triple slot and 4x dual slot). Anyways, your approach with nuts and screws instead of pre-drilled holes for each gpu bracket would give me the flexibility for now and future changes of the hardware.

suklee

member

Activity: 67

Merit: 10

Quote from: MLN84 on October 15, 2017, 03:34:57 AM

Thank you! We can definitely try that, if it won't exceed the price for the 6-gpu-version that much. I am still interested. I think, my case arrives on monday. And i'll give you the exact dimensions on the inside then.

Is this the same model you have? https://www.amazon.com/Rosewill-Rackmount-Computer-Pre-Installed-RSV-L4500/dp/B0091IZ1ZG

I'll try to pick up a case myself for testing.

MLN84

newbie

Activity: 28

Merit: 0

Thank you! We can definitely try that, if it won't exceed the price for the 6-gpu-version that much. I am still interested. I think, my case arrives on monday. And i'll give you the exact dimensions on the inside then.

suklee

member

Activity: 67

Merit: 10

@MLN84

Hello, PM me if you can't find something that fits, can try to do a custom model for you.

MLN84

newbie

Activity: 28

Merit: 0

Hallo, this is exactly what i need.

Does the 6 gpu version fit into a Rosewill RSV L4500? Width and height wise? Can't measure the case right now, because it's still in shipment until next week.

How about shipment to Germany? Ebay page says worldwide free shipping. How about customs and taxes, do you have any experience from clients to share?

Greetings

Edit:

Took the 6 GPU frame dimensions from your website (42 x 28 x 20 cm). Is it 42cm with or without the feet?

DYOR: The 20 cm in height seem to be too much anyways. The RSV-L4500 comes with this outer dimensions already: 53,34 x 42,67 x 17,78 cm

Well, then i have to go with wood too or find another (smaller) bracket, that ships to GER.

Cheers

suklee

member

Activity: 67

Merit: 10

small bump

suklee

member

Activity: 67

Merit: 10

Bump.

(I am also selling on eBay if you prefer its buyer protection mechanisms)

suklee

member

Activity: 67

Merit: 10

Quote from: isoneguy on March 09, 2017, 03:52:02 AM

I was thinking about this product a couple weeks ago when I upgraded to a 10lb wooden block.

pm me about an 8gpu one these frames are everything I need.

PM on the way!

isoneguy

hero member

Activity: 518

Merit: 501

I was thinking about this product a couple weeks ago when I upgraded to a 10lb wooden block.

pm me about an 8gpu one these frames are everything I need.

suklee

member

Activity: 67

Merit: 10

I made a variety of aluminum mining frames that can hold between 2-8 GPUs.

These aluminium frames hold only GPUs - perfect for those new to GPU mining or for placing next to your existing desktop. Replaces your wooden shoe rack - just add USB risers and you are ready to start mining!

Tested with RX480s/RX470s. Both horizontal GPU support beams are adjustable.

PayPal accepted and shipping is included (will only ship to your verified PayPal address)
BTC payments can enjoy further discount.

2 GPU - $50 USD
4 GPU - $55 USD
6 GPU - $64 USD
8 GPU - $72.50 USD

Sample photos:

2 GPU

4 GPU

PM for bulk orders or other enquiries.

Shipping

Frames are in stock and will usually ship within 1 business day!

Shipping is free for the following countries:
United States, Canada, Brazil, Russia, Netherlands, Switzerland, Norway, Sweden, Denmark, Australia, New Zealand, Japan, South Korea, Singapore, Cambodia, Indonesia, Macao , Malaysia, Philippines

Topic: [FS] GPU-ONLY mining frames (free shipping) (Read 1553 times)