Author

Topic: Futurebit Moonlander2 question (Read 113 times)

hero member
Activity: 748
Merit: 523
November 16, 2021, 06:27:25 AM
#7
So basically I can't do any value under 384, what would happen if I set it to 100? It won't start?

Not sure but i think it switchs to default frec, which I do not remenber now :-)

Sure it works well without fan at 384 (also a bit more), it will get very hot, but it works.

If Moonlander2 gets too hot, it stops mining (hang). This is a good test.

You can use USB cable to protect USB connector at MOBO.
newbie
Activity: 22
Merit: 0
November 15, 2021, 06:13:52 AM
#6
Right I want to save energy and I don't want to get annoyed by the noise, so as you can see, they are 2 problems to me.
member
Activity: 155
Merit: 14
November 15, 2021, 01:59:47 AM
#5
Thank you.

So basically I can't do any value under 384, what would happen if I set it to 100? It won't start?

Just in case it is mandatory to use the least hash rate of 384, can I unplug the fan? Is that Okay? as it makes really noisy sound even my desk is vibrating lol

I don't want to burn the unit.

Why do you want to set the frequency so low? To save energy or disable the fan?
When my fan was broken I removed it and had a 60mm fan blowing on the Moonlander 2 that worked fine and was not so loud.
You can even use a bigger fan but I think it doesn't work without a fan.
newbie
Activity: 22
Merit: 0
November 14, 2021, 04:43:26 PM
#4
Thank you.

So basically I can't do any value under 384, what would happen if I set it to 100? It won't start?

Just in case it is mandatory to use the least hash rate of 384, can I unplug the fan? Is that Okay? as it makes really noisy sound even my desk is vibrating lol

I don't want to burn the unit.

Please advice
hero member
Activity: 748
Merit: 523
November 14, 2021, 08:39:35 AM
#3
Moonlander 2: supported frecs in MHz

384, 450, 480, 540, 576, 600, 612, 625, 636, 648, 660, 672, 684, 700, 720, 744, 756, 768, 796, 832, 852, 876, 900

I used 720 MHz for 4 MHs, stable.
copper member
Activity: 2114
Merit: 1814
฿itcoin for all, All for ฿itcoin.
November 13, 2021, 06:22:40 PM
#2
Try contacting this guy. He seems to be the representative here - stefanop

You could also inquire from this thread though it seems to be in active at the moment so a PM or a livechat on their official site would be much helpful to you
newbie
Activity: 22
Merit: 0
November 13, 2021, 04:12:40 PM
#1
Hi,
I have the new Futurebit Moonlander 2, and I want to know what is the minimum frequency I can use to mine, this unit support up to 5Mh but for testing purposes, i want to mine with K/hash.

Please advice.

Thanks
Jump to: