Updated prices to reflect market and original post to reflect items sold.
~Thanks
Topic: FS: RaspberryPi RGB Positive LCD & rPi Cases (Read 760 times)
Updated prices / Added more / Added Picture
I have some left over screens, everything is soldered & ready for you to plug on to your RaspberryPi.
RGB Negative LCD Video
RGB Positive LCD Video
Retail on each screen is $25 (as a kit, not soldered)...
Would like to get them off my work-bench, so BTC0.1250 including shipping within the US
I also have a lot of random spare RaspberryPi Cases (lol):
6x 4x RaspberryPi Cases, each one @ BTC0.0503 including shipping within the US
(the 3x custom 3D-printed cases cost me $60 alone) - All the cases you can fit an LCD on to, the 3D cases were made for the LCD, the other 3 have GPIO access which you can attach the LCD on the outside of the case through the GPIO access.
2x One From ModMyPi.com - Bought them before RaspberryPi's even got released, fits both versions, my order actually got lost in the mail (shipped from UK) then ended up finding me almost a year later.
1x Adafruit Cyrstal Blue Case
3x Custom 3D Printed Cases - I had these prototyped locally, each one is a little different case #4 (black) hasn't been modified, case #5 (black) was modified with a SD card cut out, rear holes drilled for extra venting, and power adapter hole made so you didn't need to unplug the rPi to put in or out of the case. Case #6 (blue) was shaved down on the back side to make it flush.
PM or Post if interested.
RGB Positive LCD Video
Retail on each screen is $25 (as a kit, not soldered)...
Would like to get them off my work-bench, so BTC0.1250 including shipping within the US
I also have a lot of random spare RaspberryPi Cases (lol):
(the 3x custom 3D-printed cases cost me $60 alone) - All the cases you can fit an LCD on to, the 3D cases were made for the LCD, the other 3 have GPIO access which you can attach the LCD on the outside of the case through the GPIO access.
3x Custom 3D Printed Cases - I had these prototyped locally, each one is a little different case #4 (black) hasn't been modified, case #5 (black) was modified with a SD card cut out, rear holes drilled for extra venting, and power adapter hole made so you didn't need to unplug the rPi to put in or out of the case. Case #6 (blue) was shaved down on the back side to make it flush.
PM or Post if interested.
Jump to: